Home › APPs › Apps Magic Lantern APP User Manual

Apps Magic Lantern APP Korisnički priručnik

Aplikacije Magic Lantern APP

Nadview

Magic Lantern je mobilna aplikacija koja kontrolira LED lamp pojas preko apple ili Android mobitela.
Tradicionalni načini upravljanja kao što su infracrveni, 433MHz, 2.4GHz i drugi stari načini ožičenja bit će zamijenjeni načinom upravljanja mobilnim telefonom s praktičnim, moćnim i skalabilnim značajkama.
Putem mobilne aplikacije možete jednostavno i brzo kontrolirati boju, svjetlinu i temperaturu boje LED svjetlosnog pojasa. Također možete podesiti različite načine treptanja i pomicati LED svjetlosni pojas uz glazbeni ritam.
Samo držite LED svjetlosni pojas uključenim, uključite mobilni telefon Magic Lotus lamp inteligentni upravljački softver aplikacije, povežite jedan ili više kontrolera LED svjetlosnog pojasa putem Bluetootha, kako biste ostvarili različite postavke i
kontrola višestrukih LED svjetlosnih traka. Rad je vrlo jednostavan, jednostavan za učenje i korištenje.

Značajke

Podesite LED trake u boji sa 60,000 boja za promjenu boje i svjetline i prilagodite jednobojne LED trake za promjenu svjetline i temperature boje Reproducirajte mobilnu glazbu ili uključite uređaj za reprodukciju zvuka, možete dopustiti svjetlu da mijenja boju i svjetlinu s ritmom glazbe, prekrasan glazbeni ritam Unutar načina višestrukih postavki za promjenu boje i kontrolu LED traka bez mobitela

Kontrola na daljinu s višesmjernom antenom i načinom grupne kontrole više prema mnogo
Brzo i jednostavno automatsko povezivanje

Performanse
Magic Lantern APP ima dobru jednostavnost korištenja i kompatibilnost. Stvarno testiranje i provjera stotina mobilnih telefona kompatibilno je s trenutnim tržištem.
Većina pametnih telefona. APP je mali i praktičan, troši manje resursa sustava, pa su zahtjevi za mobilnu konfiguraciju niski. Kašnjenje kontrole je malo, rad je dobar, kontrola svjetla je glatka s vizualnim osjećajem ljudi.

Radno okruženje

Ovaj APP program zahtijeva telefone sa sustavom iznad Andriod 4.3 i iOS 8.0 Konfiguracija mobilnog telefona nije ograničena.

Upute

Napomena: Android verzija i iOS verzija preuzmite i koristite istu metodu, ovdje u verziji za Android kao example.

Preuzimanje APLIKACIJE

Skenirajte QR kod

iOS i Android sustavi mogu preuzeti aplikaciju ” Magic Lantern ” skeniranjem QR koda. Otvorite preglednik ili druge alate s funkcijom "Skeniraj QR kod", skenirajte QR kod "Čarobna svjetiljka" kao u nastavku:
Nakon što se softver instalira i uspješno preuzme, kliknite apk za instalaciju. Nakon dovršetka instalacije, na radnoj površini pojavit će se sljedeći stil ikone programa.

Rad aplikacija

Kliknite na ikonu Magic Lantern APP, uđite na stranicu APP:
Nakon ulaska u sučelje APP, ako Bluetooth nije omogućen, "Dopusti Magic Lantem na Bluetooth?" Kliknite [Dopusti]
prebacite se na sučelje boje i svjetline:
kliknite za prikaz lamp popis, view lamp popis:
Kliknite za ručno podešavanje RGB-a view:
prijeđite na sučelje načina rada:
prebacite se na sučelje glazbenog ritma:
Prijeđite na sučelje ritma mikrofona:
Prijeđite na vremensko sučelje:
Prebacite se na sučelje modificiranja slijeda pinova:

IZJAVA FCC-a

Ovaj uređaj sukladan je s dijelom 15 FCC pravila. Rad podliježe sljedeća dva uvjeta: (1) ovaj uređaj ne smije uzrokovati štetne smetnje i (2) ovaj uređaj mora prihvatiti sve primljene smetnje, uključujući smetnje koje mogu uzrokovati neželjeni rad
BILJEŠKA: Ova je oprema testirana i utvrđeno je da je u skladu s ograničenjima za digitalne uređaje klase B, u skladu s dijelom 15 FCC pravila. Ova su ograničenja osmišljena kako bi pružila razumnu zaštitu od štetnih smetnji u stambenim instalacijama. Ova oprema generira, koristi i može zračiti radiofrekventnu energiju i, ako se ne instalira i koristi u skladu s uputama, može uzrokovati štetne smetnje radijskim komunikacijama. Međutim, nema jamstva da se smetnje neće pojaviti u određenoj instalaciji. Ako ova oprema uzrokuje štetne smetnje radijskom ili televizijskom prijemu, što se može utvrditi uključivanjem i isključivanjem opreme, korisnik se potiče da pokuša ispraviti smetnje jednom ili više sljedećih mjera:

Preusmjerite ili premjestite prijemnu antenu.
Povećajte razmak između opreme i prijemnika.
Spojite opremu u utičnicu na strujnom krugu različitom od onog na koji je spojen prijemnik.
Obratite se prodavaču ili iskusnom radio/TV tehničaru za pomoć.
Upozorenje: promjene ili modifikacije koje nije izričito odobrila strana odgovorna za sukladnost mogu poništiti korisnikovo ovlaštenje za rukovanje opremom

Dokumenti / Resursi

	APLIKACIJA Čarobna svjetiljka User Manual · SNT-FS-12-01, SNTFS1201, 2A6NA-SNT-FS-12-01, 2A6NASNTFS1201, Magic Lantern APP, APP
	Magic Lantern App User Guide · 4FT, 2A8BS-4FT, 2A8BS4FT, Magic Lantern, App, Magic Lantern App
	Magic Lantern App User Manual · 2A9BQ-D50, 2A9BQD50, d50, Magic Lantern, App, Magic Lantern App
	APLIKACIJA Čarobna svjetiljka Instruction Manual · Magic Lantern APP, Lantern APP, APP
	Magic Lantern App User Guide · Magic Lantern App, App

Reference

korisnički priručnikmanual.tools

Published: April 30, 2022

Pitanja i odgovori

Helpful product questions tied to this manual. Each item links to the full Q&A page.

Pitanja i odgovori

Use this section to ask about setup, compatibility, troubleshooting, or anything missing from this manual.

Daniela Moisii kaže:

16. rujna 2022. u 6:26
Hello, I just bought the lamp in the double pack, I started it and tried a few colour combination. I left it then on white ( by the way, it’s quite pale, you can’t read with it), it worked a while, now it only blinks , no matter what I do, even if it’s disconnected from the power. What to do ?
Daniela Moisii asks Hello, I just bought the lamp in the double pack, I started it and tried a few colour combination. I left it then on white ( by the way, it's quite pale, you can't read with it), it worked a while, now it only blinks , no matter what I do, even if it's disconnected from the power. What to do ?

Manuals+ clarified question

Pitanje

Why is my Magic Lantern lamp blinking and how can I fix it?
Odgovor

Based on the Magic Lantern APP manual and common troubleshooting for these LED controllers, here are the steps to address the blinking issue:

Check the Mode: Lamp may have been set to a "Flash" or "Jump" mode within the app. Open the Magic Lantern app, go to the Stil or Način rada interface (as shown in section 3.2, step 6), and select a static color or "Auto Play" to see if the blinking stops.

Ciklus snage: Since you mentioned it blinks even when disconnected, it is likely that residual power in the capacitors or the controller's memory is maintaining the last state. Unplug the lamp from the power source for at least 30 seconds before plugging it back in.

Provjerite vezu: Ensure the LED strip is securely connected to the controller. A loose connection can sometimes cause flickering or blinking.

App Reset: Open the app, go to the Lamp Popis (section 3.2, step 4), and ensure the device is properly connected via Bluetooth. You can try deleting the device from the list and letting the app auto-search to reconnect it.

Svjetlina i boja: You noted the white light is pale; this is common for RGB strips that create white by mixing colors. In the prilagoditi interface, ensure the brightness slider is set to maximum.

Ako je lamp continues to blink rapidly while disconnected from power, there may be a hardware defect in the controller or power adapter of your specific double pack unit.
Read the full Q&A page
Odgovor
Anonimno kaže:

23. listopada 2022. u 2:15
magic lantern not appear my blotooth .how can i do?
Anonymous asks magic lantern not appear my blotooth .how can i do?

Manuals+ clarified question

Pitanje

Why is the Magic Lantern device not appearing in my Bluetooth list?
Odgovor

If your Magic Lantern device is not appearing in your Bluetooth list, please follow these troubleshooting steps based on the user manual:

Enable App Permissions: When you first open the Magic Lantern app, it will ask "Allow Magic Lantern to Bluetooth?". You must click [Dopusti] for the app to function and find your devices.

Provjerite snagu: Ensure the LED light band is powered on. The app requires the controller to be active to establish a connection.

Use the App's Search: Instead of looking in your phone's system Bluetooth settings, open the Magic Lantern app and click the lamp ikona popisa (usually three horizontal lines or a list icon in the top left). The app is designed to perform a "Bluetooth auto connect after search for devices" within its own interface.

Zahtjevi sustava: Verify your phone meets the minimum requirements: Android 4.3 or higher, or iOS 8.0 or higher.

Blizina: Ensure you are within range of the controller's antenna for the initial pairing.
Read the full Q&A page
Odgovor
Richarde kaže:

9. studenog 2022. u 12:21 ujutro
Why no RWB combinations? C’mon man!
Richard asks Why no RWB combinations? C'mon man!

Manuals+ clarified question

Pitanje

Why are there no Red-White-Blue (RWB) color combinations available in the Magic Lantern app?
Odgovor

The Magic Lantern app provides several ways to customize colors if a specific preset like RWB is not immediately visible in the standard list. Based on the manual, you can try the following to achieve your desired combination:

Modify Pin Sequence: Go to the "Modify Pin Sequence" interface (Step 10 in the manual). This allows you to manually set and reorder the crvena, zelena, i Plava light outputs.

Manual RGB Adjustment: Use the "RGB manual adjustment view" (Step 5) to precisely input color values. While the app supports 60,000 colors, specific multi-color patterns are often found under the Stil or Način rada sučelje.

Pattern Classification: In the Mode interface (Step 6), you can slide up and down through various categories like "Basic," "Curtain," and "Trans" to find multi-color flashing sequences.

If a dedicated RWB "patriotic" mode is missing from the preset list, it may be a limitation of the current software version, but you can often simulate it using the manual RGB settings or by cycling through the available multi-color jump/flash modes.
Read the full Q&A page
Odgovor
William Cahill kaže:

3. srpnja 2023. u 12:03
is there anyway to get the lights to flash red white and blue
William Cahill asks is there anyway to get the lights to flash red white and blue

Manuals+ clarified question

Pitanje

How can I set the lights to flash red, white, and blue using the Magic Lantern app?
Odgovor

To set specific flashing patterns in the Magic Lantern app, follow these steps:

Open the Mode Interface: Dodirnite Stil icon (represented by a grid or four-square icon) at the bottom of the app screen.

Select a Pattern: u Stil menu, you can slide up and down through the list of pre-programmed modes. Look for modes labeled with "RGB" or "7-Color" such as "7-Color Jump" or "7-Color Gradient."

Ručno podešavanje: If a specific red, white, and blue preset is not listed, you can use the prilagoditi tab to manually select colors. However, the app primarily uses pre-defined patterns for flashing sequences.

Kontrola brzine: Once you select a flashing mode, use the Ubrzati slider at the bottom of the interface to adjust how fast the colors change.

If your light set came with the LED2022-24KLJUČ remote control, you can also try pressing the BLJESAK or GLATKO, NESMETANO buttons to cycle through preset color sequences, though the app provides more granular control over the 60,000 available colors.
Read the full Q&A page
Odgovor
Andrew Lapiska kaže:

17. travnja 2024. u 3:38
I broke my remote for my magic lantern lite device I have the magic lantern app on my tablet can I use it to turn the lite on and off
Andrew Lapiska asks I broke my remote for my magic lantern lite device I have the magic lantern app on my tablet can I use it to turn the lite on and off

Manuals+ clarified question

Pitanje

Can I use the Magic Lantern app to turn my Magic Lantern Lite device on and off if my remote is broken?
Odgovor

Da, možete koristiti Magic Lantern app on your tablet to turn your device on and off. The app is designed specifically to replace traditional control methods like infrared remotes.

To control your device using the app, follow these steps:

Preuzmite i instalirajte: Ensure you have the "Magic Lantern" app installed on your tablet (available for Android 4.3+ and iOS 8.0+).

Omogući Bluetooth: Open the app and click [Dopusti] when prompted to enable Bluetooth.

Poveži: Keep your light device powered on. The app should automatically search for and connect to your LED controller via Bluetooth. You can view the connection status by clicking the Lamp Popis icon (the list icon in the top left).

Kontrola snage: Nakon povezivanja idite na Color and Brightness interface. You will find a Lamp gumb prekidača (a toggle switch icon) in the top right corner of the screen. Tapping this will turn your light on or off.

Additionally, the app allows you to set Vrijeme schedules to automatically turn the lights on or off at specific times, which can be found in the "Schedule" tab at the bottom of the interface.
Read the full Q&A page
Odgovor