1. Sigurnosne informacije
Always observe basic safety precautions when operating power tools to reduce the risk of fire, electric shock, and serious personal injury. Read and understand all instructions before operating this machine.
Opća sigurnosna pravila
- Nosite odgovarajuću osobnu zaštitnu opremu (OZO): Always wear safety glasses or goggles, hearing protection, and a dust mask. Heavy-duty gloves are recommended.
- Održavajte radno područje čistim i dobro osvijetljenim: Neuredna ili tamna područja izazivaju nezgode.
- Ne raditi u eksplozivnim atmosferama: Do not use power tools in the presence of flammable liquids, gases, or dust. Power tools create sparks which may ignite the dust or fumes.
- Držite djecu i promatrače podalje: Smetnje mogu uzrokovati gubitak kontrole.
- Osigurajte radni komad: Uvijek klamp the material firmly before cutting.
- Avoid awkward body positions: Održavajte pravilan položaj i ravnotežu u svakom trenutku.
- Isključite napajanje: Always disconnect the machine from the power source before making adjustments, changing accessories, or performing maintenance.
Specific Cut-Off Machine Safety
- Use correct abrasive wheels: Only use 14-inch abrasive cut-off wheels rated for the machine's RPM.
- Inspect wheel before use: Do not use cracked, chipped, or damaged wheels.
- Ensure wheel guard is in place: Never operate the machine without the wheel guard properly installed and functioning.
- Be aware of sparks and debris: Cutting operations produce sparks and hot debris. Clear the area of flammable materials and ensure bystanders are at a safe distance.
- Allow wheel to reach full speed: Before beginning a cut, allow the abrasive wheel to reach its full operating speed.
2. Proizvod je gotovview
The Milwaukee 6175-8 is a 14-inch abrasive cut-off machine designed for efficient and portable cutting of various metal materials. It features a powerful 15 amp motor, a durable cast-iron base, and a spindle lock for convenient blade changes. The pivoting wheel guard enhances safety during operation.
Ključne značajke
- Snažan 15 amp motor for demanding cutting tasks.
- Robust cast iron base for stability and durability.
- Spindle lock mechanism for quick and easy abrasive wheel changes.
- Pivoting wheel guard for enhanced user protection.
- Integrated one-piece carrying handle for portability.
- Quick-release locking vise for secure material clamping and angle cutting up to 45 degrees.
Image 2.1: The Milwaukee 6175-8 14-Inch Abrasive Cut-Off Machine. This image shows the overall design of the machine, including the motor housing, cutting arm, base, and vise assembly.
3. Postavljanje
Raspakiranje i pregled
- Pažljivo izvadite stroj i sav pribor iz ambalaže.
- Inspect the machine for any damage that may have occurred during shipping. If any damage is found, do not operate the machine and contact customer service.
- Verify that all components listed in the packing list are present: cut-off machine, vise, abrasive wheel, and hex wrench.
Priprema radnog područja
- Place the machine on a stable, level surface capable of supporting its weight and the workpiece.
- Osigurajte dovoljan prostor oko stroja za siguran rad i rukovanje materijalom.
- Clear the area of any flammable materials due to sparks generated during cutting.
Abrasive Wheel Installation
- Provjerite je li stroj isključen iz izvora napajanja.
- Pritisnite i držite tipku za zaključavanje vretena.
- Using the provided hex wrench, loosen and remove the arbor nut and outer flange.
- Place the new 14-inch abrasive wheel onto the arbor, ensuring it is seated correctly against the inner flange.
- Reinstall the outer flange and arbor nut. Tighten the arbor nut securely while holding the spindle lock button. Do not overtighten.
- Release the spindle lock button and manually rotate the wheel to ensure it spins freely and is properly aligned.
Vise Adjustment
- The quick-release vise allows for rapid clamping i unclampobradaka.
- To adjust for different material sizes, loosen the vise handle and slide the movable jaw to the desired position.
- For angle cuts, the vise can be pivoted up to 45 degrees. Loosen the appropriate bolts on the base, adjust the vise to the desired angle using the angle guide, and then securely tighten the bolts.
4. Upute za rad
Priključak za napajanje
- Connect the machine to a standard 120 Volts AC power outlet. Ensure the circuit can handle the 15 amp motor load.
Materijal Clamping
- Place the workpiece firmly against the fence and within the vise jaws.
- Tighten the quick-release vise handle to secure the material. Ensure the material is held firmly and will not shift during the cut.
- The machine can cut pipe up to 5" O.D., bar stock up to 3-5/8", and square stock up to 5".
Izrada rezanja
- Uvjerite se da je obradak sigurno clamped and the area is clear.
- Lower the cutting arm slightly to ensure the abrasive wheel clears the workpiece.
- Press the ON switch to start the motor. Allow the abrasive wheel to reach its full operating speed of 3900 RPM before beginning the cut.
- Slowly and steadily lower the cutting arm, allowing the abrasive wheel to cut through the material. Do not force the cut; let the wheel do the work.
- Once the cut is complete, release the ON switch and allow the wheel to stop rotating before raising the cutting arm.
- uklamp obradak i uklonite ga sa stroja.
5. Održavanje
Regular maintenance ensures the longevity and safe operation of your Milwaukee cut-off machine. Always disconnect the machine from the power source before performing any maintenance.
Čišćenje
- After each use, clean the machine to remove metal dust and debris. Use a brush or compressed air.
- Ne koristite otapala ili jake kemikalije koje bi mogle oštetiti plastične dijelove.
- Održavajte ventilacijske otvore čistima kako biste spriječili pregrijavanje motora.
Abrasive Wheel Replacement
- Replace abrasive wheels when they become worn down, chipped, or damaged. Refer to the "Abrasive Wheel Installation" section for detailed steps.
Opća inspekcija
- Povremeno provjeravajte je li kabel za napajanje oštećen. Ako je oštećen, neka ga zamijeni kvalificirani serviser.
- Check all nuts, bolts, and screws for tightness. Tighten as necessary.
- Ensure the wheel guard operates freely and returns to its protective position.
- Inspect the vise mechanism for smooth operation and secure clamping.
6. Rješavanje problema
Ovaj odjeljak obrađuje uobičajene probleme s kojima se možete susresti pri radu s reznim strojem.
| Problem | Mogući uzrok | Otopina |
|---|---|---|
| Stroj se ne pokreće | Nema napajanja Neispravan kabel za napajanje Motor overload protection tripped | Provjerite utičnicu i osigurač Pregledajte kabel na oštećenja; zamijenite ga ako je potrebno Allow motor to cool; reduce load |
| Excessive sparks or smoke during cutting | Dull or incorrect abrasive wheel Forsiranje reza Improper material clamping | Replace with a new, sharp abrasive wheel Reduce feed pressure; allow wheel to cut at its own pace Osigurajte da je radni komad sigurno pričvršćenamped |
| Netočni rezovi | Loose workpiece Vise not set correctly Worn abrasive wheel | Sigurno clamp radni komad Check vise angle and tightness Replace the abrasive wheel |
| Stroj prekomjerno vibrira | Labave komponente Damaged or unbalanced abrasive wheel Unstable work surface | Provjerite i zategnite sve pričvršćivače Inspect and replace abrasive wheel if damaged Ensure machine is on a stable, level surface |
7. Specifikacije
Technical specifications for the Milwaukee 6175-8 14-Inch Abrasive Cut-Off Machine.
| Značajka | Specifikacija |
|---|---|
| Broj modela | 6175-8 |
| Motor Ampdoba | 15 Amps |
| Voltage | 120 V AC |
| O/min bez opterećenja | 3900 okretaja u minuti |
| Promjer oštrice | 14 inča |
| Veličina sjenice | 1 inča |
| Max Cutting Angle | 45 stupnja |
| Workpiece Capacity (Pipe O.D.) | 5 inča |
| Workpiece Capacity (Bar Stock) | 3-5/8 inča |
| Workpiece Capacity (Square Stock) | 5 inča |
| Težina artikla | 52.5 funti |
| Izvor napajanja | Električni na kabel |
| Posebna značajka | Blokada vretena |
| Usklađenost | OSHA |
8. Jamstvo i podrška
Informacije o jamstvu
This Milwaukee 6175-8 Abrasive Cut-Off Machine is a reconditioned product. Reconditioned Milwaukee Products are covered by a petogodišnje ograničeno jamstvo through the Milwaukee factory or an authorized service center. This warranty covers defects in material and workmanship. Please retain your proof of purchase for warranty claims.
Korisnička podrška
For technical assistance, service, or warranty inquiries, please contact Milwaukee customer support or an authorized Milwaukee service center. Contact information can typically be found on the official Milwaukee webstranici ili u dokumentaciji koju ste dobili uz kupnju.
