Uvod
This manual provides essential instructions for the setup, operation, and maintenance of your Datalogic Heron HD3130-BK 1D Barcode Scanner. Please read this manual thoroughly before using the device to ensure proper functionality and longevity.
Sadržaj paketa
- Datalogic Heron HD3130-BK 1D Barcode Scanner
- Stalak za skener
- (USB) Connection Cable (sold separately or included depending on package)
- Dokumentacija (ovaj priručnik)
Note: The connection cable is required for operation and may be sold separately.
Postavljanje
Follow these steps to set up your Datalogic Heron HD3130-BK barcode scanner:
- Raspakirajte skener: Carefully remove the scanner and its stand from the packaging.
- Sastavite postolje: If the stand is not pre-assembled, attach the scanner to the stand base according to the visual guide below. Ensure it is securely fastened.
- Spojite kabel: Insert one end of the USB connection cable into the port at the base of the scanner. Connect the other end of the USB cable to an available USB port on your computer (desktop or laptop).
- Uključivanje: The scanner is powered via the USB connection. Once connected, it should power on automatically.
- Instalacija upravljačkog programa (ako je potrebno): In most cases, the scanner will be recognized as a standard HID keyboard device and will not require specific driver installation. If prompted, follow your operating system's instructions for new hardware detection.
This image displays the Datalogic Heron HD3130-BK 1D Barcode Scanner in black, positioned on its included stand. The scanner features a sleek, ergonomic design, suitable for both handheld and presentation scanning.
Upute za rad
The Datalogic Heron HD3130-BK is designed for efficient 1D barcode scanning. It supports both handheld and presentation modes.
Ručno skeniranje
- Pick Up the Scanner: Remove the scanner from its stand.
- Aim and Scan: Point the scanner's window at the 1D barcode you wish to read. Ensure the red aiming line covers the entire barcode.
- Confirm Scan: A successful scan is typically indicated by an audible beep and/or a visual confirmation (e.g., a green light). The scanned data will be transmitted to your connected computer as keyboard input.
Presentation Scanning (using the stand)
- Mjesto stavke: Position the barcode of the item in front of the scanner's window while it is in its stand.
- Automatsko otkrivanje: The scanner will automatically detect and read the barcode when it is presented correctly within its field of view.
- Confirm Scan: A successful scan is indicated by an audible beep and/or visual confirmation.
The scanner is capable of processing approximately 270 scans per second, ensuring quick and efficient data capture.
Održavanje
Pravilno održavanje osigurava dugotrajnost i optimalne performanse vašeg skenera.
- Čišćenje: Koristite mekanu krpu koja ne ostavlja dlačice dampened with water or a mild, non-abrasive cleaner to wipe the scanner's exterior and scan window. Do not use harsh chemicals or abrasive materials.
- Skladištenje: Kada se ne koristi, skener čuvajte na čistom i suhom mjestu, dalje od izravne sunčeve svjetlosti i ekstremnih temperatura.
- Održavanje kabela: Avoid bending or twisting the USB cable excessively. Ensure it is not pinched or placed under heavy objects.
Rješavanje problema
If you encounter issues with your Datalogic Heron HD3130-BK scanner, refer to the following common problems and solutions:
| Problem | Mogući uzrok | Otopina |
|---|---|---|
| Skener se ne uključuje. | USB cable not connected or faulty. | Ensure the USB cable is securely connected to both the scanner and the computer. Try a different USB port or cable. |
| Skener ne čita barkodove. | Barcode damaged, incorrect aiming, or scanner settings. | Ensure the barcode is clean and undamaged. Aim the red line directly across the barcode. Check if the scanner is configured for the specific barcode symbology (e.g., UPC-A, Code 39). |
| Skenirani podaci se prikazuju netočno. | Keyboard layout mismatch or scanner configuration. | Verify your computer's keyboard layout matches the scanner's configured output. Refer to the full product manual for advanced configuration options. |
| Scanner beeps but no data is transmitted. | Application not in focus or incorrect interface mode. | Ensure the cursor is in the desired input field of your application. Confirm the scanner is operating in HID keyboard emulation mode. |
For more detailed troubleshooting or advanced configuration, please refer to the comprehensive Datalogic Heron HD3130 product manual available on the official Datalogic webmjesto.
Tehnički podaci
| Značajka | Detalj |
|---|---|
| Broj modela | HD3130-BK |
| Vrsta skenera | 1D skener crtičnog koda |
| Brzina skeniranja | 270 skeniranja/sekundi |
| Tehnologija povezivanja | USB kabel |
| Izvor napajanja | Električni s kabelom (putem USB-a) |
| Kompatibilni uređaji | Stolno računalo, Prijenosno računalo |
| Težina artikla | 1.28 funti (otprilike 0.58 kg) |
| Dimenzije proizvoda | 7.5 x 8.8 x 4.1 inča (otprilike 19.05 x 22.35 x 10.41 cm) |
| Proizvođač | Datalogic |
| Globalni trgovački identifikacijski broj (GTIN) | 05054629213858 |
Jamstvo i podrška
Datalogic products are designed for reliability and performance. For information regarding product warranty, please refer to the warranty statement included with your purchase or visit the official Datalogic webmjesto.
For technical support, service, or to inquire about additional accessories, please contact Datalogic customer support through their official channels. You may need your product model number (HD3130-BK) and serial number (if applicable) when contacting support.
Mrežni resursi: For the most up-to-date documentation, drivers, and software, please visit the Datalogic Official Webmjesto.
