Korisnički priručnik za ručni skener barkodova Datalogic QuickScan I QBT2131

1. Uvod

This manual provides comprehensive instructions for the setup, operation, and maintenance of your Datalogic QuickScan I QBT2131 Handheld Barcode Scanner. Please read this manual thoroughly before using the device to ensure proper functionality and to prevent damage.

2. Sadržaj paketa

Provjerite jesu li svi artikli prisutni u pakiranju vašeg proizvoda:

• Datalogic QuickScan I QBT2131 Handheld Barcode Scanner
• USB kabel
• Lithium-ion Battery (pre-installed or separate)
• Vodič za brzi početak (ako je primjenjivo)

Note: An AC adapter for charging may be sold separately.

3. Proizvod je gotovview

The Datalogic QuickScan I QBT2131 is a 1D linear imager barcode scanner designed for efficient data capture in retail and warehouse environments. It features Bluetooth wireless technology for flexible operation and a durable design.

Slika 1: Datalogic QuickScan I QBT2131 Handheld Barcode Scanner in its charging cradle. The scanner is dark gray with a blue trigger button, and the cradle is also dark gray with two indicator lights on its front panel.

Komponente:

• Scanner Head: Contains the imaging window and scanning engine.
• Gumb okidač: Aktivira snop za skeniranje.
• Ručka: Ergonomski rukohvat za udobnu upotrebu.
• Charging/Communication Base: Provides power and data connection.
• Svjetlosni indikatori: On the scanner and base, indicating status (e.g., battery, connection).

4. Postavljanje

4.1. Ugradnja i punjenje baterije

1. Instalirajte bateriju: If the battery is not pre-installed, open the battery compartment cover on the scanner handle and insert the Lithium-ion battery, ensuring correct polarity. Close the cover securely.
2. Početna naplata: Place the scanner into its charging base. Connect the USB cable to the charging base and then to a powered USB port on a computer or a compatible USB power adapter (sold separately). The charging indicator light on the base will illuminate, typically amber or red, during charging and turn green when fully charged. Allow approximately 4 hours for a full charge before first use.

4.2. Connecting the Base to a Host Device

The charging base serves as the communication interface for the scanner.

1. USB veza: Connect one end of the provided USB cable to the USB port on the charging base. Connect the other end of the USB cable to an available USB port on your computer or host system.
2. Instalacija upravljačkog programa: Your operating system should automatically detect and install the necessary drivers. If prompted, follow the on-screen instructions.

4.3. Pairing the Scanner via Bluetooth

The QBT2131 scanner uses Bluetooth to communicate wirelessly with its base or other Bluetooth-enabled host devices.

1. Uključivanje: Ensure the scanner is charged and powered on.
2. Uđite u način uparivanja: Refer to the Quick Start Guide or Datalogic's official documentation for the specific barcode sequence to put the scanner into Bluetooth pairing mode. This usually involves scanning a special "Pairing Mode" barcode.
3. Pair with Base: If pairing with its dedicated base, place the scanner into the base while it is in pairing mode. The scanner and base will automatically attempt to establish a connection.
4. Pair with Host (Direct): If pairing directly with a Bluetooth-enabled computer or mobile device, search for Bluetooth devices on your host. Select "Datalogic QBT2131" (or similar) from the list and follow any on-screen prompts to complete the pairing process.
5. Potvrda: A successful connection is typically indicated by a specific LED pattern or an audible beep from the scanner.

5. Upute za rad

5.1. Osnovno skeniranje

1. Cilj: Point the scanner's imaging window at the barcode you wish to scan.
2. Okidač: Press and hold the trigger button. A red aiming line will appear.
3. Skenirati: Position the aiming line across the entire barcode. Once successfully read, the scanner will emit an audible beep and/or the green "good read" LED will illuminate.
4. Izdanje: Otpustite okidač.

Ensure the barcode is clean and flat for optimal scanning performance.

5.2. Indicator Lights and Sounds

• Green LED (Scanner/Base): Good read, fully charged battery, or connected.
• Red/Amber LED (Scanner/Base): Charging, low battery, or error.
• Zvučni signali: Indicate successful reads, errors, or mode changes. Consult the full product reference guide for specific beep codes.

6. Održavanje

6.1. Čišćenje skenera

• Koristite meku, čistu krpu dampoprati vodom ili blagom, neabrazivnom otopinom za čišćenje.
• Gently wipe the scanner's exterior, especially the imaging window.
• Do not use harsh chemicals, abrasive cleaners, or immerse the device in liquid.

6.2. Briga o bateriji

• Redovito punite bateriju kako biste održali optimalnu učinkovitost.
• Izbjegavajte ekstremne temperature, koje mogu smanjiti vijek trajanja baterije.
• Ako se skener neće koristiti dulje vrijeme, pohranite ga djelomično napunjenog (oko 50%) na hladnom i suhom mjestu.

7. Rješavanje problema

If the problem persists, please contact Datalogic customer support.

8. Specifikacije

• Model: QBT2131-BK-BTK1
• Dimenzije: 1.61 x 3.58 x 6.42 inča
• Težina: 6.7 unci
• Povezivost: USB Cable, Bluetooth
• Imager Type: 1D Linearni Imager
• Baterija: 1 litij-ionska baterija (uključena)
• Kompatibilni uređaji: Stolno računalo, Prijenosno računalo
• Boja: Crna
• Proizvođač: Datalogic SpA

9. Informacije o jamstvu

Datalogic products are covered by a limited warranty. For detailed warranty terms and conditions, please refer to the warranty card included with your product or visit the official Datalogic webstranicu. Sačuvajte dokaz o kupnji za slučaj reklamacije.

10. Korisnička podrška

For technical assistance, product inquiries, or service, please contact Datalogic customer support through their official website or the contact information provided in your product documentation. You may also find additional resources, FAQs, and software downloads on the Datalogic support portal.