Uvod
This manual provides detailed instructions for the safe and efficient operation of your Pyle PDA35BT Mini Bluetooth Power Digital Class D Amplifier. This compact 2-channel stereo amplifier features Bluetooth connectivity, two auxiliary inputs, and a headphone output, making it suitable for various audio setups. Please read this manual thoroughly before use and retain it for future reference.
Sigurnosne upute
- Provjerite je li napajanje voltage odgovara zahtjevima navedenim na jedinici.
- Ne izlažite uređaj kiši, vlazi ili ekstremnim temperaturama.
- Izbjegavajte postavljanje uređaja u blizinu izvora topline ili na izravnu sunčevu svjetlost.
- Ne otvarajte ampspasilac casing. Za sve servisne radove obratite se kvalificiranom osoblju.
- Držite jedinicu dalje od djece.
- Isključite adapter za napajanje iz zidne utičnice ako uređaj nećete koristiti dulje vrijeme.
- Osigurajte odgovarajuću ventilaciju oko jedinice kako biste spriječili pregrijavanje.
Sadržaj paketa
Prilikom raspakiranja provjerite jesu li svi predmeti prisutni:
- Pyle PDA35BT Mini Bluetooth Power Amplifter
- Wall Power Adapter (24V DC, 4.5A)
- Bluetooth antena
- RCA (L/R) Audio Cable
- Banana Plugs (for speaker connection)
- 3.5mm (AUX) Input Cable
Figure 1: Pyle PDA35BT Amplifier and Accessories
This image displays the compact Pyle PDA35BT amplifier alongside its essential accessories, including the power adapter, detachable Bluetooth antenna, RCA audio cables, banana plugs for speaker wire termination, and a 3.5mm AUX input cable, illustrating a complete package for immediate setup.
Proizvod gotovview
Prednja ploča
Figure 2: Front and Rear Panel Diagram
This diagram provides a clear, numbered illustration of both the front and rear panels of the Pyle PDA35BT amplifier, highlighting all input, output, and control features for easy identification and setup.
- Indikator napajanja: Svijetli kada je jedinica uključena.
- BT indikator: Illuminates when Bluetooth is active and flashes during pairing.
- Birač ulaza: Toggle switch to select between Bluetooth (BT) and Line (AUX) input.
- Headphone Jack (1/4''): Connect headphones for private listening. Automatically mutes speaker output.
- Gumb za glasnoću/UKLJUČENO/ISKLJUČENO: Rotary control for adjusting master volume and powering the unit on/off.
- AUX-ULAZ (3.5 mm): Spojite vanjske audio uređaje putem 3.5 mm kabela.
Stražnja ploča
- BT ANT (Bluetooth Antenna): Za optimalni bežični domet spojite priloženu Bluetooth antenu.
- R OUT / L OUT (Speaker Outputs): Connect passive speakers using banana plugs. Supports 2-channel stereo output (50W x 2 @ 8 Ohm).
- LINE INPUT (RCA L/R): Spojite vanjske audio izvore pomoću RCA kabela.
- DC 24V (Power Input): Connect the included 24V DC power adapter.
Figure 3: Pyle PDA35BT Front and Rear Views
This image provides a clear visual of the Pyle PDA35BT amplifier from both the front and rear, detailing the layout of all control knobs, input jacks, output terminals, and the Bluetooth antenna connection point.
Postavljanje
- Spojite zvučnike:
Spojite svoje pasivne zvučnike na R VAN i L VAN terminals on the rear panel using banana plugs. Ensure correct polarity (red to red, black to black) for optimal sound quality. This amplifier is designed for bookshelf or small outdoor speakers, not large 10-12 inch speakers or subwoofers.
- Priključite Bluetooth antenu:
Screw the included Bluetooth antenna onto the BT ANT konektor na stražnjoj ploči.
- Connect Audio Source (Optional - Wired):
- For RCA input: Connect your audio device (e.g., CD player, TV) to the LINE INPUT (RCA L/R) on the rear panel using RCA cables.
- For 3.5mm AUX input: Connect your audio device (e.g., smartphone, tablet) to the AUX-IN (3.5 mm) priključak na prednjoj ploči pomoću 3.5 mm audio kabela.
- Priključite napajanje:
Connect the included 24V DC wall power adapter to the DC 24V input on the rear panel, then plug the adapter into a suitable wall outlet.
Upute za rad
- Uključivanje/isključivanje:
Zakrenite Volume/ON/OFF Knob clockwise to turn the unit on. The Indikator napajanja (1) will illuminate. Rotate counter-clockwise until it clicks to turn off.
- Bluetooth uparivanje:
- Osigurajte Birač ulaza (3) is set to BT. The BT indikator (2) will flash, indicating it's in pairing mode.
- On your device (smartphone, tablet, etc.), enable Bluetooth and search for "Pyle Audio" or "PDA35BT".
- Odaberite amplifier from the list to pair. Once connected, the BT indikator (2) will glow solid blue.
- The Bluetooth version is 4.0, offering a range of approximately 30 feet. If no device connects within a certain time, the amplifier may time out. Turn the unit off and on again to re-enter pairing mode.
- Using AUX Input:
- For 3.5mm AUX-IN (front panel): Connect your device and set the Birač ulaza (3) do LINIJA.
- For RCA LINE INPUT (rear panel): Connect your device and set the Birač ulaza (3) do LINIJA.
- Izlaz za slušalice:
Uključite slušalice u Headphone Jack (1/4'') (4) on the front panel. The speaker outputs will automatically mute when headphones are connected.
- Podešavanje glasnoće:
Koristite Volume/ON/OFF Knob (5) to adjust the overall output volume.
Rješavanje problema
| Problem | Mogući uzrok | Otopina |
|---|---|---|
| Nema struje | Power adapter not connected or faulty; unit not turned on. | Ensure power adapter is securely connected and plugged into a working outlet. Rotate the Volume/ON/OFF knob clockwise to turn on. |
| Nema zvuka iz zvučnika | Speakers not connected correctly; input selector incorrect; volume too low; headphones connected. | Check speaker wire connections and polarity. Verify Input Selector is set to the correct source. Increase volume. Disconnect headphones if speakers are desired. |
| Bluetooth se ne uparuje | Uređaj nije u načinu uparivanja; uređaj je predaleko; smetnje. | Ensure Input Selector is set to BT and BT Indicator is flashing. Move device closer to the amplifier (within 30ft). Turn amplifier off and on again to reset Bluetooth. |
| Izobličen zvuk | Volume too high; faulty cables; speaker impedance mismatch. | Reduce volume. Check and replace audio cables if necessary. Ensure speakers are compatible (8 Ohm recommended). |
Tehnički podaci
| Značajka | Specifikacija |
|---|---|
| Izlazna snaga | 100 Watts (RMS: 50 Watt x 2 @ 8 Ohm) |
| Broj kanala | 2 |
| Bluetooth verzija | 4.0 |
| Bluetooth domet | Cca. 30 stopa |
| Unosi | 3.5mm AUX-IN (Front), RCA (L/R) Line Input (Rear) |
| Izlazi | Banana Plugs (Speaker), 1/4'' Headphone Jack |
| Maksimalni opskrbni volumentage | 24 volti (DC) |
| Dimenzije predmeta (D x Š x V) | 4.9 cm x 3.6 cm x 1.9 cm |
| Težina artikla | 1.06 funti |
Održavanje
- Čistite uređaj mekom, suhom krpom. Nemojte koristiti tekuća sredstva za čišćenje ili aerosole.
- Keep the unit free from dust and debris to ensure proper ventilation.
- Pohranite ampčuvajte na hladnom i suhom mjestu kada se ne koristi.
Jamstvo i podrška
For warranty information or technical support, please refer to the documentation included with your purchase or visit the official Pyle webstranicu. Sačuvajte dokaz o kupnji za bilo kakve reklamacije u jamstvenom roku.
