Omron G7SA-3A1B Slim sigurnosni relej s utičnicom 24 V DC Upute za uporabu

1. Uvod

This manual provides essential information for the safe and effective use of the Omron G7SA-3A1B Slim Plug-in Safety 24V-DC Relay. This device is designed for integration into safety circuits, providing reliable switching capabilities. Please read this manual thoroughly before installation and operation to ensure proper functionality and to prevent potential hazards.

2. Sigurnosne informacije

UPOZORENJE: Improper installation or operation can lead to serious injury or equipment damage. Always adhere to the following safety guidelines:

• Ensure all power is disconnected from the circuit before installing, inspecting, or performing maintenance on the relay.
• Installation and wiring must be performed by qualified personnel in accordance with all local and national electrical codes and regulations.
• Nemojte prekoračiti navedeni volumentage and current ratings of the relay.
• Prije uključivanja napajanja provjerite jesu li svi spojevi sigurni i ispravni.
• This relay is a component of a safety system. The overall safety of the system must be evaluated by a qualified safety engineer.

3. Značajke proizvoda

The Omron G7SA-3A1B Safety Relay offers the following key features:

• Ulazni voltage: 24 V-DC
• Tip: Sigurnosni relej
• Vrsta priključka: Plug-In for easy installation and replacement.
• Trenutna ocjena: 3 Amps
• Vrsta montaže: Nosač za utikač
• Način rada: Automatski
• Identifikator modela: D384849 (KFP)

4. Komponente prekoview

The Omron G7SA-3A1B relay is a compact, transparent-cased device designed for clear visual inspection of its internal components. It features a coil, contact sets, and multiple pins for electrical connection.

Slika 4.1: Ispred view of the Omron G7SA-3A1B Safety Relay. This image displays the transparent casing, revealing the internal coil, contact mechanisms, and the pin configuration for plug-in mounting. Markings for voltage and current ratings are visible on the casing.

Slika 4.2: Pod kutom view of the Omron G7SA-3A1B Safety Relay. This perspective highlights the slim profile of the relay and provides a clearer view of the connection pins at the bottom, essential for proper plug-in installation.

5. Postavljanje i instalacija

Follow these steps for proper installation of the G7SA-3A1B Safety Relay:

1. Prekid napajanja: Ensure all power to the control panel or circuit where the relay will be installed is completely disconnected and locked out.
2. Priprema utičnice: Identify the appropriate relay socket (sold separately) for the G7SA-3A1B. Ensure the socket is securely mounted and wired according to your circuit design and local electrical codes.
3. Relay Insertion: Align the pins of the G7SA-3A1B relay with the corresponding holes in the relay socket. Gently but firmly push the relay into the socket until it is fully seated. Do not force the relay, as this may bend or damage the pins.
4. Provjera veze: Visually inspect that all pins are correctly inserted into the socket and that the relay is seated flush.
5. Obnova napajanja: Nakon što je instalacija dovršena i provjerena, vratite napajanje u strujni krug.

6. Upute za rad

The Omron G7SA-3A1B is an automatic safety relay designed to operate based on the energization of its coil. When the 24V-DC coil is energized, the internal contacts will switch, typically closing normally open contacts and opening normally closed contacts. When the coil is de-energized, the contacts return to their default state.

• Energization: Apply 24V-DC to the coil terminals of the relay. The relay will actuate, changing the state of its contacts.
• De-energization: Remove the 24V-DC supply from the coil terminals. The relay will de-actuate, returning its contacts to their original state.
• Sigurnosna funkcija: In a safety circuit, the relay's contact state is used to control power to machinery or safety devices, ensuring that a safe condition is maintained or achieved upon activation or deactivation of the safety function.

7. Održavanje

The G7SA-3A1B Safety Relay is designed for long-term reliability with minimal maintenance. However, periodic inspection is recommended:

• Vizualni pregled: Regularly check the relay for any signs of physical damage, discoloration, or loose connections.
• Čišćenje: Ako je potrebno, nježno očistite vanjski dio releja suhom, mekom krpom. Nemojte koristiti otapala ili abrazivna sredstva za čišćenje.
• Funkcionalna provjera: Periodically verify the relay's switching function within the safety circuit as part of your system's preventative maintenance schedule.
• Zamjena: If the relay shows signs of wear, damage, or malfunction, replace it immediately with an identical Omron G7SA-3A1B model.

8. Rješavanje problema

If the G7SA-3A1B relay is not functioning as expected, consider the following:

• No Operation:
  • Check if the 24V-DC power supply to the coil is present and stable.
  • Verify all wiring connections to the relay socket are secure and correct.
  • Ensure the relay is fully seated in its socket.
• Povremeni rad:
  • Provjerite ima li labavih spojeva ili oštećenog ožičenja.
  • Provjerite voltage fluctuations in the 24V-DC supply.
• Contact Issues (e.g., contacts not switching):
  • Confirm the coil is receiving the correct 24V-DC voltage.
  • If the relay has been subjected to overcurrent or excessive switching cycles, internal contacts may be worn or damaged. Consider replacement.

If troubleshooting steps do not resolve the issue, contact Omron technical support or a qualified technician.

9. Specifikacije

10. Jamstvo i podrška

The Omron G7SA-3A1B Safety Relay is covered by Omron's standard product warranty. For specific warranty terms and conditions, please refer to the official Omron website or contact your local Omron representative.

For technical assistance, product inquiries, or support, please visit the official Omron website or contact Omron customer service directly. Contact information can typically be found on the Omron corporate webmjesto ili pakiranje proizvoda.