OREI HD18-EX165-K 1x8 HDMI Extender Splitter User Manual

1. Uvod

The OREI HD18-EX165-K is a high-performance 1x8 HDMI Extender Splitter designed to distribute a single HDMI source to up to eight HDMI displays simultaneously over CAT6/6a/7 network cables. This device supports resolutions up to 4K@30Hz (for 1x2 and 1x4 models) and 1080p@60Hz (up to 230ft), making it suitable for various applications including home entertainment, video conferences, meeting rooms, and digital signage. It features Power Over LAN (PoL) for receiver units, eliminating the need for separate power adapters at each display location, and includes EDID management and IR pass-back functionality for enhanced control and compatibility.

2. Sadržaj paketa

Molimo Vas da provjerite da li su sve dolje navedene stavke uključene u Vaš paket:

• 1 x OREI HD18-EX165-K Transmitter Unit
• 8 x OREI HD18-EX165-K Receiver Units
• 1 x 12V DC adapter
• 1 x IR Blaster kabel
• 8 x kabela za IR prijemnik
• 1 x korisnički priručnik
• Mounting Brackets (for transmitter)

Figure 1: OREI HD18-EX165-K Transmitter and Receiver Units

Slika 2: Sadržaj paketa iznadview

3. Proizvod je gotovview

3.1 Transmitter Unit (HD18-EX165-K)

The transmitter unit is the central hub for your HDMI signal distribution. It features multiple CAT output ports, an HDMI input, an HDMI loop-out, and controls for EDID management and IR transmission.

Figure 3: Transmitter Unit Ports and Indicators

• CAT OUT 1-8: RJ45 outputs for connecting to receiver units via CAT6/6a/7 cable.
• HDMI ulaz: Connect your HDMI source device (e.g., DVD player, game console).
• HDMI OUT (Loop Out): Connect a local display to monitor the HDMI source.
• IR IZLAZ: Connect the IR Blaster cable to control the source device remotely.
• EDID: DIP switches for EDID management to ensure display compatibility.
• AŽURIRATI: Micro USB port for firmware updates.
• DC 12 V: Power input for the transmitter unit.
• PWR ON/OFF: Prekidač za napajanje uređaja.
• LED za napajanje: Označava status napajanja.

3.2 Prijemna jedinica

Each receiver unit connects to a display and receives the HDMI signal and power via a single CAT6/6a/7 cable from the transmitter. It also features an IR input for remote control functionality.

• MAČKA U: RJ45 input for connecting to the transmitter unit via CAT6/6a/7 cable.
• HDMI IZLAZ: Connect to your display device (e.g., TV, monitor).
• IR IN: Connect the IR Receiver cable to receive remote control signals.
• EQ: DIP switches for equalization adjustment based on cable length.

4. Upute za postavljanje

Follow these steps to set up your OREI HD18-EX165-K HDMI Extender Splitter:

1. Spojite HDMI izvor: Connect your HDMI source device (e.g., DVD player, cable box) to the HDMI ULAZ port on the transmitter unit using a high-quality HDMI cable.
2. Spoji zaslone: Connect each HDMI display to the HDMI IZLAZ port on its respective receiver unit using high-quality HDMI cables.
3. Connect CAT Cables: Spojite MAČKA ports on the transmitter unit to the MAČKA U ports on each receiver unit using individual CAT6/6a/7 network cables. Ensure cables are properly terminated.
4. (Optional) Local Display: If desired, connect a local display to the HDMI IZLAZ (izlaz petlje) port on the transmitter unit to monitor the source signal.
5. (Optional) IR Control:
   • Spojite kabel IR Blastera na IC IZLAZ port on the transmitter unit and position the blaster head near the IR sensor of your HDMI source device.
   • Connect the IR Receiver cables to the IR IN ports on each receiver unit and position the receiver head in a location where it can receive signals from your remote control.
6. Uključivanje: Connect the 12V DC power adapter to the DC 12V port on the transmitter unit and plug it into a power outlet. Turn on the power switch. The Power LED on the transmitter should illuminate. Receiver units will receive power via the CAT cable (PoL).
7. Adjust EQ Switches (Receivers): Based on the length of your CAT cable runs, adjust the EQ DIP switches on each receiver unit for optimal signal quality. Refer to the user manual for specific settings based on cable length.
8. Adjust EDID Switches (Transmitter): Konfigurirajte EDID DIP switches on the transmitter unit to match the desired audio and video format for your displays. Refer to the user manual for specific settings.

Slika 4: Tipični dijagram spajanja

5. Upute za rad

5.1 Upravljanje EDID-om

The EDID (Extended Display Identification Data) switches on the transmitter unit allow you to manage the communication between your source and displays, ensuring optimal compatibility and picture quality. Incorrect EDID settings can lead to display issues or no signal. Refer to the EDID table in your user manual to select the appropriate settings for your setup.

5.2 EQ (Equalization) Adjustment

The EQ switches on each receiver unit are used to compensate for signal degradation over long CAT cable runs. Adjust these switches based on the actual length of the CAT cable connecting the receiver to the transmitter. Proper EQ adjustment is crucial for maintaining signal integrity and preventing flickering or signal loss. Consult the EQ settings table in your user manual for guidance.

5.3 IR daljinski upravljač

The IR pass-back feature allows you to control your HDMI source device from any of the remote display locations. Simply point your source device's remote control at the IR Receiver connected to the display's receiver unit. The signal will be transmitted back to the IR Blaster connected to the transmitter unit, which then relays the command to your source device.

6. Specifikacije

7. Rješavanje problema

• No Picture/Flickering Image:
  • Check all HDMI and CAT cable connections. Ensure they are secure.
  • Verify the CAT cable type and quality. CAT6/6a/7 is recommended.
  • Podesite EQ switches on the receiver units according to the cable length.
  • Podesite EDID switches on the transmitter unit to match your display's capabilities. Try different EDID settings.
  • Ensure the power adapter is securely connected to the transmitter and the unit is powered on.
• IR daljinski upravljač ne radi:
  • Ensure the IR Blaster is correctly connected to the transmitter and positioned directly in front of the source device's IR sensor.
  • Ensure the IR Receiver is correctly connected to the receiver unit and positioned to receive signals from your remote control.
  • Check for any obstructions between your remote and the IR Receiver.
• Povremeni signal:
  • Ensure all cables are of good quality and not damaged.
  • Avoid bending CAT cables sharply, as this can affect signal integrity.
  • Provjerite elektromagnetske smetnje (EMI) od drugih elektroničkih uređaja.

8. Jamstvo i podrška

The OREI HD18-EX165-K HDMI Extender Splitter comes with a 1-Year OREI Manufacturer's Warranty. For technical assistance or warranty claims, please contact OREI customer support. Contact information can typically be found on the OREI webmjestu ili pakiranju proizvoda.