Biral PrimAX 32-4 180 Heating Circulation Pump User Manual

1. Uvod

This manual provides essential information for the safe and efficient installation, operation, and maintenance of your Biral PrimAX 32-4 180 heating circulation pump. Please read this manual thoroughly before installation and operation. Keep it for future reference.

The Biral PrimAX 32-4 180 is a high-efficiency heating circulation pump designed for use in heating systems. It features a compact design and comes with a thermal insulation shell to minimize heat loss.

Image 1.1: Biral PrimAX 32-4 180 Heating Circulation Pump with its thermal insulation shell. The pump features a robust grey cast iron body and a black motor housing.

2. Sigurnosne informacije

UPOZORENJE: Nepoštivanje ovih sigurnosnih uputa može uzrokovati strujni udar, požar, teške ozljede ili smrt.

• Installation and maintenance must only be performed by qualified personnel in accordance with local regulations and standards.
• Before any work on the pump, ensure the power supply is disconnected and secured against accidental reconnection.
• Pumpa radi na električni pogontage (230V). Avoid contact with live parts.
• Ne koristite pumpu ako je oštećena ili ako je kabel za napajanje istrošen.
• Osigurajte ispravno uzemljenje crpke.
• Zaštitite pumpu od temperatura smrzavanja.
• Do not use the pump for pumping flammable or explosive liquids.

3. Sadržaj paketa

Carefully unpack the box and ensure all items are present and undamaged. If any items are missing or damaged, contact your supplier immediately.

• Biral PrimAX 32-4 180 Heating Circulation Pump
• Thermal Insulation Shell (pre-installed or separate)
• Upute za instalaciju i uporabu (ovaj priručnik)
• Connection accessories (gaskets, electrical connectors)

Image 3.1: Various connection accessories including electrical connectors and sealing gaskets, typically supplied with the pump for installation.

4. Postavljanje i instalacija

VAŽNO: Installation must be carried out by a qualified heating engineer or electrician.

1. priprema: Ensure the heating system is depressurized and drained. Close all necessary valves.
2. Položaj ugradnje: Install the pump in a horizontal pipe section with the motor shaft horizontal. Ensure sufficient space for maintenance and ventilation.
3. Priključak cijevi: Connect the pump to the heating pipes using appropriate fittings. Ensure gaskets are correctly seated to prevent leaks. The pump has a length of 180 mm.
4. Električni priključak: Connect the pump to a 230V, 50Hz power supply. Follow the wiring diagram provided with the pump and ensure proper grounding. Use the supplied electrical connectors.
5. Punjenje sustava: After installation, slowly refill the heating system, ensuring all air is vented from the pump and pipes.
6. Insulation Shell: If not pre-installed, attach the thermal insulation shell around the pump body to improve energy efficiency.

5. Upute za rad

The Biral PrimAX 32-4 180 pump features an intuitive control panel for adjusting its operating mode and performance.

Image 5.1: Close-up of the Biral PrimAX 32-4 180 control panel, showing buttons for adjustment, a digital display for power consumption (W), and indicators for operating modes and head (H) settings.

1. Uključivanje: Once the system is filled and vented, switch on the power supply to the pump. The display will illuminate.
2. Odabir načina rada: Use the mode button (often indicated by 'II▶') to cycle through available operating modes (e.g., constant pressure, proportional pressure, fixed speed). Refer to the pump's specific documentation for detailed mode descriptions.
3. Prilagodba performansi: Use the 'Up' (▲) and 'Down' (▼) buttons to adjust the pump's performance within the selected mode. The display may show the current power consumption in Watts (W) or the selected head setting (H).
4. Praćenje: The display provides real-time information on the pump's status and power consumption. Green indicators typically signify normal operation.

6. Održavanje

The Biral PrimAX 32-4 180 is designed for low maintenance. However, regular checks can ensure optimal performance and longevity.

• Godišnji pregled: Have a qualified technician inspect the pump annually for signs of wear, leaks, or unusual noises.
• Kvaliteta vode u sustavu: Ensure the heating system water quality is maintained according to manufacturer recommendations to prevent corrosion and scaling.
• Čišćenje: Keep the exterior of the pump and the insulation shell clean. Do not use abrasive cleaners.
• Ventilacija: Povremeno provjeravajte i odzračujte sustav grijanja kako biste uklonili sav zarobljeni zrak koji može utjecati na performanse pumpe i uzrokovati buku.

7. Rješavanje problema

Prije nego što kontaktirate podršku, ponovnoview sljedeći uobičajeni problemi i rješenja:

If the problem persists after attempting these solutions, please contact a qualified service technician or Biral customer support.

8. Specifikacije

9. Jamstvo i podrška

Biral products are manufactured to high-quality standards. For warranty information, please refer to the warranty card included with your product or visit the official Biral webstranicu. Sačuvajte dokaz o kupnji za slučaj reklamacije.

For technical support, spare parts, or service, please contact your local Biral dealer or authorized service center. You can find contact information on the official Biral webstranica: www.biral.ch