SMARTRISE C4 Link 2 Programmer

Nadview

Ovaj dokument pruža detaljne upute za preuzimanje, instaliranje i korištenje Link2 programatora s C4 kontrolerima. Objašnjava kako učitati softver na C4 kontroler pomoću Link2 programatora.

Required Tools for Software Programming

Za programiranje softvera potrebni su sljedeći alati:

1.  Prijenosno računalo s operativnim sustavom temeljenim na Windowsima.
2. Link2 programer.
3. Controller software: The original controller software is stored on a flash drive inside the white job binder. If the flash drive is missing or contains outdated prints and software, Smartrise can provide a webpoveznica za pristup najnovijem softveru i ispisima.

Application Download Instructions

Za učitavanje softvera na Smartrise kontroler, potrebno je preuzeti aplikaciju za programiranje na prijenosno računalo. Ova aplikacija dostupna je na USB pogonu. Slijedite ove korake za preuzimanje aplikacije C4 Link2 Programmer:

1. Otvorite flash pogon.
2. Navigate to (5) – Smartrise Programs and open the folder
3. Pronađite i otvorite mapu C4 Programmer.
4. Download and run both applications on the laptop. Some laptops may have firewalls that prevent applications from downloading. For assistance, contact the system administrator.
5. Once completed, the two applications should appear on the desktop.
   NOTE: MCUXpresso does not need to be opened, only installed on the laptop.

Software Loading Instructions

Kako bi se osigurala ispravna funkcionalnost, softver kontrolera mora se učitati na Smartrise kontroler pomoću Link2 programatora. Slijedite korake u nastavku kako biste dovršili postupak:

1. Connect the Link2 Programmer to the laptop via the USB port.
2. Open the C4 Link2 Programmer by double-clicking its icon. The application will automatically update to the latest version if connected to the internet. Ensure the application is up to date before proceeding.
3. Pregledajte softver kontrolera:
   1. Open (1) – Controller Software.
   2. Odaberite mapu s nazivom zadatka.
   3. Odaberite automobil za koji želite učitati softver.
   4. Kliknite Odaberi mapu pri dnu prozora.
   5. Select the processor to update using the dropdown menu. Processors can be updated in any order:
      • GOSPODIN A: GOSPODIN MCUA
      • GOSPODIN B: GOSPODIN MCUB
      • SRU A: CT i COP MCUA
      • SRU B: CT and COP MCUB
      • Podizna ploča/Proširenje: Podizna ploča/Ploča za proširenje

Priključci za procesor mogu se naći na ploči.

Start the software loading process by clicking the Start button.

Važno: Prilikom programiranja MR SRU-a, to može utjecati na druge automobile u grupi. Kako biste to spriječili, odspojite grupne priključke na ploči.

A new window will appear, and the software download will begin. Once complete, a confirmation message will be displayed.

NAPOMENA: Ako preuzimanje softvera ne uspije, pokušajte sljedeće:

1. Retry the process.
2. Koristite drugi USB priključak.
3. Power cycle the controller.
4. Ensure the Link2 Programmer is properly connected.
5. Ponovno pokrenite prijenosno računalo.
6. Try a different Link2 Programmer.
7. Use a different laptop.
8. Contact Smartrise for assistance.

• Click Edit to continue loading software for the remaining processors and follow the previous steps.
• Once all software uploads are complete, reconnect the group terminals and power cycle the controller.
• Verify the software version under Main Menu | About | Vers.
• Pomaknite se prema dolje do view sve opcije i potvrdite da je prikazana očekivana verzija.

FAQ

Q: What should I do if I encounter errors during software loading?

A: If you encounter errors during software loading, ensure that all connections are secure and try restarting the process. If issues persist, contact Smartrise support for assistance.

Dokumenti / Resursi

SMARTRISE C4 Link 2 Programmer [pdfUpute C4 Link 2 Programmer, C4, Link 2 Programmer, Programmer

Reference

• korisnički priručnik