1. Uvod
This instruction manual provides essential information for the safe and efficient installation, operation, and maintenance of the Eltako WSZ15DE-32A Digital AC Current Meter. Please read this manual thoroughly before using the device and retain it for future reference.
2. Sigurnosne informacije
UPOZORENJE: Opasnost od strujnog udara. Instalaciju i održavanje smije obavljati samo kvalificirano osoblje.
- Uvijek isključite napajanje prije instalacije ili održavanja.
- Ensure all connections are secure and correctly wired according to the diagram.
- Nemojte koristiti uređaj ako je oštećen.
- Pridržavajte se svih lokalnih i nacionalnih električnih propisa.
- Uređaj je namijenjen za unutarnju upotrebu u suhim uvjetima.
3. Proizvod je gotovview
The Eltako WSZ15DE-32A is a single-phase digital AC current meter designed for measuring energy consumption. It features a clear LCD display and S0 output for pulse counting.
Slika 3.1: Prednja strana view of the Eltako WSZ15DE-32A meter. This image displays the front of the meter, showing the model number WSZ15DE-32A, the Eltako brand logo, and the technical specifications printed on the label, including wiring instructions for Phase IN/OUT, Neutral, and S0 output terminals. The LCD display is visible, showing a reading of '00000.00'.
Ključne karakteristike:
- Single-phase energy meter, Class B
- Rated current: 0.25-5(32)A
- Voltage: 230V 50Hz
- Radna temperatura: -25°C do +55°C
- LCD display for energy readings
- S0 output: 1000 Imp/kWh (LCD), 2000 Imp/kWh (S0 output)
- Montaža na DIN šinu
4. Postavljanje i instalacija
The Eltako WSZ15DE-32A is designed for DIN rail mounting. Follow these steps for proper installation:
- Montaža: Securely attach the meter to a standard DIN rail in an electrical distribution box. The meter features clips on the back for easy installation.
- Ožičenje: Refer to the wiring diagram on the device label for correct connections.
- Connect the incoming phase (L) to the 'IN' terminal.
- Connect the outgoing phase (L) to the 'OUT' terminal.
- Connect the incoming neutral (N) to the 'N' terminal.
- Connect the outgoing neutral (N) to the 'N' terminal.
- For S0 pulse output, connect S0+ and S0- terminals to a compatible pulse counter or data logger.
- Provjera: After wiring, double-check all connections for tightness and correctness before restoring power.
Slika 4.1: Bočna strana view showing DIN rail mounting clips. This image shows the side and back of the Eltako WSZ15DE-32A meter, highlighting the integrated clips designed for secure attachment to a standard DIN rail.
Figure 4.2: Close-up of wiring diagram and display. This detailed image focuses on the wiring terminals and the LCD display of the Eltako WSZ15DE-32A meter. The diagram clearly illustrates connections for Phase (IN/OUT), Neutral (N), and S0 output (S0+/S0-), along with the energy reading on the LCD.
5. Upute za rad
Once installed and powered, the Eltako WSZ15DE-32A meter will automatically begin measuring and displaying energy consumption.
Čitanje zaslona:
The LCD display shows the total accumulated energy consumption in kilowatt-hours (kWh). The reading is typically displayed with two decimal places.
S0 Pulse Output:
The S0 output provides electrical pulses proportional to the energy consumed. This can be connected to external systems for remote monitoring or data logging. The pulse rate is 1000 Imp/kWh for the LCD and 2000 Imp/kWh for the S0 output.
6. Održavanje
The Eltako WSZ15DE-32A is a low-maintenance device. Follow these guidelines:
- Čišćenje: Use a soft, dry cloth to clean the exterior of the meter. Do not use abrasive cleaners or solvents.
- Inspekcija: Periodically inspect the wiring connections for any signs of loosening or damage.
- Okruženje: Osigurajte da radno okruženje ostane unutar navedenih raspona temperature i vlažnosti.
7. Rješavanje problema
If you encounter issues with your Eltako WSZ15DE-32A meter, consider the following:
| Problem | Mogući uzrok | Otopina |
|---|---|---|
| Zaslon je prazan | Nema napajanja; neispravno ožičenje. | Check power supply to the circuit. Verify wiring connections according to the diagram. |
| Meter not counting energy | Incorrect wiring; no load connected. | Ensure phase and neutral connections are correct and a load is drawing current. |
| S0 output not working | Incorrect S0 wiring; incompatible external device. | Verify S0+ and S0- connections. Consult the manual for the external pulse counter. |
If the problem persists, contact qualified technical support.
8. Specifikacije
Detailed technical specifications for the Eltako WSZ15DE-32A Digital AC Current Meter:
| Parametar | Vrijednost |
|---|---|
| Broj modela | WSZ15DE-32A |
| Tip | Jednofazno brojilo električne energije |
| Klasa točnosti | Klasa B |
| Ocijenjeno svtage | 230 volti |
| Frekvencija | 50 Hz |
| Nazivna struja | 0.25-5(32) A |
| Maksimalna struja | 32 A |
| S0 Output Pulse Rate (LCD) | 1000 Imp./kWh |
| S0 Output Pulse Rate (S0) | 2000 Imp./kWh |
| Radna temperatura | -25°C do +55°C |
| Vrsta montaže | DIN tračnica |
| Dimenzije (D x Š x V) | 6.4 x 1.8 x 8.2 cm |
| Težina | 80 gram |
| Certifikati | CE |
Figure 8.1: Dimensions of the Eltako WSZ15DE-32A meter. This image illustrates the approximate dimensions of the meter, indicating a width of 2.5 inches (6 cm), which is relevant for installation planning.
9. Jamstvo i podrška
Eltako products are manufactured to high-quality standards. For warranty information and technical support, please refer to the official Eltako webstranicu ili se obratite lokalnom distributeru.
Spare parts availability: 1 Year (as per product specifications).
