AUTOOL BT360

AUTOOL BT360 12V tester opterećenja baterija - upute za uporabu

Model: BT360

1. Uvod

The AUTOOL BT360 is a 12V battery load tester designed to analyze the health status of automotive batteries. It performs battery tests, cranking tests, and charging system tests, providing accurate results for various battery types including regular flooded, AGM flat plate, AGM spiral, and Gel batteries. This manual provides detailed instructions for the proper use and maintenance of your BT360 tester.

2. Sigurnosne informacije

Always observe the following safety precautions when using the AUTOOL BT360 battery tester:

  • Wear appropriate eye protection and protective clothing when working near batteries.
  • Osigurajte da je vozilo u dobro prozračenom prostoru.
  • Avoid sparks, flames, and smoking near the battery, as batteries can produce explosive gases.
  • Do not touch hot engine parts or moving components.
  • Keep the tester and cables away from water, oil, and grease.
  • Uvjerite se da je baterija clamps are securely connected to the correct terminals (red to positive, black to negative).
  • Ako kiselina iz baterije dođe u kontakt s kožom ili očima, odmah isperite s puno vode i potražite liječničku pomoć.

3. Proizvod je gotovview

3.1 Komponente

The AUTOOL BT360 package typically includes:

  • AUTOOL BT360 Main Unit
  • Integrated Testing Cables with Alligator Clamps (crvena za pozitivno, crna za negativno)
  • Korisnički priručnik (ovaj dokument)
AUTOOL BT360 Battery Tester box contents

Image 3.1: AUTOOL BT360 Battery Tester and its included accessories.

3.2 Tester Unit

AUTOOL BT360 Battery Tester front view

Slika 3.2: Prednja strana view of the AUTOOL BT360 Battery Tester, showing the display and control buttons.

The main unit features an LCD display and four control buttons:

  • ESC: Escape/Back button.
  • ORL: Enter/Confirm button.
  • Strelice gore/dolje: Navigacijske tipke za odabir izbornika.

3.3 Ključne značajke

  • Performs Battery Test, Cranking Test, and Charging Test.
  • Supports multiple battery types: Regular Flooded, AGM Flat Plate, AGM Spiral, and Gel.
  • Wide CCA testing range: 100-2400 CCA.
  • Višejezična podrška za korisničko sučelje.
AUTOOL BT360 Multi-language support

Image 3.3: The AUTOOL BT360 supports multiple languages for its user interface.

4. Specifikacije

AUTOOL BT360 Battery Tester dimensions

Image 4.1: Physical dimensions of the AUTOOL BT360 Battery Tester.

ParametarVrijednost
ModelBT360
Sustav Voltage12 volti
Ulazni voltage Domet9V ~ 15V
CCA raspon100-2400 CCA
Radna temperatura-20°C do 50°C
Podržane vrste baterijaRegular Flooded, AGM Flat Plate, AGM Spiral, Gel
Dimenzije (D x Š x V)18.8 x 16.76 x 5.84 cm
Težina320 ​​g
UPC602860607704

4.1 Supported Starting Power Supply Standards

AUTOOL BT360 Supported CCA standards table

Image 4.2: Table showing various starting power supply standards supported by the BT360.

StandardRaspon
CCA100-2400
JIS26A17-245H52
DIN100-2200
IEC100-2200
EN100-1400
SAE100-2400
GB30-220Ah
BCI100-2400
MCA100-2400
CA100-2400

5. Postavljanje

5.1 Raspakiranje

Carefully remove the AUTOOL BT360 tester and all accessories from the packaging. Inspect for any signs of damage. If any components are missing or damaged, contact customer support.

5.2 Spajanje testera

The BT360 is powered directly by the vehicle's 12V battery. Follow these steps to connect the tester:

  1. Provjerite je li paljenje vozila isključeno i je li sva dodatna oprema isključena.
  2. Spojite crvena pozitivan (+) clamp to the positive (+) terminal of the 12V battery.
  3. Spojite crna negativni (-) clamp to the negative (-) terminal of the 12V battery.
  4. Once connected, the tester will power on automatically.
AUTOOL BT360 Battery Tester with cables

Image 5.1: The AUTOOL BT360 tester with its integrated testing cables and clamps.

AUTOOL BT360 Battery Tester connected to a car battery

Image 5.2: The BT360 tester connected to a vehicle battery for testing.

6. Upute za rad

After connecting the tester, the main menu will appear. Use the Up/Down arrow buttons to navigate through options and the ENT button to confirm selections. Use the ESC button to go back to the previous screen.

AUTOOL BT360 display screens showing test options and results

Image 6.1: Various display screens of the AUTOOL BT360, illustrating menu navigation and test result displays.

6.1 Test baterije

This function evaluates the overall health of the battery.

  1. U glavnom izborniku odaberite Test baterije and press ENT.
  2. Odaberite Položaj baterije: Choose 'In-Vehicle' if the battery is installed in the car, or 'Out-of-Vehicle' if it's removed. Press ENT.
  3. Odaberite Vrsta baterije: Choose the type that matches your battery (e.g., Regular Flooded, AGM Flat Plate, AGM Spiral, Gel). Press ENT.
  4. Odaberite Testni standard: Choose the standard specified on your battery (e.g., CCA, JIS, DIN). Press ENT.
  5. set Ocjena baterije: Input the CCA value (or equivalent rating) as indicated on your battery label. Use arrow buttons to adjust the value and ENT to confirm.
  6. The tester will perform the analysis and display results such as State of Health (SOH), State of Charge (SOC), voltage, internal resistance, and a recommendation (e.g., 'Good Battery', 'Charge', 'Replace').

6.2 Test pokretanja

This test analyzes the vehicle's starting system, including the starter motor.

  1. U glavnom izborniku odaberite Test zakretanja and press ENT.
  2. Follow the on-screen prompts to start the vehicle. The tester will monitor the battery voltage tijekom pokretanja.
  3. Once the test is complete, the display will show cranking voltage, cranking time, and a diagnosis of the starting system's performance.

6.3. Test punjenja

This test evaluates the vehicle's charging system, including the alternator and regulator.

  1. U glavnom izborniku odaberite Test punjenja and press ENT.
  2. Follow the on-screen prompts to rev the engine to a specified RPM (e.g., 2500 RPM for 5 seconds).
  3. Tester će mjeriti volumen punjenjatage under load and no-load conditions.
  4. The results will indicate the charging system's output, ripple voltage, and overall health (e.g., 'Good', 'Low Output', 'High Output').

7. Održavanje

To ensure the longevity and accuracy of your AUTOOL BT360 tester:

  • Clean the tester with a soft, dry cloth. Do not use abrasive cleaners or solvents.
  • Držite bateriju čistomampčist je i bez korozije.
  • Tester čuvajte na suhom i hladnom mjestu, dalje od izravne sunčeve svjetlosti i ekstremnih temperatura.
  • Izbjegavajte ispuštanje uređaja ili njegovo izlaganje jakim udarcima.

8. Rješavanje problema

If you encounter issues with your AUTOOL BT360, refer to the following common problems and solutions:

ProblemMogući uzrokOtopina
Tester se ne uključuje.Loose connection; Battery voltage too low; Faulty cables.Osigurajte clampsu sigurno spojeni. Provjerite napon baterijetage (must be above 9V). Inspect cables for damage.
Netočna očitanja.Incorrect battery type/standard/rating selected; Corroded battery terminals.Verify selected parameters match the battery. Clean battery terminals.
Prikazuje se poruka o pogrešci.Specifičan uvjet greške.Refer to the specific error code (if any) or re-run the test ensuring all steps are followed correctly.
Zaslon je prazan ili zamrznut.Softverski kvar; Prekid napajanja.Disconnect and reconnect the tester to reset. If problem persists, contact support.

9. Jamstvo i podrška

For warranty information and technical support, please refer to the documentation provided with your purchase or visit the official AUTOOL webstranicu. Sačuvajte račun kao dokaz o kupnji za slučaj reklamacije.

Proizvođač: AUTOOL

Datum prve dostupnosti: 27. listopada 2017

Povezani dokumenti - BT360

prijeview AUTOOL BT360 Upute za uporabu testera baterijskog sustava
Sveobuhvatni korisnički priručnik za AUTOOL BT360 tester baterijskog sustava, s detaljnim opisom njegovih funkcija, tehničkih parametara, rada i održavanja. Naučite kako točno testirati baterije vozila, sustave pokretanja i sustave punjenja.
prijeview AUTOOL BT360 Upute za uporabu testera baterijskog sustava
Ovaj korisnički priručnik pruža sveobuhvatne upute za rukovanje AUTOOL BT360 testerom baterijskog sustava. Obuhvaća uvod u proizvod, značajke, parametre, strukturu, postupke rada za baterije, paljenje i testiranje punjenja, postavke, održavanje, jamstvo i usluge povrata/zamjene.
prijeview AUTOOL BT-660 Tester vodljivosti baterije - Korisnički priručnik
Korisnički priručnik za AUTOOL BT-660 tester vodljivosti baterije, s detaljnim specifikacijama, uputama za korištenje za testove baterije, pokretanja i punjenja, podacima...view, ispis i izvoz. Pomaže u dijagnosticiranju kvarova sustava za pokretanje i punjenje vozila.
prijeview AUTOOL BT 760 Upute za uporabu ispitivača baterijskog sustava
Sveobuhvatni korisnički priručnik za AUTOOL BT 760 tester baterijskog sustava, u kojem su detaljno opisane njegove značajke, funkcije, tehničke specifikacije i postupci rada za testiranje automobilskih i motociklističkih baterija.
prijeview Korisnički priručnik za autodijagnostički multimetar
Sveobuhvatni korisnički priručnik za AUTOOL autodijagnostički multimetar, koji pokriva njegove značajke, rad i razne funkcije testiranja automobila, uključujući volumentage, struja, otpor, osciloskop, ispitivanja automobilskih strujnih krugova, ispitivanja injektora, ispitivanja releja i analiza signala.
prijeview AUTOOL BT960 Priručnik za korisnike ispitivača baterijskog sustava - Značajke i rad
Sveobuhvatni korisnički priručnik za AUTOOL BT960 tester baterijskog sustava. Obuhvaća testiranje olovnih i litijevih baterija, pokretanje, punjenje, testove opterećenja,tagMjerenje električne struje, sigurnost i rad. Posjetite www.autooltech.com za više informacija.