Growatt SPE 8000 ES, SPE 10000 ES, SPE 12000 ES

Growatt SPE ES Series Hybrid Solar Inverter User Manual

Models: SPE 8000 ES, SPE 10000 ES, SPE 12000 ES

1. Uvod

This manual provides essential information for the safe and efficient installation, operation, and maintenance of your Growatt SPE ES Series Hybrid Solar Inverter. The Growatt SPE ES series are single-phase hybrid solar inverters designed for residential solar energy systems, offering efficient power conversion and smart energy management. Please read this manual thoroughly before installation and operation.

Growatt SPE ES Hybrid Solar Inverter front view
Figure 1: Growatt SPE ES Hybrid Solar Inverter

2. Postavljanje

2.1 Raspakiranje i pregled

Carefully unpack the inverter and all accessories. Inspect the contents for any damage. If any components are missing or damaged, contact your supplier immediately.

Video 1: Unboxing and detailed view of the Growatt SPE ES Hybrid Solar Inverter, showcasing its components and connection ports.
Growatt SPE ES inverter s uključenom dodatnom opremom
Figure 2: Growatt SPE ES Inverter and included accessories.

2.2 Fizička instalacija

The inverter should be mounted in a well-ventilated area, away from direct sunlight and moisture. Ensure sufficient clearance around the unit for proper airflow. The dimensions of the inverter are approximately 550mm (W) x 465mm (H) x 150mm (D), and it weighs 21.5kg. Use appropriate mounting hardware to secure the inverter to a sturdy wall or frame.

Multiple Growatt SPE ES inverters installed in a residential setting
Slika 3: Nprample installation of Growatt SPE ES inverters.

2.3 Električni priključci

All electrical connections must be performed by a qualified electrician in accordance with local and national electrical codes. Ensure the inverter is switched off before making any connections.

2.3.1 Arhitektura sustava

The Growatt SPE ES inverter integrates into a comprehensive solar energy system, allowing for spontaneous use of generated power and uploading excess power to the grid. The system typically includes solar panels, the inverter, metering devices, the power grid, and local loads. Monitoring can be done via a Cloud Server, Shine Server, or Shine Phone application.

Diagram showing the system architecture of the Growatt SPE ES hybrid solar inverter, including solar panels, inverter, meters, power grid, load, and monitoring via cloud/phone.
Figure 4: System Architecture Diagram for Growatt SPE ES Inverter.

2.3.2 Priključci za povezivanje

The inverter features various connection ports for different components of your solar system:

  • PV1, PV2: Photovoltaic input terminals for solar panels.
  • AC ulaz: Connection for the AC grid supply.
  • GEN: Generator input terminal.
  • AC izlaz: Priključak za kućna opterećenja.
  • DC ulaz: Battery connection terminals.
  • CURRENT SHARING: For parallel operation with multiple inverters.
  • NC C BR.: Suhi kontakt za vanjsko upravljanje.
  • PAR-IN, PAR-OUT: Parallel communication ports.
  • BMS, RS485: Communication ports for Battery Management System and other devices.
  • WiFi/GPRS, USB: Data communication modules for monitoring.
  • ULAZNI PREKIDAČ: Integrated input breaker for safety.
Detaljan view of the Growatt SPE ES inverter's rear panel showing all connection ports and labels.
Slika 5: Stražnja ploča s priključnim priključcima.

3. Upute za rad

3.1 Uključivanje/isključivanje

  1. Ensure all electrical connections are secure and correct.
  2. Turn on the DC input switch (if present) and then the AC input breaker.
  3. Locate the 'ON/OFF' switch on the inverter and switch it to 'ON'.
  4. The inverter display will light up, indicating the startup sequence.
  5. To power off, reverse the sequence: switch the inverter to 'OFF', then turn off the AC input breaker, and finally the DC input switch.

3.2 Zaslon i kontrole

The inverter features an LCD display and control buttons for monitoring system status and adjusting settings.

  • Prikaz: Shows real-time data such as power generation, battery status, and error codes.
  • Buttons (ESC, UP, DOWN, ENTER): Koristi se za navigaciju izbornicima i potvrdu odabira na zaslonu.
Close-up of the Growatt SPE ES inverter's LCD display and control buttons.
Figure 6: Inverter display and control buttons.

3.3 Praćenje

The Growatt SPE ES inverter supports remote monitoring via WiFi or 4G communication modules. This allows you to track your system's performance using the Shine Phone app or through the Cloud Server/Shine Server platforms.

  • Shine Phone App: Download the official Growatt monitoring app to your smartphone for real-time data and alerts.
  • Cloud/Shine Server: Access detailed performance reports and historical data through the web portal.

4. Održavanje

4.1 Opća briga

  • Održavajte pretvarač čistim i bez prašine i ostataka. Za čišćenje koristite meku, suhu krpu.
  • Ensure that the ventilation openings (fans) are not blocked to prevent overheating.
  • Regularly check all cable connections for tightness and signs of wear or damage.

4.2 Uvjeti okoliša

To ensure optimal performance and longevity, the inverter should operate within the specified environmental conditions:

  • Raspon radne temperature: –10°C do +50°C
  • Relativna vlažnost: 5% do 95% (bez kondenzacije)
  • Nadmorska visina: <2000m
  • Stupanj zaštite: IP20 (Indoor use recommended, protect from water and dust ingress)

5. Rješavanje problema

If the inverter is not operating as expected, consider the following basic troubleshooting steps:

  • Nema napajanja/isključen zaslon: Check all AC and DC input connections and ensure the ON/OFF switch is in the 'ON' position. Verify power supply from the grid and solar panels.
  • Indikator greške uključen: Refer to the inverter's display for specific error codes. Consult the full Growatt user manual (if available) for detailed explanations of fault codes.
  • Niska izlazna snaga: Check solar panel connections and ensure they are clean and free from shading. Verify battery charge level if operating in backup mode.
  • Problemi s komunikacijom: Ensure WiFi/4G modules are correctly installed and configured. Check network connectivity.

For complex issues or if troubleshooting steps do not resolve the problem, please contact technical support.

6. Specifikacije

Below are the detailed specifications for the Growatt SPE ES Series Hybrid Solar Inverters:

Podatkovna tablica SPE 8000 ES SPE 10000 ES SPE 12000 ES
Ulazni podaci (DC)
Maks. preporučena PV snaga (za modul STC) 10000 W 12500 W 15000 W
Maks. DC voltage 550 V
Početak svtage 120 V
MPP svtage raspon 60 V-480 V
Broj MPP trackera 2
Broj PV nizova po MPP trackeru 1
Maks. ulazna struja po MPP trackeru 27A
Izlazni podaci (AC)
AC nazivna snaga 8000 W 10000 W 12000 W
Maks. AC prividna snaga 8000VA 10000VA 12000VA
Nazivni AC voltage 230 V
Mrežna frekvencija izmjenične struje 50/60Hz
Izlazna struja 34.8A 43.5A 52.2A
Podesivi faktor snage 0.8 vodi…0.8 zaostaje
THDi < 5%
Maks. učinkovitost pretvorbe (PV/AC) 96.5%
Europska učinkovitost @ vnominal (PV/AC) 95.5%
Podaci o bateriji (DC)
Nominalni DC voltage 48 V
Maksimalna struja punjenja i pražnjenja 190A/200A 220A/240A 250A/280A
Vrsta baterije Litij/olovna kiselina
Rezervno napajanje (AC)
AC nazivna izlazna snaga 8000 W 10000 W 12000 W
Nazivni AC izlaz voltage 230 V
Nazivna AC izlazna frekvencija 50/60Hz
Vrijeme promjene <20ms@Single
<30ms@Paralle
Učinkovitost
Vrhunska učinkovitost 96.5%
Europska učinkovitost 95.5%
Opći podaci
Dimenzije (Š/V/D) 550/465/150 mm
Težina 21.5 kg
Raspon radne temperature –10°C ... +50°C
Emisija buke (tipična) 75 dB
Samopotrošnja < 75W
Topologija Bez transformatora
Hlađenje DC ventilator
Stupanj zaštite IP20
Relativna vlažnost zraka 5%~95% bez kondenzacije
Nadmorska visina < 2000m
Komunikacija Wi-Fi/4G
Growatt SPE ES product features and specifications overview
Figure 7: Product features and specifications overview.

7. Savjeti za korisnike

  • Profesionalna instalacija: Always ensure that the inverter is installed by a certified professional to guarantee safety and compliance with electrical standards.
  • Ventilacija je ključna: Proper airflow around the inverter is crucial for preventing overheating and ensuring long-term performance. Regularly check that vents are clear.
  • Redovito pratite: Utilize the Growatt monitoring app or web platform to keep track of your system's performance, battery status, and energy production. This helps in early detection of any issues.
  • Kompatibilnost baterije: Ensure that any connected batteries (Lithium or Lead-acid) are compatible with the inverter's specifications for optimal charging and discharging.
  • Paralelni rad: If expanding your system with parallel inverters, ensure correct current sharing and communication connections as per the system architecture.

8. Jamstvo i podrška

For technical support, warranty claims, or any inquiries regarding your Growatt SPE ES Hybrid Solar Inverter, please use the contact information below. It is recommended to have your product model and serial number ready when contacting support.

  • WhatsApp: +86 18473951878
  • Email: 17680775530@163.com
Contact information for support including WhatsApp, phone, and email.
Figure 8: Contact Information.

Povezani dokumenti - SPE 8000 ES, SPE 10000 ES, SPE 12000 ES

prijeview Growatt katalog solarnih invertera i sustava za pohranu energije
Sveobuhvatan katalog Growatt solarnih invertera, uključujući jednofazne, trofazne i proizvode za pohranu energije, zajedno s nadzornim sustavima i studijama slučaja projekata. Sadrži detaljne specifikacije, prednosti i tehničke podatke za stambene i komercijalne primjene.
prijeview GROWATT SPE 12000/10000/8000 ES 系列 光伏混网逆变器 产品说明书
Ovaj priručnik pruža smjernice za instalaciju, rad i rješavanje problema za hibridne solarne invertere GROWATT SPE 12000 ES, SPE 10000 ES i SPE 8000 ES. Ovi svestrani uređaji integriraju MPPT regulatore punjenja, invertere s čistim sinusnim valom i UPS funkcionalnost za mrežno vezane, neovisne i rezervne primjene napajanja.
prijeview Growatt SPE 8000~12000 ES hibridni solarni inverter - tehnički podaci | Specifikacije i značajke
Tehnički list za hibridne solarne invertere serije Growatt SPE 8000~12000 ES. Detalji uključuju DC ulaz, AC izlaz, specifikacije baterije, ocjene učinkovitosti i opće podatke za modele SPE 8000 ES, SPE 10000 ES i SPE 12000 ES.
prijeview Growatt Off Grid MPV solarni inverter - korisnički priručnik (4KW-12KW)
Sveobuhvatni korisnički priručnik za seriju solarnih invertera Growatt Off Grid MPV (4KW-12KW). Obuhvaća instalaciju, rad, sigurnost, rješavanje problema, postavke LCD-a i tehničke specifikacije za modele poput SPF 4000T DVM-MPV.
prijeview Growatt SPE 8000-12000 ES serija - Vodič za solarni inverter
Sveobuhvatni korisnički priručnik za hibridne solarne invertere Growatt SPE 8000 ES, 10000 ES i 12000 ES. Obuhvaća instalaciju, rad, sigurnost, rješavanje problema i tehničke specifikacije.
prijeview Growatt SPE 8000-12000 ES PV hibridni inverter - korisnički priručnik
Sveobuhvatni korisnički priručnik za seriju hibridnih fotonaponskih pretvarača Growatt SPE 8000-12000 ES, s detaljnim opisom instalacije, rada, specifikacija i rješavanja problema za mrežno povezane i neovisne sustave za pohranu energije.