Renishaw OMP40-2 komplet mjernih glava za alatne strojeve Korisnički priručnik

1. Uvod

This manual provides essential information for the safe and effective use of the Renishaw OMP40-2 Machine Tool Probe Kit. The OMP40-2 is an ultra-compact 3D touch-trigger probe designed for precise workpiece set-up and inspection on small to medium machining centers, including those with high-speed capabilities and small HSK and spindle tapers.

Please read this manual thoroughly before installation, operation, or maintenance to ensure optimal performance and safety.

2. Ključne značajke

• Ultra-compact Design: Ideal for small to medium machining centers.
• 3D Touch-Trigger Technology: Provides accurate and repeatable measurements.
• Optical Signal Transmission: Ensures reliable data transfer in challenging environments.
• Svestrana primjena: Suitable for workpiece set-up, in-process measurement, and post-process inspection.
• Kompatibilnost: Designed for machines with small HSK and spindle tapers.

Slika 2.1: Prednja strana view of the Renishaw OMP40-2 probe, showing its compact design.

3. Sadržaj paketa

Upon opening the Renishaw OMP40-2 Machine Tool Probe Kit, verify that all components are present and undamaged. The standard kit typically includes:

• Renishaw OMP40-2 Probe Unit
• Kratki vodič / Korisnički priručnik
• Batteries (typically 2x 1/2 AA Lithium batteries)
• Associated documentation and accessories

Figure 3.1: The Renishaw OMP40-2 probe kit as packaged in its box, showing the probe, manual, and batteries.

Figure 3.2: Individual components of the OMP40-2 kit, including the probe, quick start guide, and batteries.

4. Postavljanje i instalacija

Proper installation is crucial for the accuracy and longevity of your OMP40-2 probe. Refer to the detailed installation guide provided with your kit for specific machine interface instructions.

4.1 Ugradnja baterije

1. Unscrew the battery cap on the probe unit.
2. Insert the two 1/2 AA Lithium batteries, ensuring correct polarity as indicated inside the compartment.
3. Securely fasten the battery cap.

Figure 4.1: The OMP40-2 probe and its batteries, ready for installation.

4.2 Probe Mounting

• Mount the OMP40-2 probe into the machine spindle using the appropriate tool holder.
• Ensure the probe is securely seated and aligned.
• Refer to your machine tool's manual for specific spindle mounting procedures.

4.3 System Pairing and Calibration

The OMP40-2 probe communicates optically with a receiver unit on the machine. Follow these general steps:

1. Power on the machine tool and the probe system receiver.
2. Initiate the pairing sequence as per the machine tool controller's instructions and the OMP40-2 quick start guide.
3. Perform a calibration routine using a known reference artifact (e.g., a calibration sphere) to establish probe offsets and ensure measurement accuracy.
4. Verify successful communication and calibration before proceeding with measurements.

5. Upute za rad

The Renishaw OMP40-2 probe is designed for automated measurement cycles. Operation is typically controlled via the machine tool's CNC program.

5.1 Workpiece Set-up

• Use the probe to accurately locate workpiece datums (e.g., edges, bores, surfaces) before machining operations.
• This allows for precise alignment of the workpiece with the machine's coordinate system, reducing manual setup time and errors.

5.2 In-Process Measurement

• Integrate probing cycles within machining programs to measure critical features during the manufacturing process.
• This enables adaptive machining, where subsequent operations can be adjusted based on real-time measurements, improving part quality and reducing scrap.

5.3 Post-Process Inspection

• After machining, use the probe to perform final inspection of part dimensions and geometry directly on the machine.
• This provides immediate feedback on part quality and can eliminate the need for separate inspection steps.

Bilješka: Always ensure the probe stylus is clean and undamaged before any measurement cycle. Refer to your machine tool's programming manual for specific G-code or macro instructions for probing cycles.

6. Održavanje

Regular maintenance ensures the accuracy and reliability of your Renishaw OMP40-2 probe.

6.1 Čišćenje

• Tijelo sonde: Wipe the probe body with a clean, soft cloth. Avoid using harsh chemicals or abrasive materials.
• Olovka: Gently clean the stylus tip with a lint-free cloth. Ensure no debris is present on the ruby ball.
• Optical Window: Keep the optical transmission window clean and free from coolant or debris to ensure reliable signal transmission.

6.2 Zamjena baterije

• Replace batteries promptly when the low battery indicator is observed (refer to your machine interface for indicator details).
• Always use recommended 1/2 AA Lithium batteries for optimal performance and battery life.
• Istrošene baterije odložite u skladu s lokalnim propisima.

6.3 Stylus Inspection and Replacement

• Periodically inspect the stylus for wear, damage, or signs of impact.
• A damaged stylus can significantly affect measurement accuracy and must be replaced immediately with a genuine Renishaw replacement stylus.
• After stylus replacement, always perform a full probe calibration.

7. Rješavanje problema

This section addresses common issues you might encounter with your OMP40-2 probe.

For issues not listed here, or if solutions do not resolve the problem, contact Renishaw technical support or your authorized distributor.

8. Tehničke specifikacije

The following specifications are typical for the Renishaw OMP40-2 probe. Refer to the official Renishaw datasheet for complete and up-to-date specifications.

• Model: OMP40-2
• Proizvođač: Renishaw
• Prijenos: Optički
• Vrsta sonde: 3D Touch-Trigger
• Primjena: Workpiece set-up and inspection on small to medium machining centers.
• Izvor napajanja: 2 x 1/2 AA Lithium batteries
• ASIN: B01HDWK3CM
• Datum prve dostupnosti: 21. lipnja 2016

9. Jamstvo i podrška

9.1 Informacije o jamstvu

The Renishaw OMP40-2 Machine Tool Probe Kit is typically sold with a manufacturer's warranty. For specific warranty terms and conditions, please refer to the documentation included with your product or contact Renishaw directly. Keep your proof of purchase for warranty claims.

9.2 Tehnička podrška

For technical assistance, service, or spare parts, please contact Renishaw customer support or your local authorized Renishaw distributor. Contact information can usually be found on the Renishaw official webmjestu ili pakiranju proizvoda.

Proizvođač: Renishaw

Webstranica: www.renishaw.com