Uvod
Thank you for choosing the SUITU Portable Multi-Functional Car Tire Inflator. This compact and powerful device is designed to quickly and efficiently inflate car tires, bicycle tires, motorcycle tires, sports balls, and other inflatables. Featuring a robust permanent magnet motor, it provides strong inflation power for various needs. This manual will guide you through the setup, operation, and maintenance of your new tire inflator.
Sigurnosne informacije
- Always ensure the inflator is connected to a 12V DC power source (car cigarette lighter socket).
- Nemojte ostavljati pumpu za napuhavanje bez nadzora dok radi.
- Avoid continuous operation for more than 10-15 minutes to prevent overheating. Allow it to cool down before resuming use.
- Čuvati izvan dohvata djece.
- Ne izlažite pumpu za napuhavanje kiši ili vlazi.
- Ensure the tire valve is clean and free of debris before attaching the hose.
Sadržaj paketa
- SUITU Car Tire Inflator (Model ST-217)
- Crijevo za napuhavanje
- Razni adapteri za mlaznice (za lopte, bicikle itd.)
- korisnički priručnik
Postavljanje
- Prepare the Inflator: Remove the inflator from its packaging. Ensure the inflation hose is securely attached to the pump.
- Spojite na napajanje: Plug the inflator's 12V power cable into your vehicle's cigarette lighter socket. Ensure your vehicle's engine is running to provide stable power.
- Pristupni ventil za gume: Skinite poklopac za prašinu s ventila gume.
- Attach Hose to Valve: Securely screw or clip the inflation hose connector onto the tire valve stem. Ensure a tight seal to prevent air leakage.
Upute za rad
- Provjerite trenutni tlak: Once connected, the display (if digital) or analog gauge will show the current tire pressure.
- Set Desired Pressure (Digital Models Only): For models with a digital display, use the '+' and '-' buttons to set your desired tire pressure. The inflator will automatically stop when this pressure is reached.
- Početak inflacije: Flip the power switch on the inflator to the 'ON' position. The pump will begin to inflate the tire.
- Monitor tlaka: Keep an eye on the pressure gauge (digital or analog) during inflation.
- Zaustavite inflaciju: Once the desired pressure is reached, switch the inflator to the 'OFF' position. For digital models, it will stop automatically.
- Prekini vezu: Carefully detach the inflation hose from the tire valve and replace the dust cap.
Ugrađeno LED svjetlo
Some models are equipped with a built-in LED light for illumination during nighttime or low-light conditions. Activate the light by pressing the dedicated light button, usually located on the side of the unit.
Demonstracijski video
Video demonstrating the SUITU Car Inflation Pump in use, from retrieving it from the trunk to inflating a flat tire and showcasing its built-in light.
Održavanje
- Čišćenje: Obrišite vanjski dio napuhivača mekom, suhom krpom. Nemojte koristiti jake kemikalije ili abrazivna sredstva za čišćenje.
- Skladištenje: Store the inflator in a cool, dry place, away from direct sunlight and extreme temperatures. Ensure the hose and power cable are neatly coiled to prevent damage.
- Provjerite veze: Periodically inspect the inflation hose and power cable for any signs of wear or damage. Replace if necessary.
Rješavanje problema
- Inflator Not Turning On:
- Check if the 12V power plug is securely inserted into the car's cigarette lighter socket.
- Ensure the vehicle's engine is running.
- Provjerite osigurač vozila za utičnicu upaljača za cigarete.
- Tire Not Inflating / Slow Inflation:
- Ensure the inflation hose is securely attached to the tire valve without any leaks.
- Provjerite je li priključak za napajanje stabilan.
- Check if the desired pressure setting (for digital models) is higher than the current tire pressure.
- Pregrijavanje:
- If the unit feels hot, turn it off immediately and allow it to cool down for at least 15 minutes before further use.
Tehnički podaci
| Značajka | Specifikacija |
|---|---|
| Naziv marke | ODGOVARA |
| Naziv modela | ST-217 |
| Vrsta stavke | RADNI STROJEVI |
| Izvor napajanja | Corded Electric (12V DC Car Cigarette Lighter) |
| Podrijetlo | Kontinentalna Kina |
| Dimenzije (približno) | 19 cm (D) x 14 cm (V) x 8 cm (Š) |
| Težina (približno) | 0.731 kg |
| Display Type (Varies by Model) | Analog Gauge or Digital Display |
| Built-in Light (Varies by Model) | Da ili Ne |
Dostupne varijante
- Model A: No light, analog pointer display, wired.
Model A - Model B: Lighted pointer display, analog gauge, wired.
Model B - Model C: Digital display with light, wired.
Model C
Korisnički savjeti
- Izvor napajanja: This inflator is designed to operate using a 12V DC power source, typically found in your car's cigarette lighter socket. It is not compatible with 110V household outlets unless a suitable DC-to-AC power inverter is used (not included).
- Brza inflacija: For optimal performance and quick inflation, ensure your car engine is running while using the pump.
- Unaprijed postavljeni tlak: If your model has a digital display, take advantage of the pre-set pressure feature to avoid over-inflation.
- Svjetlo za hitne slučajeve: The built-in LED light (on applicable models) is very useful for roadside emergencies at night.
Jamstvo i podrška
For warranty information and customer support, please refer to the seller's policies or contact the point of purchase. Keep your purchase receipt as proof of purchase.
