XIGMATEK Connect Pro 360 All-in-one Liquid Cooler User Manual

1. Uvod

Thank you for choosing the XIGMATEK Connect Pro 360 All-in-one Liquid Cooler. This high-performance CPU cooling solution features a 7-inch magnetic display LCD screen, vibrant ARGB lighting, and is designed to provide exceptional heat dissipation for optimal CPU performance. The integrated LCD screen supports display duplication or extension modes for Windows 10 and 11, offering enhanced functionality and customization.

This manual provides detailed instructions for installation, operation, maintenance, and troubleshooting to ensure you get the best experience from your product. Please read this manual thoroughly before installation and keep it for future reference.

2. Sadržaj paketa

Molimo provjerite sadržaj paketa kako biste bili sigurni da su svi artikli prisutni i u dobrom stanju:

• Connect Pro 360 Radiator with integrated fans
• CPU Pump Head with Magnetic LCD Module
• Mounting Brackets for Intel and AMD Sockets
• Backplates and Screws for various CPU sockets
• Termalna pasta
• Mini ARGB LED kontroler
• Type-C Cable for LCD Module
• korisnički priručnik

3. Specifikacije

4. Vodič za instalaciju

Before you begin, ensure your system is powered off and unplugged from the wall outlet. Refer to your motherboard manual for specific CPU socket information.

4.1. Pripremite utičnicu procesora

1. Odredite vrstu utora vašeg procesora (Intel LGA ili AMD AM).
2. Attach the appropriate backplate to the rear of your motherboard if required for your socket.
3. Install the correct mounting standoffs onto the motherboard around the CPU socket.

4.2. Ugradite radijator i ventilatore

1. Determine the optimal mounting location for the 360mm radiator in your PC case (e.g., top, front).
2. Secure the radiator to the case using the provided screws. Ensure adequate airflow.
3. The fans are pre-installed on the radiator. If not, attach them to the radiator, ensuring the airflow direction is correct for your case's cooling strategy.

4.3. Montirajte glavu pumpe

1. Apply a thin, even layer of the included thermal paste onto the center of your CPU's integrated heat spreader (IHS).
2. Carefully place the pump head onto the CPU, aligning it with the mounting standoffs.
3. Pričvrstite glavu pumpe odgovarajućim vijcima ili maticama, zatežući ih dijagonalno dok ne budu čvrsto. Nemojte previše zategnuti.

4.4. Spojite kabele

1. Snaga pumpe: Connect the pump's 4-pin connector to the CPU_FAN or AIO_PUMP header on your motherboard.
2. Snaga ventilatora: Connect the radiator fans' 4-pin PWM connectors to available fan headers on your motherboard or to the included Mini ARGB LED Controller.
3. ARGB rasvjeta: Connect the 5V-3pin ARGB connectors from the fans and pump to the Mini ARGB LED Controller. Then, connect the controller's 5V-3pin ARGB cable to a compatible ARGB header on your motherboard (if you wish to control lighting via motherboard software) or use the controller's built-in modes. Power the controller via its SATA power connector from your PSU.
4. LCD Module: Connect the 7-inch magnetic LCD module to an available USB Type-C port on your motherboard or directly to your GPU (if it has a Type-C output) using the provided Type-C cable.

4.5. Software Installation for LCD Module

For the 7-inch LCD module to function as a secondary monitor (duplicate or extend mode), a software driver is required. Please visit the official XIGMATEK website or the product page to download the latest display software/driver for Windows 10 or 11. Follow the on-screen instructions for installation.

5. Operacija

5.1. Početno uključivanje

After completing the installation and software setup, power on your PC. The fans and pump should start operating, and the ARGB lighting should illuminate. The 7-inch LCD module should display content once the necessary drivers are installed and configured.

5.2. LCD Module Functionality

• Načini prikaza: The 7-inch LCD module supports display duplication (mirroring your main display) or extension mode (acting as a secondary monitor) for Windows 10 and 11. These settings can be configured through your operating system's display settings.
• Magnetic Removable Design: The LCD module is magnetically attached to the pump head, allowing for easy removal and rotation to achieve your desired viewing kut.

5.3. ARGB upravljanje rasvjetom

The ARGB lighting for the fans and pump can be controlled in two ways:

• Softver matične ploče: If connected to a compatible 5V-3pin ARGB header on your motherboard, you can use your motherboard's RGB software (e.g., ASUS Aura Sync, MSI Mystic Light, Gigabyte RGB Fusion, ASRock Polychrome Sync) to synchronize and customize lighting effects.
• Mini ARGB LED Controller: The included controller provides various pre-set lighting modes and colors. Use the buttons on the controller to cycle through effects, adjust brightness, and change speed.

5.4. Regulacija brzine ventilatora i pumpe

The fan and pump speeds are controlled via PWM (Pulse Width Modulation). You can manage these speeds through your motherboard's BIOS/UEFI settings or dedicated fan control software provided by your motherboard manufacturer. Adjusting these settings can optimize cooling performance and noise levels.

6. Održavanje

Redovito održavanje pomaže u osiguravanju dugotrajnosti i optimalnih performansi vašeg hladnjaka tekućine.

• Čišćenje prašine: Povremeno čistite rebra hladnjaka i lopatice ventilatora kako biste spriječili nakupljanje prašine, koja može ometati protok zraka i smanjiti učinkovitost hlađenja. Koristite komprimirani zrak ili meku četku.
• Tube and Connection Inspection: Visually inspect the tubes and connections for any signs of leaks, kinks, or damage. Address any issues promptly.
• Termalna pasta: While not frequently required, if you ever remove the pump head from the CPU, it is recommended to clean off the old thermal paste and apply a fresh layer before reinstallation.

7. Rješavanje problema

If you encounter issues with your XIGMATEK Connect Pro 360, refer to the following common problems and solutions:

• No Power to Fans/Pump:
  • Check all power connections (4-pin pump, 4-pin fans, SATA for ARGB controller) to ensure they are securely plugged into the motherboard and power supply.
  • Verify that the CPU_FAN/AIO_PUMP header is enabled in your motherboard's BIOS.
• Bez ARGB osvjetljenja:
  • Ensure the 5V-3pin ARGB connectors are correctly attached to the ARGB controller or motherboard header.
  • Confirm the ARGB controller is receiving SATA power.
  • Ako koristite softver matične ploče, provjerite je li ispravno instaliran i konfiguriran.
• LCD Module Not Displaying:
  • Check the Type-C cable connection to both the LCD module and your PC/GPU.
  • Ensure the display software/driver is correctly installed and updated.
  • Verify display settings in Windows (Display Settings) to ensure the secondary monitor is detected and configured for duplication or extension.
  • Isprobajte drugi USB Type-C priključak.
• Slabe performanse hlađenja:
  • Ensure the pump head is securely mounted to the CPU with adequate thermal paste.
  • Check for dust buildup on the radiator and fans, and clean if necessary.
  • Verify that fans are spinning at appropriate speeds (check BIOS/software).
  • Osigurajte pravilan protok zraka unutar kućišta računala.

8. Savjeti za korisnike

Maximize your experience with the Connect Pro 360 with these helpful tips:

• Optimize Fan Curves: Adjust fan curves in your motherboard's BIOS or software to balance cooling performance and noise levels according to your usage (e.g., quiet for browsing, performance for gaming).
• Prilagodite LCD zaslon: Experiment with different content on the 7-inch LCD screen. It can display system monitoring data, custom images, GIFs, or even act as a small secondary screen for chat applications or media controls.
• ARGB Synchronization: If your motherboard supports ARGB synchronization, connect all ARGB components (fans, pump, other case lighting) to the motherboard's ARGB headers to create a unified lighting theme.
• Uprava za kabele: Take time to manage the cables neatly. This not only improves aesthetics but also enhances airflow within your case, contributing to better cooling.

9. Jamstvo i podrška

XIGMATEK products are manufactured to the highest quality standards. For warranty information, technical support, or service inquiries, please refer to the warranty card included with your product or visit the official XIGMATEK webMolimo sačuvajte dokaz o kupnji za potrebe jamstva.