1. Uvod
This manual provides essential information for the proper use, maintenance, and care of your Polar 115 Standard Cutting Sticks. These red cutting sticks are designed for use with Polar 115 cutting machines, ensuring precise and clean cuts. Each pack contains 12 cutting sticks, manufactured by PPE.
Ključne značajke uključuju:
- Specifically designed for Polar 115 cutting machines.
- Durable material for consistent cutting performance.
- Supplied in a convenient 12-pack.
2. Postavljanje i instalacija
Proper installation of the cutting stick is crucial for optimal performance and safety. Always refer to your Polar 115 cutting machine's specific user manual for detailed instructions on replacing cutting sticks.
- Sigurnost prije svega: Ensure the cutting machine is powered off and unplugged before attempting any installation or maintenance. Engage all safety locks.
- Remove Old Stick: Carefully remove the worn or damaged cutting stick from its designated slot in the machine. Dispose of old sticks responsibly.
- Clean Slot: Inspect and clean the cutting stick slot to remove any debris or residue that could interfere with the new stick's seating.
- Insert New Stick: Gently slide a new Polar 115 Standard Cutting Stick into the slot. Ensure it is fully seated and flush with the machine's surface. Do not force the stick into place.
- Provjerite sjedenje: Confirm the stick is securely in place and does not wobble. A properly seated stick prevents uneven cuts and premature wear.
Figure 2.1: A single Polar 115 Standard Cutting Stick, showing its rectangular profile and red color. This stick is designed to fit precisely into the cutting groove of compatible machines.
3. Upute za rad
The Polar 115 Standard Cutting Sticks are passive components that work in conjunction with your cutting machine's blade. Their primary function is to provide a soft, sacrificial surface for the blade to cut into, protecting the blade's edge and ensuring clean cuts.
- Redoviti pregled: Before each cutting session, visually inspect the cutting stick for any signs of wear, deep grooves, or damage.
- Optimalna izvedba: A fresh or minimally worn cutting stick contributes significantly to the longevity of your cutting blade and the quality of your cuts.
- Dubina oštrice: Ensure your cutting machine's blade depth is correctly calibrated so that it cuts just deep enough into the stick to sever the material, but not excessively deep, which would prematurely wear out the stick.
Slika 3.1: A view of multiple Polar 115 Standard Cutting Sticks, typically supplied in a pack of 12. These sticks are essential consumables for precision cutting operations.
4. Održavanje i njega
Proper maintenance extends the life of your cutting sticks and ensures consistent cutting quality.
- Rotacija: Many cutting machines allow for the rotation of the cutting stick to expose fresh surfaces. Rotate the stick periodically to utilize all four sides before replacement.
- Čišćenje: Periodically remove the cutting stick and wipe it clean with a dry cloth to remove paper dust or debris. Do not use abrasive cleaners.
- Skladištenje: Store unused cutting sticks in a cool, dry place, away from direct sunlight and extreme temperatures, to prevent material degradation. Keep them in their original packaging if possible.
- Zamjena: Replace the cutting stick when all usable surfaces are deeply grooved or when cuts become inconsistent or ragged.
5. Rješavanje problema
If you encounter issues with your cutting performance, consider the following troubleshooting steps related to the cutting stick:
| Problem | Mogući uzrok | Otopina |
|---|---|---|
| Ragged or uneven cuts | Worn or deeply grooved cutting stick. | Rotate the cutting stick to an unused side or replace it with a new one. |
| Blade dulls quickly | Cutting stick not properly seated or incorrect blade depth. | Ensure the stick is fully seated. Adjust blade depth according to your machine's manual. |
| Stick wears out too fast | Excessive blade depth or frequent cutting in the same spot. | Reduce blade depth if possible. Rotate the stick regularly. |
6. Specifikacije
- Naziv proizvoda: Polar 115 Standard Cutting Sticks
- Boja: crvena
- Količina: 12 štapića po pakiranju
- Marka: OZO
- Broj modela: EXC011601045
- Kompatibilnost: Designed for Polar 115 cutting machines
- ASIN: B01MSUQNRT
- Broj dijela proizvođača: EXC011601045
- Datum prve dostupnosti: 2. prosinca 2016
7. Jamstvo i podrška
For specific warranty information regarding your Polar 115 Standard Cutting Sticks, please refer to the packaging or contact the manufacturer, PPE, directly. As consumable items, cutting sticks typically have a limited or no direct warranty against wear and tear, but are covered against manufacturing defects.
For technical support or inquiries, please contact PPE customer service through their official website or the contact information provided with your purchase. Always provide your model number (EXC011601045) and purchase details when seeking support.
Note: This manual is for informational purposes only and does not replace the specific operating instructions provided with your cutting machine.
