TecTake 403238 / 800747 Upute za uporabu okretne uredske stolice

Uvod

This manual provides detailed instructions for the assembly, operation, and maintenance of your TecTake 403238 / 800747 Swivel Office Chair. Please read these instructions carefully before assembly and use to ensure proper function and longevity of your product. This ergonomic office chair is designed for comfort and support during extended periods of sitting, featuring a padded seat, backrest, and headrest, along with adjustable height and tilt functions.

Image: The TecTake 403238 / 800747 Swivel Office Chair, showcasing its black faux leather upholstery, padded armrests, and five-star base with casters.

Sigurnosne upute

Kako biste spriječili ozljede ili oštećenje stolice, molimo vas da se pridržavate sljedećih sigurnosnih uputa:

• Ensure all components are securely fastened before use. Regularly check and tighten screws.
• Ne prekoračujte maksimalnu nosivost stolice (pogledajte specifikacije).
• Izbjegavajte stajanje na stolici ili korištenje iste kao stepenice.
• Keep hands and fingers clear of moving parts, especially during height and tilt adjustments.
• Koristite stolicu na ravnoj površini kako biste spriječili prevrtanje.
• Držite materijale za pakiranje dalje od djece kako biste spriječili opasnost od gušenja.
• Do not expose the chair to direct sunlight or extreme temperatures, as this may damage the material.

Popis komponenti

Prije početka sastavljanja provjerite jesu li svi dijelovi prisutni i neoštećeni. Ako bilo koji dio nedostaje ili je oštećen, nemojte nastaviti sa sastavljanjem i obratite se korisničkoj podršci.

• naslon za leđa
• Jastuk za sjedenje
• Nasloni za ruke (lijevi i desni)
• Ploča mehanizma (ispod sjedala)
• Cilindar za plinsko podizanje
• Poklopac plinskog lifta
• Baza s pet zvjezdica
• Kotačići (5 komada)
• Hardware (screws, washers, Allen key)

Upute za sastavljanje

Follow these steps to assemble your office chair. It is recommended to assemble the chair on a soft, clean surface to prevent scratches.

Korak 1: Pričvrstite kotačiće na bazu

Umetnite svaki od pet kotačića u rupe na kraju svake noge petozvjezdastog podnožja. Čvrsto pritisnite dok ne kliknu na svoje mjesto.

Korak 2: Umetnite plinski lift

Place the gas lift cylinder into the central hole of the five-star base. Then, slide the gas lift cover over the gas lift cylinder.

Step 3: Attach Mechanism Plate to Seat

Align the mechanism plate with the pre-drilled holes on the underside of the seat cushion. Ensure the adjustment lever faces the front of the seat. Secure it with the provided screws and tighten them using the Allen key.

Image: Close-up of the chair's adjustment lever, indicating its function for height and tilt control. This lever is part of the mechanism plate that attaches to the seat.

Step 4: Attach Armrests to Seat and Backrest

Attach the armrests to the sides of the seat cushion using the designated screws. Do not fully tighten yet. Then, align the backrest with the armrests and secure it with screws. Once all screws are in place, tighten them evenly and securely.

Korak 5: Spojite sklop sjedala na plinski lift

Carefully place the assembled seat and backrest onto the gas lift cylinder. The tapered end of the gas lift will fit into the central hole of the mechanism plate. Press down firmly on the seat to ensure a secure connection.

Slika: prednja strana view of the fully assembled TecTake office chair, highlighting the padded seat, backrest, and armrests.

Your TecTake office chair is now assembled. Before use, ensure all connections are tight and the chair is stable.

Upute za rad

Your TecTake office chair offers several adjustments to customize your seating experience:

Podešavanje visine

Za podešavanje visine sjedala, pronađite polugu na desnoj strani, ispod sjedala.

• Za podizanje sjedala: Podignite polugu dok se odmičete od sjedala. Sjedalo će se automatski podići. Otpustite polugu na željenoj visini.
• Za spuštanje sjedala: Podignite polugu dok ostajete sjedeći. Sjedalo će se spustiti. Otpustite polugu na željenoj visini.

Tilt Function and Lock

The chair features a tilt mechanism allowing the backrest and seat to recline together.

• Za omogućavanje nagiba: Pull the same lever (used for height adjustment) outwards from the chair. The chair will now allow you to recline.
• Za zaključavanje nagiba: Push the lever inwards towards the chair. The chair will lock in its upright position.

Image: An illustration demonstrating the range of height adjustment and the reclining tilt function of the office chair.

Podešavanje napetosti nagiba

Beneath the seat, at the front, there is a round knob. This knob controls the tension of the tilt mechanism.

• To increase tension (harder to recline): Okrenite gumb u smjeru kazaljke na satu.
• To decrease tension (easier to recline): Okrenite gumb suprotno od smjera kazaljke na satu.

Održavanje

Redovito održavanje pomoći će produžiti vijek trajanja i izgled vaše uredske stolice.

• Čišćenje: For the faux leather upholstery, wipe with a soft, damp cloth. For stubborn stains, use a mild soap solution and wipe dry immediately. Avoid abrasive cleaners, solvents, or harsh chemicals, as these can damage the material.
• Okvir i baza: Obrišite metalne i plastične dijelove oglasomamp tkanina.
• Kotačići: Periodically clean casters to remove hair, dust, and debris that may hinder smooth movement.
• Hardver: Every 3-6 months, check all screws and bolts to ensure they are tight. Retighten as necessary to maintain stability and safety.
• Izbjegavajte preopterećenje: Do not exceed the chair's stated weight capacity.

Rješavanje problema

Ako naiđete na bilo kakve probleme sa svojom stolicom, pogledajte sljedeće uobičajene probleme i rješenja:

• Škripanje stolice:

  Check all screws and bolts and tighten them. A small amount of silicone lubricant can be applied to moving metal parts, avoiding contact with plastic or upholstery.
• Stolica se ne podešava po visini:

  Provjerite je li poluga plinskog podizača potpuno učvršćena. Ako problem i dalje postoji, cilindar plinskog podizača možda je neispravan i potrebno ga je zamijeniti. Obratite se korisničkoj podršci.

• Stolica je nestabilna/klimava:

  Verify that all screws, especially those connecting the armrests to the seat and backrest, are securely tightened. Ensure the gas lift is properly seated in the base and mechanism plate.

• Kotačići se ne kotrljaju glatko:

  Remove any hair, dust, or debris that may be caught in the caster wheels. Clean the wheels and axles. Ensure the casters are fully inserted into the base.

Tehnički podaci

Dimenzije (približno)

Image: Technical drawing illustrating the approximate dimensions of the TecTake office chair in centimeters. Key measurements include seat width (55 cm), seat depth (52 cm), backrest width (48 cm), adjustable seat height (47-55 cm), and overall height (115-123 cm).

• Overall Height: 115-123 cm
• Seat Height (adjustable): 47-55 cm
• Širina sjedala: 55 cm
• Dubina sjedala: 52 cm
• Backrest Width: 48 cm
• Armrest Height (from seat): 68.5-76.5 cm
• Base Diameter: 67 cm

Jamstvo i podrška

Specific warranty information for the TecTake 403238 / 800747 Swivel Office Chair is not provided in this document. For details regarding warranty coverage, spare parts availability, or technical support, please refer to the official TecTake website or contact their customer service directly. Information regarding spare parts availability was not provided in the product data.

Možete posjetiti TecTake Brand Store on Amazon za više informacija.