1. Proizvod je gotovview
The Baseus EnerFill FE11 is a high-performance 100W multi-port charger designed for rapid and efficient charging of various electronic devices, including laptops, tablets, and smartphones. It features two USB-C ports and one USB-A port, allowing for simultaneous charging of up to three devices. Its compact design and advanced safety features make it an ideal power solution for both travel and daily use.
Slika: Kutna view of the Baseus EnerFill FE11 100W charger, highlighting its two USB-C and one USB-A output ports.
2. Upute za postavljanje
- Spojite na napajanje: Plug the charger into a standard wall outlet. Ensure the outlet provides the correct voltage as specified in the product specifications.
- Povežite uređaje: Use appropriate charging cables (not included) to connect your devices to the charger's USB-C or USB-A ports. For optimal fast charging, use cables that support high power delivery.
- Provjerite punjenje: Once connected, your device should indicate that it is charging. The charger will intelligently distribute power based on the connected devices' requirements.
3. Upute za rad
3.1 Istovremeno punjenje
The EnerFill FE11 charger supports charging up to three devices concurrently. The power output will be dynamically allocated across the ports based on the connected devices' power demands. For example, a laptop may receive 65W, a tablet 20W, and a smartphone 15W when all three are connected.
Image: Illustration of the charger powering a laptop (65W), tablet (20W), and smartphone (15W) simultaneously.
3.2 Mogućnost brzog punjenja
The charger delivers up to 100W of power through its USB-C ports, enabling rapid charging for compatible laptops. For instance, a 16-inch MacBook Pro (M4) can be charged to 100% in approximately 1.77 hours using a USB-C port.
Image: The charger connected to a laptop, demonstrating 100W maximum power delivery via USB-C.
3.3 Univerzalna kompatibilnost
The EnerFill FE11 supports multiple fast charging protocols, including PD3.0, QC3.0, and PPS, ensuring broad compatibility with a wide range of devices. This includes various models of smartphones, tablets, and laptops from different manufacturers.
Image: Visual representation of the charger's compatibility with smartphones (e.g., iPhone, Samsung), tablets (e.g., iPad), laptops (e.g., MacBook, Dell), and other devices (e.g., AirPods, DJI drones).
4. Sigurnosne značajke
The charger incorporates advanced safety mechanisms, including polymer silicon-based heat dissipation and intelligent temperature control (BCT technology). These features effectively prevent overheating during prolonged use, protecting both the charger and your connected devices, thereby extending battery life.
Slika: Eksplodirano view illustrating the polymer silicon-based heat dissipation layers within the charger.
5. Prenosivost
Designed for convenience, the EnerFill FE11 features a compact and lightweight form factor, making it highly portable. It is up to 43% smaller than traditional chargers, ideal for travel and remote work. Its scratch-free design ensures durability during transport.
Image: Comparison showing the charger's compact size relative to other chargers, and a hand holding the device to emphasize its portability.
6. Specifikacije
| Značajka | Detalj |
|---|---|
| Naziv modela | EnerFill FE11 |
| Marka | Baseus |
| Izlazna snaga | 100 W (maks.) |
| luke | 2x USB-C, 1x USB-A |
| Kompatibilni uređaji | Laptops, Tablets, Smartphones, etc. |
| Podržani protokoli | PD3.0, QC3.0, PPS |
| Dimenzije (D x Š x V) | 10 x 8 x 10 cm (približno) |
| Broj modela | YG01010003054 |
7. Rješavanje problema
- Uređaj se ne puni:
- Provjerite je li punjač sigurno uključen u ispravnu utičnicu.
- Check that the charging cable is properly connected to both the charger and the device.
- Verify that the charging cable is not damaged and supports the required power delivery.
- Try a different port or cable.
- Sporo punjenje:
- Ensure your device and cable support fast charging protocols (PD, QC, PPS).
- If multiple devices are connected, the power output is shared. Disconnect less critical devices to prioritize charging for a specific device.
- Check the device's charging input requirements; some devices may not draw full 100W.
- Pregrijavanje punjača:
- While the charger has built-in temperature control, excessive heat can occur in poorly ventilated areas or under heavy load. Ensure adequate airflow around the charger.
- If the charger becomes excessively hot, disconnect it from the power source and all devices, and allow it to cool down before reuse.
8. Održavanje
- Čišćenje: Prije čišćenja isključite punjač iz utičnice. Za brisanje površine koristite meku, suhu krpu. Nemojte koristiti tekuća sredstva za čišćenje ili abrazivne materijale.
- Skladištenje: Store the charger in a cool, dry place away from direct sunlight and extreme temperatures. Avoid storing it in humid environments.
- Rukovanje: Izbjegavajte ispuštanje punjača ili izlaganje jakim udarcima. Ne pokušavajte sami rastavljati ili popravljati punjač.
9. Jamstvo i podrška
For information regarding warranty coverage, technical support, or service, please refer to the official Baseus webweb-mjesto ili se obratite prodavaču. Sačuvajte račun kao dokaz o kupnji za slučaj zahtjeva za jamstvo.