Uline Comfort-Grip nož - upute za uporabu

Uvod

This manual provides essential instructions for the safe and effective use, maintenance, and troubleshooting of your Uline Comfort-Grip Knife. Please read this manual thoroughly before operating the knife and retain it for future reference.

Sigurnosne informacije

WARNING: Blades are extremely sharp. Handle with extreme care. Always retract the blade when not in use. Keep out of reach of children.

Always wear appropriate personal protective equipment, such as cut-resistant gloves and eye protection, when handling or replacing blades.

Komponente

The Uline Comfort-Grip Knife consists of the following main components:

Ručka: Ergonomski dizajniran za udoban hvat.
Blade Retraction Button: Koristi se za izvlačenje i uvlačenje oštrice.
Sječivo: Replaceable carbon steel utility blade.
Blade Release Mechanism: Allows for quick blade changes.

Uline Comfort-Grip Knife showing handle, blade, and retraction button — Slika 1: Gotovoview of the Uline Comfort-Grip Knife. This image displays the blue handle with the orange ULINE logo, the silver blade housing, and the exposed black utility blade. The blade retraction button is visible on top of the handle.

Postavljanje

Blade Installation (Initial Setup)

Your Uline Comfort-Grip Knife comes with one blade pre-installed or included separately. If the blade is not installed, follow these steps:

Locate the blade release mechanism, typically a button or lever near the front of the knife.
Press and hold the blade release mechanism.
Carefully insert a new utility blade into the blade slot until it clicks into place. Ensure the blade is oriented correctly with the sharp edge facing forward.
Release the blade release mechanism. Gently pull on the blade to ensure it is securely locked.

Bilješka: Always ensure the blade is fully seated and locked before use to prevent accidental dislodgement.

Upute za rad

Izvlačenje i uvlačenje oštrice

The Uline Comfort-Grip Knife features a retractable blade with three positions for versatility and safety.

To extend the blade, locate the textured thumb slide button on the top of the handle.
Push the thumb slide button forward until the blade extends to your desired cutting depth. The knife has three distinct blade positions.
To retract the blade, pull the thumb slide button backward until the blade is fully enclosed within the handle.

Važno: Always retract the blade fully when the knife is not in active use or when storing it.

Tehnike rezanja

Za optimalnu izvedbu i sigurnost:

Uvijek odrežite dalje od svog tijela.
Use a cutting mat or a sacrificial surface underneath the material being cut.
Apply firm, even pressure. Do not force the blade.
For thicker materials, make multiple shallow passes rather than one deep cut.

Održavanje

Zamjena oštrice

Dull blades are dangerous and can lead to accidents. Replace the blade as soon as it shows signs of dullness or damage.

Ensure the blade is fully retracted.
Locate and press the blade release mechanism.
Carefully slide the old blade out. Dispose of used blades safely in a designated blade disposal container or wrapped securely to prevent injury.
Insert a new Uline replacement blade (available separately) into the slot until it locks into place.
Release the blade release mechanism and verify the new blade is secure.

Čišćenje i skladištenje

Keep your knife clean and dry to ensure longevity and proper function.

Wipe the knife clean with a dry cloth after each use.
Do not immerse the knife in water or cleaning solutions.
Store the knife in a dry place with the blade fully retracted, away from moisture and extreme temperatures.

Rješavanje problema

Problem	Mogući uzrok	Otopina
Oštrica se ne izvlači ili ne uvlači glatko.	Debris in the blade channel; mechanism obstruction.	Clean the blade channel of any debris. Ensure the blade is not bent or damaged.
Oštrica je labava ili klimava.	Blade not fully seated; worn blade release mechanism.	Ensure the blade is correctly installed and locked. If the issue persists, the knife may need replacement.
Knife not cutting effectively.	Tupa ili oštećena oštrica.	Replace the blade with a new, sharp Uline replacement blade.

Tehnički podaci

Model: B004SIPL18
Marka: ULINE
Handle Dimensions (L x H x D): 6 x 1.3 x 0.8 inča
Blade Dimensions (L x H): 2.4 x 0.74 inča
Debljina oštrice: 0.6 mm
Materijal ručke: Zinc / Rubber
Materijal oštrice: Ugljični čelik
Vrsta ručke: Ručno uvlačivo
Težina artikla: 4.8 unci
Datum prve dostupnosti: 17. ožujka 2011

Informacije o jamstvu

ULINE products are manufactured to high-quality standards. For specific warranty details, please refer to the warranty information provided at the time of purchase or visit the official ULINE website. Typically, products are covered against defects in materials and workmanship under normal use.

Korisnička podrška

If you have any questions, require assistance, or need to order replacement parts (such as blades), please contact ULINE customer support:

Webstranica: www.uline.com
Telefon: Please refer to the ULINE webmjesto za regionalne kontakt brojeve.

When contacting support, please have your product model number (B004SIPL18) and purchase details ready.

	ULINE H-7162 24" LED svjetlo - Vodič za instalaciju, sigurnost i održavanje Ovaj vodič pruža bitne informacije za ULINE H-7162 LED svjetlo od 24 inča, uključujući sigurnosna upozorenja, upute za montažu, električne specifikacije i postupke održavanja. Osigurajte siguran i pravilan rad slijedeći ove smjernice.
	Upute za sastavljanje kolica za alat s 4 ladice ULINE H-8520 Sveobuhvatni vodič za sastavljanje ULINE H-8520 kolica za alat s 4 ladice, s detaljnim opisom dijelova, alata, sigurnosnih mjera opreza i detaljnim uputama za sastavljanje korak po korak.
	Sigurnosno-tehnički list za odmašćivanje ULINE Sveobuhvatni sigurnosno-tehnički list (SDS) za ULINE ODMAŠĆIVAČ, s detaljnim opisom opasnosti, sastava, mjera prve pomoći, rukovanja, skladištenja, kontrola izloženosti, fizikalnih i kemijskih svojstava, toksikoloških i ekoloških informacija, transporta i regulatornih podataka.
	ULINE H-8041 Kompaktni automatski čistač podova Upute za uporabu i vodič za rješavanje problema Sveobuhvatni korisnički priručnik za ULINE H-8041 kompaktni automatski čistač podova, koji obuhvaća sigurnost, sastavljanje, rad, svakodnevno održavanje i rješavanje problema za učinkovito čišćenje podova.
	ULINE H-2307 Dozator vlažnih maramica za teretanu: Vodič za ugradnju i korištenje Detaljan vodič za instalaciju i korištenje dozatora vlažnih maramica za teretanu ULINE H-2307. Naučite kako montirati, podesiti postavke i uložiti suhe brisače ili vlažne maramice za teretanu. Uključuje popis dijelova i potrebnog alata.
	ULINE H-7121, H-7122 Industrijski kolut za kabel - Priručnik za ugradnju i održavanje Ovaj priručnik pruža detaljne upute za instalaciju, rad i održavanje industrijskih kolutova za kabel ULINE H-7121 i H-7122. Uključuje sigurnosne mjere opreza, dimenzije, upute za montažu, smjernice za rješavanje problema i postupke za zamjenu ključnih komponenti poput izlaznog električnog kabela, ulaznog električnog kabela, držača/četkica i sklopa kolektora.

ULINE B004SIPL18