Taco 006-ST4

Taco 006-ST4 1/40 HP 115V Stainless Steel Circulator Pump Instruction Manual

1. Uvod i krajview

This manual provides essential information for the safe and efficient installation, operation, and maintenance of the Taco 006-ST4 1/40 HP 115V Stainless Steel Circulator Pump. The Taco 006-ST4 is designed for circulating water in various heating and cooling applications, particularly where corrosion resistance is critical. Its self-lubricating design enhances reliability by eliminating the need for a mechanical seal.

2. Sigurnosne informacije

WARNING: To reduce the risk of electric shock, always disconnect power to the unit before installation, servicing, or maintenance. Refer to the complete instruction manual for proper installation procedures. This equipment is for indoor use only and must be installed by a qualified professional. Not for use in swimming pool or marine areas.

  • Always ensure the power supply matches the pump's voltage zahtjevi (115V).
  • Do not operate the pump without water. Dry running can cause severe damage.
  • Provjerite jesu li svi vodovodni spojevi sigurni i ne propuštaju kako biste spriječili oštećenje vodom.
  • Nosite odgovarajuću osobnu zaštitnu opremu (OZO) tijekom instalacije i održavanja.
  • Observe all local codes and regulations for electrical and plumbing installations.

3. Značajke proizvoda

The Taco 006-ST4 Circulator Pump offers several key features:

  • Self-Lubricating Design: Eliminates the need for a mechanical seal, improving long-term reliability and reducing maintenance.
  • Konstrukcija od nehrđajućeg čelika: Provides excellent corrosion resistance, making it suitable for a wide range of water circulation applications.
  • Kompaktan dizajn: Facilitates installation in confined spaces.
  • Tihi rad: Engineered for minimal noise during operation.
  • Kontinuirana dužnost: Designed for reliable, continuous performance.

4. Postavljanje i instalacija

Proper installation is crucial for the optimal performance and longevity of your Taco 006-ST4 circulator pump. Always refer to the detailed installation instructions provided in the full product manual for specific guidance.

Opće smjernice za instalaciju:

  1. Montaža: The pump should be mounted securely in a horizontal position with the motor housing level. Ensure adequate clearance for wiring and future maintenance.
  2. Cijevi: Connect the pump to the system piping using appropriate fittings. Ensure that the system is clean and free of debris before connecting the pump.
  3. Električni priključci: All electrical wiring must be performed by a qualified electrician in accordance with local and national electrical codes. Ensure the power supply is disconnected before making any connections. The pump requires a 115V, 60Hz power supply.
  4. Punjenje sustava: After installation, fill the system with water and thoroughly purge all air to prevent dry running and cavitation.
Taco 006-ST4 Stainless Steel Circulator Pump with visible wiring compartment and specifications label

Slika 1: Prednja strana view of the Taco 006-ST4 Circulator Pump, showing the motor, pump housing, and electrical connection box. Key specifications like HP, Amps, Volts, Max Press, and Max Water Temp are visible on the label.

Taco 006-ST4 Circulator Pump with approximate dimensions labeled as 6 inches by 6 inches by 4 inches

Slika 2: Dimenzionalno view of the Taco 006-ST4 Circulator Pump, indicating approximate measurements of 6 inches in height, 6 inches in width, and 4 inches in depth for installation planning.

5. Upute za rad

Once properly installed and the system is filled and purged of air, the Taco 006-ST4 pump is designed for straightforward operation.

  1. Uključivanje: Restore electrical power to the pump. The pump will begin circulating water immediately.
  2. Nadzor sustava: Observe the system for proper flow and ensure there are no leaks. Listen for any unusual noises, which could indicate air in the system or an obstruction.
  3. Temperatura i tlak: Ensure the system's operating temperature and pressure remain within the pump's specified limits (Max Press: 125 PSI, Max Water Temp: 220 °F / 104 °C).

The pump is designed for continuous duty, meaning it can operate for extended periods without interruption.

6. Održavanje

The Taco 006-ST4 circulator pump features a self-lubricating design, which significantly reduces maintenance requirements. Regular inspection is generally sufficient to ensure continued reliable operation.

  • Godišnji pregled: Periodically inspect the pump for any signs of leaks, corrosion, or unusual wear.
  • Provjera buke: Listen for any changes in operating noise. Increased noise can indicate air in the system, cavitation, or potential motor issues.
  • Električni priključci: Osigurajte da svi električni spojevi ostanu čvrsti i bez korozije.
  • Čišćenje: Keep the exterior of the pump clean and free of dust or debris to ensure proper heat dissipation.

No user-serviceable parts are inside the sealed motor housing. For any internal issues, contact a qualified service technician.

7. Rješavanje problema

This section addresses common issues you might encounter with your circulator pump. For complex problems, consult a qualified professional.

ProblemMogući uzrokOtopina
Pumpa se ne pokreće ili ne radiNo power; tripped circuit breaker; faulty wiring; seized impellerCheck power supply and circuit breaker. Verify wiring connections. Consult a technician if impeller is seized.
Nema ili je nizak protokAir in system; closed valves; clogged impeller; incorrect pump sizePurge air from the system. Open all necessary valves. Inspect for clogs. Ensure pump is correctly sized for application.
Pretjerana buka ili vibracijaAir in system (cavitation); loose mounting; foreign object in pump; worn bearingsPurge air from system. Tighten mounting bolts. Disconnect power and inspect impeller for obstructions. Contact service for worn bearings.
Leaking from pumpLoose connections; damaged gaskets/O-rings; cracked housingTighten pipe connections. Replace damaged gaskets/O-rings. A cracked housing requires pump replacement.

8. Specifikacije

Detailed technical specifications for the Taco 006-ST4 Circulator Pump:

SpecifikacijaVrijednost
Broj modela006-ST4
Konjska snaga (KS)1 / 40 HP
Voltage115 V
Ampdoba0.52 Amps
Frekvencija60 Hz
RPM3250 okretaja u minuti
Maksimalni tlak125 PSI
Maksimalna temperatura vode220 °F (104 °C)
MaterijalNehrđajući čelik
Vrsta kućištaTip 2
KlasaKlasa H
Približne dimenzije (D x Š x V)6 cm x 6 cm x 4 cm
Težina artikla1 funta (16 unci)
Izvor napajanjaElektrični
Strana view of the Taco 006-ST4 Circulator Pump held in a hand for scale, showing a height of 5.7 inches or 14 cm

Slika 3: Bočni profesionalacfile of the Taco 006-ST4 Circulator Pump, illustrating its compact size with a height of approximately 5.7 inches (14 cm).

9. Jamstvo i podrška

Taco products are manufactured to high standards and typically come with a limited warranty. While specific warranty terms may vary, the Taco 006-ST4 is generally covered by a manufacturer's warranty, often for a period of three years from the date of purchase, covering defects in materials and workmanship.

For warranty claims, technical support, or service inquiries, please contact Taco customer service or your authorized dealer. Keep your proof of purchase and product model information readily available when contacting support.

Podaci za kontakt: Refer to the official Taco website or the documentation included with your product for the most current contact details.

Povezani dokumenti - 006-ST4

prijeview Taco 1911ecm ECM High-Efficiency Circulator Instruction Sheet
Instruction sheet for the Taco 1911ecm ECM High-Efficiency Circulator, covering installation, operation, controller functions, specifications, and troubleshooting. Learn about its features, safety guidelines, and maintenance.
prijeview Taco Plumb n' Plug "00" serija cirkulatora s patronama - Upute za uporabu
Comprehensive instructions for installing and operating Taco's Plumb n' Plug (PNP) "00" Series cartridge circulators. This guide details application, pump control options, benefits like water conservation and comfort, sizing guidelines, plumbing installation procedures, and programming instructions for both analog and digital timers. It also includes a limited warranty statement.
prijeview Upute za uporabu i vodič za ožičenje preklopnog releja Taco SR501-4
Detaljne upute za Taco SR501-4 preklopni relej, koje obuhvaćaju značajke, rad, dijagrame ožičenja, specifikacije, rješavanje problema i informacije o jamstvu za HVAC profesionalce.
prijeview Upute za visokoučinkovitu cirkulacijsku pumpu Taco 0026e ECM
Instruction sheet for the Taco 0026e ECM High-Efficiency Circulator, detailing its features, applications, installation, wiring, programming, and troubleshooting. This variable speed circulator offers significant energy savings and replaces older single and 3-speed models.
prijeview Taco Domestic Hot Water Recirculation Systems: Application, Selection & Installation Guide
A comprehensive guide to Taco's Domestic Hot Water Recirculation (DHWR) systems, detailing their application, selection process, and installation. Learn how to achieve instant hot water, conserve water and energy, and choose the right Taco product for residential use.
prijeview Upute za korištenje Taco SR506 preklopnog releja
Instruction sheet for the Taco SR506 Switching Relay, detailing wiring diagrams, operation, priority settings, jumper placement, power input, external diagnostics, and specifications for both Cold Start Boiler and Tankless Coil Boiler applications. Includes features and manufacturer information.