DnevnikTag UTRIX-16 PDF Korisnički priručnik za logger temperature

1. Uvod

DnevnikTag UTRIX-16 is a high-performance, multi-use temperature data logger designed for reliable and accurate monitoring across a wide range of applications. This device records temperature data and generates comprehensive PDF reports without requiring special software or hardware. Its integrated USB connector allows for easy data transfer and configuration.

2. Sigurnosne informacije

• Do not expose the device to extreme physical shock or vibration.
• Avoid immersing the device in liquids.
• Do not attempt to open or modify the device, as this will void the warranty and may cause damage.
• Baterije odložite u skladu s lokalnim propisima.
• Ensure the USB connector is clean and dry before connecting to a computer.

3. Sadržaj paketa

Provjerite jesu li svi artikli prisutni u paketu:

• DnevnikTag UTRIX-16 PDF Temperature Data Logger
• Korisnički priručnik (ovaj dokument)

4. Uređaj prekoview

The UTRIX-16 features a compact design with clear indicators and control buttons.

Slika 1: Ispred view of the LogTag UTRIX-16 PDF Temperature Data Logger. This image displays the device's front panel, showing the "ALERT" and "OK" indicator lights, and the "STOP" and "START/Mark" buttons. The LogTag brand and "USB PDF TEMPERATURE RECORDER" text are visible, along with a serial number barcode.

• ALERT Indicator: Flashes when a pre-configured temperature alert threshold has been exceeded.
• OK Indicator: Flashes to confirm normal operation and within-range temperature readings.
• Gumb STOP: Press to stop the current logging session.
• START/Mark Button: Press to start a new logging session or to insert a mark into the data stream during logging.
• Integrated USB Connector: Located at the bottom, used for connecting to a computer for configuration and data download.

Slika 2: DnevnikTag UTRIX-16 with its integrated USB connector extended. This view highlights the USB-A plug, ready for connection to a computer's USB port, facilitating direct data transfer and device configuration.

5. Postavljanje

5.1 Početna konfiguracija

The UTRIX-16 is typically pre-configured for immediate use. However, for custom settings (e.g., logging interval, alert thresholds, start delay), you will need to use the LogTag Analyzer software. This software is available for download from the official LogTag webmjesto.

1. Download and install the LogTag Softver za analizu iz DnevnikTag Recorders Software.
2. Connect the UTRIX-16 to a USB port on your computer.


Slika 3: DnevnikTag UTRIX-16 data logger connected to a computer's USB port. This illustrates the direct connection method for data download and configuration, eliminating the need for a separate interface cradle.

3. DnevnikTag Analyzer software should automatically detect the connected device.
4. Follow the on-screen prompts within the software to configure logging parameters as needed.

5.2 Podaci o bateriji

The UTRIX-16 uses a CR2 battery (included). The battery is designed for long life and is generally not user-replaceable without specialized tools. If battery replacement is required, it is recommended to contact LogTag support or an authorized service center.

6. Operacija

6.1 Starting a Logging Session

To start a new logging session:

1. Ensure the device is not currently logging (check the OK/ALERT indicators).
2. Pritisnite i držite START/Oznaka button for approximately 5 seconds until the OK indicator flashes rapidly.
3. Release the button. The OK indicator will flash at regular intervals, indicating that logging has started.

6.2 Zaustavljanje sesije zapisivanja

To stop an active logging session:

1. Pritisnite i držite STOP button for approximately 5 seconds until the ALERT indicator flashes rapidly.
2. Release the button. The device will cease logging.

6.3 Marking Data

During an active logging session, you can insert a mark into the data stream:

• Kratko pritisnite tipku START/Oznaka button (less than 2 seconds).
• A mark will be recorded in the data, visible when the data is downloaded and analyzed.

7. Data Retrieval and Reporting

The UTRIX-16 generates a PDF report directly when connected to a computer.

1. Connect the UTRIX-16 to a USB port on your computer.
2. Uređaj će se pojaviti kao izmjenjivi pogon.
3. Locate and open the generated PDF report file. This report contains a summary of the logging session, temperature graphs, and statistical data.
4. For advanced analysis and configuration, use the LogTag Softver za analizator.

8. Održavanje

8.1 Čišćenje

Obrišite uređaj mekom krpomamp tkanina. Nemojte koristiti abrazivna sredstva za čišćenje ili otapala.

8.2 Zamjena baterije

The battery in the UTRIX-16 is designed for extended use and is not intended for user replacement. If the battery life is depleted, contact LogTag support for service options.

9. Rješavanje problema

10. Specifikacije

11. Jamstvo i podrška

DnevnikTag products are manufactured to high standards. For warranty information and technical support, please refer to the official LogTag webstranicu ili se obratite lokalnom distributeru. Sačuvajte račun kao dokaz o kupnji.

Official LogTag Webstranica: www.logtag-rekorderi.com