Waveshare 3.5-inch Resistive Touch Screen User Manual

Uvod

This manual provides detailed instructions for setting up, operating, and troubleshooting your Waveshare 3.5-inch Resistive Touch Screen. This display is designed for use with various Raspberry Pi models, offering a 480x320 resolution TFT LCD with resistive touch control.

Image: The Waveshare 3.5-inch Resistive Touch Screen, featuring a stylus for interaction, and displaying its key specifications like SPI interface and 480x320 resolution. This is a TFT LCD display.

Sadržaj paketa

Provjerite jesu li sve dolje navedene stavke uključene u vaš paket:

• Waveshare 3.5-inch RPi LCD (A)
• Olovka
• Mounting hardware (screws and standoffs)

Image: Contents of the product package, including the 3.5-inch LCD module, a light blue stylus, and a set of screws and brass standoffs for mounting.

Tehnički podaci

The display features a 480x320 hardware resolution and resistive touch control. It is designed to fit perfectly on compatible Raspberry Pi models.

Upute za postavljanje

Follow these steps to connect and configure your Waveshare 3.5-inch LCD with your Raspberry Pi.

1. Hardverska veza

1. Align the Display: Carefully align the 3.5-inch LCD module with the GPIO pins on your Raspberry Pi. Ensure the pins are correctly seated.
2. Osigurajte zaslon: Use the provided screws and standoffs to secure the display to the Raspberry Pi, if desired.

Image: The 3.5-inch LCD display module securely mounted on top of a Raspberry Pi board, connected via the GPIO header.

2. Konfiguracija softvera

The display requires specific drivers to function correctly. There are two primary methods for software setup:

Method A: Driver Installation on Existing OS

This method is suitable if you have an existing Raspbian, Ubuntu, or Kali operating system installed on your Raspberry Pi.

1. Preuzmite upravljačke programe: Obtain the latest drivers from the official Waveshare product page or wiki. Refer to the online user manual for specific download links.
2. Transfer Drivers: Transfer the downloaded driver package (e.g., LCD-show-YYMMDD.tar.gz) to your Raspberry Pi.
3. Instalirajte upravljačke programe: Open a terminal on your Raspberry Pi and execute the following commands:

   tar xvf LCD-show-YYMMDD.tar.gz
   cd LCD-show/
   ./LCD35-show

   Note: Replace LCD-show-YYMMDD.tar.gz with the actual filename of your downloaded driver package.
4. Ponovno pokretanje: After the installation script completes, the system will reboot. The display should now be active.

Važna razmatranja:

• Ensure your Raspberry Pi OS is updated before driver installation.
• For Raspberry Pi 5 and newer OS versions (e.g., Bookworm, Ubuntu 22.04+), driver compatibility may vary. Consult the Waveshare wiki for the most current information.
• If performing system updates (apt-get update, apt-get upgrade) after driver installation, it is recommended to hold the bootloader package to prevent display issues: sudo apt-mark hold raspberrypi-bootloader.

Method B: Using a Ready-to-Use Image

Waveshare provides pre-configured operating system images with the display drivers already installed. This is often the simplest method.

1. Download Image: Download the appropriate ready-to-use image file from the Waveshare website. These files are typically in .7z format and contain an .img file.
2. Extract Image: Ekstrakt .7z file za dobivanje .img file.
3. Write Image to SD Card: Use a disk imaging tool (e.g., Raspberry Pi Imager, Etcher) to write the .img file na microSD karticu.
4. Insert and Power On: Insert the prepared microSD card into your Raspberry Pi and power it on. The display should initialize automatically.

Image: The 3.5-inch LCD display showing a functional desktop environment, likely a Debian-based Raspberry Pi OS, demonstrating successful software configuration.

3. Napajanje

Preporuča se koristiti a 5V/3A strujni adapter for your Raspberry Pi when using this display. Using a power supply with insufficient current (e.g., from a PC's USB port) may lead to unstable operation or prevent the display from functioning correctly. For larger LCDs or complex setups, a standalone power adapter for the display might be required, though typically not for this 3.5-inch model.

Operacija

Kontrola na dodir

The Waveshare 3.5-inch LCD features a resistive touch screen. This type of touch screen responds to pressure, making it suitable for use with the included stylus or a fingernail. For optimal accuracy, use the stylus for precise interactions.

Display Orientation and Resolution

The display operates at a hardware resolution of 480x320 pixels. Depending on your software configuration, you may be able to adjust the software resolution or display orientation. The FBCP software driver allows for configuration of software resolution and dual-display setups.

Rješavanje problema

If you encounter issues with your Waveshare 3.5-inch LCD, refer to the following common problems and solutions:

Display Does Not Turn On or Stays White

• Check Hardware Connection: Ensure the display is correctly and firmly connected to the Raspberry Pi's GPIO pins. A loose connection can prevent the display from initializing.
• Provjerite napajanje: Confirm that your Raspberry Pi is powered by a stable 5V/3A power adapter. Insufficient power is a common cause of display issues. The PWR and ACT LEDs on the Raspberry Pi should indicate normal operation.
• Instalacija upravljačkog programa: Ensure the correct display drivers are installed for your specific Raspberry Pi model and operating system. If using a custom OS image, verify the drivers are compatible.
• SD Card Image Integrity: If using a pre-configured image, ensure it was written correctly to the microSD card. A corrupted image can lead to boot failures or display issues.

Touch Functionality Not Working

• Provjera vozača: Confirm that the touch screen drivers are correctly installed. Some driver packages might require separate installation steps for the display and touch functions.
• Kalibriranje: The touch screen may require calibration after driver installation. Refer to the Waveshare online wiki for calibration procedures specific to your OS.
• Greška hardvera: In rare cases, a hardware fault with the touch controller or display itself could be the cause.

Display Issues After OS Update

Operating system updates, especially kernel updates, can sometimes interfere with custom display drivers. If your display stops working after an update:

• Ponovno instaliranje upravljačkih programa: Attempt to reinstall the display drivers.
• Consult Waveshare Wiki: Check the official Waveshare wiki or support forums for updated drivers or specific instructions for your OS version.
• Bootloader Hold: As mentioned in the setup section, consider holding the Raspberry Pi bootloader package before updates to prevent conflicts.

For further assistance, please visit the official Waveshare webstranicu ili kontaktirajte njihovu tehničku podršku.

Održavanje

The Waveshare 3.5-inch LCD requires minimal maintenance. Follow these guidelines to ensure its longevity:

• Čišćenje: Gently wipe the screen surface with a soft, lint-free cloth. For stubborn smudges, slightly dampOperite krpu vodom ili sredstvom za čišćenje ekrana. Izbjegavajte abrazivne materijale ili jake kemikalije.
• Skladištenje: When not in use, store the display in a dry, dust-free environment. Keep it away from extreme temperatures and direct sunlight.
• Rukovanje: Avoid applying excessive pressure to the screen, especially with sharp objects, as this can damage the resistive touch layer.

Jamstvo i podrška

For information regarding product warranty, returns, or technical support, please refer to the official Waveshare website or contact your point of purchase. Waveshare provides online user manuals and support resources to assist with product usage and troubleshooting.

Službenik Webstranica: www.waveshare.com

Online korisnički priručnik: It is highly recommended to check the online user manual and product wiki on the Waveshare website for the most up-to-date drivers, tutorials, and troubleshooting guides, especially for newer Raspberry Pi models or operating system versions.