1. Uvod
This manual provides comprehensive instructions for the installation, operation, and maintenance of the Intelbras IVP 2000 SF Wireless Passive Infrared Sensor. This device is designed to detect motion by sensing infrared radiation emitted by moving objects, providing an essential component for security systems.
2. Sigurnosne informacije
- Pažljivo pročitajte sve upute prije postavljanja i rada.
- Do not expose the sensor to direct sunlight, extreme temperatures, or high humidity.
- Osigurajte da je uređaj postavljen na stabilno mjesto kako biste spriječili slučajne padove.
- Only use the specified battery type. Incorrect battery usage may cause damage or malfunction.
- Držite uređaj izvan dohvata djece.
3. Sadržaj paketa
Provjerite jesu li svi artikli prisutni u paketu:
- 1x Intelbras IVP 2000 SF Wireless Passive Infrared Sensor
- 1x nosač za montiranje
- 1x Set of Screws and Wall Plugs
- 1x Battery (Alkaline)
- 1x Quick Start Guide (this manual)
4. Proizvod je gotovview
The Intelbras IVP 2000 SF is a wireless passive infrared sensor designed for indoor use. It features advanced detection technology to minimize false alarms and ensure reliable security monitoring.
Slika 1: Ispred view of the Intelbras IVP 2000 SF sensor. This image displays the white casing of the sensor with the Intelbras logo and "IVP 2000 SF" model designation clearly visible on the top front. The translucent detection lens is prominent on the lower front section.
Ključne komponente:
- PIR Lens: Detects infrared radiation from moving bodies.
- LED indikator: Provides status feedback (e.g., detection, low battery).
- Odjeljak za baterije: Sadrži izvor napajanja.
- Montažne točke: For secure installation on a wall.
- Tamper prekidač: Triggers an alarm if the sensor cover is opened.
5. Postavljanje
5.1. Ugradnja baterije
- Open the sensor's front cover by gently prying it open from the bottom notch.
- Insert the provided alkaline battery into the battery compartment, observing the correct polarity (+/-).
- Close the front cover, ensuring it clicks securely into place.
5.2. Montiranje senzora
The sensor is designed for wall mounting. Choose a location that provides optimal coverage of the area to be protected, avoiding direct heat sources or air conditioning vents.
- Select a mounting height between 2.0 to 2.2 meters (6.5 to 7.2 feet) from the floor.
- Koristite montažni nosač kao predložak za označavanje položaja vijaka na zidu.
- Izbušite rupe na označenim mjestima i umetnite tiple u zid.
- Pričvrstite nosač za montažu na zid pomoću priloženih vijaka.
- Attach the sensor unit to the mounting bracket, ensuring it is firmly seated.
5.3. Pairing with a Security System
Refer to your Intelbras security system or smart hub manual for specific instructions on how to add a new wireless sensor. Generally, the process involves:
- Putting your security system into "pairing" or "enrollment" mode.
- Activating the sensor (e.g., by triggering it or pressing a specific button, if available, or by installing the battery for the first time).
- Confirming successful pairing through the system's interface or LED indicators.
6. Upravljanje senzorom
6.1. Detection Principle
The IVP 2000 SF sensor operates on the principle of passive infrared (PIR) detection. It detects changes in infrared energy within its field of view, which are typically caused by the movement of a warm body. When a significant change is detected, the sensor transmits a signal to the connected security system.
6.2. Status LED indikatora
- Brief Flash: Indicates motion detection.
- Continuous Flash: May indicate low battery or a fault. Refer to the troubleshooting section.
- Bez svjetla: Normal standby mode, or battery is completely depleted.
6.3. Detection Range and Coverage
The sensor typically offers a detection range of up to 12 meters (39 feet) with a coverage angle of approximately 90 degrees. Optimal performance is achieved when movement occurs across the sensor's field of view rather than directly towards it.
7. Održavanje
7.1. Čišćenje
Periodically clean the sensor's lens and casing with a soft, dry cloth. Do not use abrasive cleaners or solvents, as these can damage the device.
7.2. Zamjena baterije
When the LED indicator signals a low battery (e.g., continuous flashing or specific system notification), replace the battery promptly. Follow the battery installation steps outlined in section 5.1. Dispose of old batteries according to local regulations.
7.3. Redovite provjere
Test the sensor's functionality regularly (e.g., monthly) by walking through its detection zone to ensure it triggers an alarm or notification on your security system.
8. Rješavanje problema
| Problem | Mogući uzrok | Otopina |
|---|---|---|
| Senzor ne detektira pokret. |
|
|
| Lažni alarmi. |
|
|
| LED indicator flashing continuously. | Prazna baterija. | Zamijenite bateriju. |
| Sensor not communicating with the security system. |
|
|
9. Specifikacije
- Marka: Intelbras
- Model: IVP2000SF
- Izvor napajanja: Napajanje na baterije
- Vrsta baterije: Alkalna
- Vrsta montaže: Zidni nosač
- Kompatibilni uređaji: Intelbras security systems and smart home hubs
- Dimenzije proizvoda: Otprilike 17 x 10 x 9 cm (6.7 x 3.9 x 3.5 inča)
- Metoda otkrivanja: Pasivni infracrveni (PIR)
- Raspon detekcije: Do 12 metara (39 stope)
- Kut detekcije: Otprilike 90 stupnjeva
- Radno okruženje: Samo za unutarnju upotrebu
10. Informacije o jamstvu
Intelbras products are covered by a limited warranty. For detailed warranty terms and conditions, please refer to the official Intelbras webweb-mjesto ili kontaktirajte njihovu korisničku podršku. Sačuvajte dokaz o kupnji za slučaj zahtjeva za jamstvo.
11. Podrška
If you encounter any issues or have questions regarding your Intelbras IVP 2000 SF sensor that are not covered in this manual, please contact Intelbras customer support through their official channels:
- Webstranica: Posjetite službeni Intelbras webstranica za resurse podrške, često postavljana pitanja i kontakt informacije.
- Telefon: Refer to the contact section on the Intelbras webstranica za lokalne brojeve podrške.
