Paradox 307-USB modul - korisnički priručnik

1. Uvod

The Paradox 307-USB Module is an essential interface designed for direct communication between your personal computer (PC) and Paradox security control panels. This module simplifies the process of programming, configuring, and managing your security system by providing a reliable USB connection.

It features a USB port and a serial port (DB-9), along with three LED indicators for PC, Central, and RX/TX status, offering clear visual feedback on the communication link.

Figure 1: The Paradox 307-USB Module, showing its compact design, USB and serial (DB-9) ports, and the integrated connection cable. This module facilitates direct data exchange between a computer and a Paradox security system panel.

2. Postavljanje i instalacija

Follow these steps to set up your Paradox 307-USB Module for the first time:

1. Povežite se s računalom: Plug the USB end of the 307-USB Module into an available USB port on your computer. The module is generally plug-and-play and often does not require specific driver installation, especially on modern operating systems like Windows 10.
2. Connect to Control Panel: Connect the serial (DB-9) port of the 307-USB Module to the corresponding serial communication port on your Paradox security control panel. Ensure a secure connection.
3. Instalacija softvera: Download and install the necessary Paradox programming software (e.g., WinLoad, BabyWare) from the official Paradox website. This software is crucial for configuring and managing your security system through the module.
4. Provjerite vezu: Once connected, observe the three LED indicators on the module:
   • PC LED: Indicates connection and communication with the PC.
   • Centralni LED: Indicates connection and communication with the control panel.
   • RX/TX LED: Flashes during data transmission (Receive/Transmit) between the PC and the control panel.
5. Initial Communication: Open the Paradox programming software on your PC. Configure the software to use the correct communication port (usually a virtual COM port assigned to the USB module). Attempt to establish communication with the control panel.

The module supports communication speeds of up to 38.4 K with Digiplex EVO central units and 9.6 K with Magellan and Spectra SP central units.

3. Upute za rad

The Paradox 307-USB Module acts as a bridge, facilitating data exchange. Its operation is primarily managed through the Paradox programming software on your PC.

• Softversko sučelje: All programming, configuration, and diagnostic tasks are performed within the Paradox software. Refer to the software's user manual for detailed instructions on specific functions.
• LED diode za nadzor: Pay attention to the LED indicators on the module. A steady PC and Central LED, along with flashing RX/TX LEDs during data transfer, indicate proper communication.
• Prijenos podataka: When you initiate a command or request data from the control panel via the software, the module will transmit and receive information, indicated by the RX/TX LEDs.
• Ažuriranja firmvera: The module can be used to update the firmware of compatible Paradox control panels, as guided by the programming software. Ensure a stable power supply to both the PC and the control panel during firmware updates to prevent data corruption.

4. Održavanje

The Paradox 307-USB Module is designed for low maintenance. To ensure its longevity and reliable performance, consider the following:

• Čišćenje: Keep the module clean and free from dust. Use a soft, dry cloth for cleaning. Avoid liquid cleaners or abrasive materials.
• Okruženje: Store and operate the module in a dry environment, away from extreme temperatures, direct sunlight, and high humidity.
• Veze: Periodically check the USB and serial cable connections to ensure they are secure and free from damage.
• Skladištenje: When not in use, store the module in a safe place to prevent physical damage.

5. Rješavanje problema

If you encounter issues with your Paradox 307-USB Module, refer to the following common troubleshooting steps:

If problems persist, consult the Paradox programming software's help documentation or contact Paradox technical support.

6. Specifikacije

Key technical specifications for the Paradox 307-USB Module:

• Proizvođač: PARADOKS
• Model: 307-USB Module
• sučelje: USB to Serial (DB-9)
• LED indikatori: PC, Central, RX/TX
• Brzina komunikacije:
  • 38.4 K baud with Digiplex EVO central units
  • 9.6 K baud with Magellan and Spectra SP central units
• Dimenzije paketa: Otprilike 14.6 x 8.2 x 2.8 cm (5.75 x 3.23 x 1.1 inča)
• Težina: Otprilike 20 g (0.7 oz)
• baterije: Not included, not required
• ASIN: B0743FNJ3P
• Prvi dostupan datum: 25. srpnja 2017

7. Informacije o jamstvu

Specific warranty terms for the Paradox 307-USB Module are provided by the manufacturer, Paradox, and may vary based on region and point of purchase. Please retain your proof of purchase for warranty claims.

For detailed warranty information, including coverage period and conditions, please refer to the documentation included with your product or visit the official Paradox website. Any repairs or modifications performed by unauthorized personnel will void the warranty.

8. Tehnička podrška i kontakt

For technical assistance, troubleshooting beyond this manual, or inquiries regarding your Paradox 307-USB Module, please contact Paradox technical support.

• Službenik Webstranica: Visit the official Paradox Security Systems website for support resources, FAQs, software downloads, and contact information.
• Distributor/Installer: If you purchased the module through an authorized distributor or had it installed by a professional, they may be able to provide direct support.
• Mrežni resursi: Check online forums or communities dedicated to Paradox products for peer-to-peer support and shared solutions.

When contacting support, please have your product model (307-USB Module) and any relevant error messages or observations ready to facilitate a quicker resolution.