SIMPLEX 4903-9149 Zvučnik Strobe 110CD Upute za uporabu

1. Uvod

This manual provides essential information for the proper installation, operation, and maintenance of the SIMPLEX 4903-9149 Speaker Strobe. This device is designed for fire alarm and emergency signaling applications, combining an audible speaker with a visible 110 candela strobe light. Please read this manual thoroughly before proceeding with installation or use to ensure safety and optimal performance.

2. Važne sigurnosne informacije

Adherence to the following safety guidelines is crucial for preventing injury, property damage, and ensuring the correct function of the device. Installation and servicing must be performed by qualified personnel only.

• Potrebna profesionalna instalacija: This device must be installed by a certified fire alarm technician in accordance with all local and national electrical and fire codes.
• Izvor napajanja: Ensure the power source is disconnected before installation or maintenance to prevent electrical shock. The device operates on 24 Volts DC.
• Ožičenje: All wiring must comply with NFPA 70 (National Electrical Code) and NFPA 72 (National Fire Alarm and Signaling Code).
• Montaža: Securely mount the device to a stable surface as specified in the installation instructions.
• Testiranje: After installation, thoroughly test the device and the entire fire alarm system to confirm proper operation.

3. Proizvod je gotovview

The SIMPLEX 4903-9149 is a red, horizontal mount speaker strobe unit designed for clear audible and visible notification during emergency events. It features a speaker for voice messages or alarm tones and a high-intensity 110 candela strobe light for visual alerts.

Figure 1: SIMPLEX 4903-9149 Speaker Strobe unit.

Ključne karakteristike:

• Integrated speaker and 110 candela strobe.
• Horizontal mounting orientation.
• Red finish for clear identification as a fire safety device.
• Designed for 24VDC operation.

4. Instalacija i postavljanje

This section outlines the general steps for installing the SIMPLEX 4903-9149 Speaker Strobe. Refer to the detailed installation sheets provided with the product for specific wiring diagrams and mounting templates.

4.1 Montaža

1. Odaberite lokaciju: Choose a suitable wall-mount location that meets local code requirements for visibility and audibility.
2. Pripremite površinu za ugradnju: Ensure the mounting surface is clean, flat, and structurally sound to support the device.
3. Install Back Box: Install the appropriate electrical back box (not included) according to manufacturer instructions and local codes.
4. Montirani uređaj: Secure the speaker strobe unit to the back box using the provided hardware, ensuring a snug and stable fit. The device is designed for horizontal mounting.

4.2 Ožičenje

1. Odspojite napajanje: Before making any electrical connections, ensure that all power to the fire alarm control panel and associated circuits is disconnected.
2. Ožičenje rute: Route the necessary 24VDC power and audio signal wiring to the back box.
3. Spojite žice: Connect the field wiring to the terminal block on the speaker strobe unit according to the wiring diagram provided in the product's specific installation instructions. Pay close attention to polarity.
4. Provjerite veze: Double-check all wiring connections for correctness and secure termination.
5. Vrati snagu: Once all connections are verified and the device is securely mounted, restore power to the system.

5. Operacija

The SIMPLEX 4903-9149 Speaker Strobe operates in conjunction with a compatible fire alarm control panel (FACP). Upon receiving an alarm signal from the FACP, the device will activate its audible speaker and visible strobe light simultaneously.

• Funkcija zvučnika: The speaker will broadcast pre-recorded voice messages or alarm tones as programmed by the FACP.
• Stroboskopska funkcija: The 110 candela strobe light will flash at a specified rate, providing a clear visual alert, especially important for individuals with hearing impairments or in noisy environments.

The device will continue to operate until the alarm condition is cleared and the FACP is reset.

6. Održavanje

Regular maintenance ensures the continued reliability and performance of your SIMPLEX 4903-9149 Speaker Strobe. All maintenance should be performed by qualified personnel.

• Vizualni pregled: Periodically inspect the device for any signs of physical damage, discoloration, or obstruction of the speaker grille or strobe lens.
• Čišćenje: Gently clean the exterior of the device, especially the strobe lens, with a soft, damp cloth. Do not use abrasive cleaners or solvents. Ensure no moisture enters the device.
• Funkcionalno testiranje: Conduct periodic functional tests as required by local codes and NFPA 72. This typically involves activating the fire alarm system to verify that the speaker and strobe operate correctly.
• Ciklus snage: If the device appears to be malfunctioning, a power cycle (disconnecting and reconnecting power) may resolve minor issues. If problems persist, consult a qualified technician.

7. Rješavanje problema

If the SIMPLEX 4903-9149 Speaker Strobe is not functioning as expected, refer to the following troubleshooting guide. For complex issues, contact a qualified fire alarm technician.

8. Tehničke specifikacije

The following table provides key technical specifications for the SIMPLEX 4903-9149 Speaker Strobe.

9. Jamstvo i podrška

SIMPLEX products are manufactured to high-quality standards. For specific warranty information, please refer to the documentation provided with your purchase or contact your authorized SIMPLEX distributor. Any repairs or servicing must be performed by authorized personnel to maintain warranty validity.

For technical support, product inquiries, or to locate an authorized service provider, please contact your SIMPLEX supplier or visit the official SIMPLEX website. When contacting support, please have your product model number (4903-9149) and purchase details readily available.