Uvod
This manual provides essential information for the proper use, installation, and maintenance of your Genuine Numatic RSV200 Vacuum 32MM Taper Hose/Tool Adapter. Please read this manual thoroughly before using the product to ensure optimal performance and longevity.
Image: The Genuine Numatic RSV200 Vacuum 32MM Taper Hose/Tool Adapter, a black cylindrical component designed for vacuum cleaner hose connections.
Proizvod gotovview
The Numatic 32MM Taper Hose/Tool Adapter (Part Number 601141) is a genuine accessory designed to provide a secure and efficient connection between your vacuum cleaner's hose and various cleaning tools. It is specifically engineered for Numatic appliances, ensuring compatibility and reliable performance.
Ključne karakteristike:
- Genuine Numatic part for assured compatibility and quality.
- Designed for 32mm taper hose connections.
- Ensures a secure fit between hose and vacuum tools.
- Izdržljiva konstrukcija za dugotrajnu upotrebu.
Postavljanje i instalacija
Follow these steps to correctly install the adapter:
- Identify Compatible Components: Ensure your vacuum hose has a 32mm taper and the tool you intend to connect is compatible with this adapter. This adapter is suitable for Numatic appliances.
- Spojite na crijevo: Insert the tapered end of the vacuum hose firmly into one end of the adapter. Apply gentle pressure and twist slightly until a snug fit is achieved.
- Poveži se s alatom: Insert the desired vacuum tool (e.g., brush, crevice tool) into the other end of the adapter. Push firmly until it is securely seated.
- Provjerite vezu: Gently pull on both the hose and the tool to ensure they are securely attached to the adapter and will not detach during use.
Upute za rad
Once the adapter is securely connected to both the vacuum hose and the desired tool, the vacuum cleaner can be operated as usual. The adapter facilitates the connection, allowing for efficient transfer of suction to the attached tool.
- Ensure all connections are tight before operating the vacuum.
- Do not force the adapter onto incompatible hoses or tools.
- Regularly check the adapter for any signs of wear or damage that might affect suction or connection integrity.
Održavanje
The Numatic 32MM Taper Hose/Tool Adapter requires minimal maintenance to ensure its longevity and proper function.
- Čišćenje: Wipe the adapter with a damp krpom za uklanjanje prašine i ostataka. Nemojte koristiti jake kemikalije ili abrazivna sredstva za čišćenje.
- Inspekcija: Periodically inspect the adapter for cracks, deformities, or any signs of wear that could compromise its sealing ability or structural integrity.
- Skladištenje: Store the adapter in a clean, dry place away from direct sunlight and extreme temperatures when not in use.
Rješavanje problema
| Problem | Mogući uzrok | Otopina |
|---|---|---|
| Loose connection / Air leak | Adapter not fully seated; incompatible hose/tool; damaged adapter. | Ensure adapter is pushed firmly onto both hose and tool. Verify compatibility. Inspect adapter for damage and replace if necessary. |
| Poteškoće s pričvršćivanjem | Incorrect size; debris in connection points. | Confirm hose/tool size is 32mm taper. Clean any debris from the adapter and connecting parts. |
Tehnički podaci
- Broj dijela: NUMATIC 601141
- Kompatibilnost: Numatic appliances, 32MM Taper Hoses
- Materijal: Izdržljiva plastika
- Težina artikla: 20 g
- Dimenzije paketa: 16 x 5.4 x 4.6 cm
Jamstvo i podrška
As a genuine Numatic product, this adapter is covered by the manufacturer's standard warranty. For specific warranty details or technical support, please refer to the official Numatic documentation or contact Numatic customer service directly.
Mjere opreza: Take safety precautions when repairing all appliances. Repairs to gas appliances should only be made by a Gas Safe Registered engineer. This product is an accessory for vacuum cleaners and does not involve gas appliances.
