Strymon Sunset Dual Overdrive Pedal

Uvod

The Strymon Sunset is a versatile dual overdrive pedal designed to provide a wide range of classic overdrive and distortion tones. It features two independent channels, A and B, each offering distinct overdrive circuits, allowing for flexible tone shaping and stacking options. This manual provides detailed instructions on setting up, operating, and maintaining your Sunset pedal.

Postavljanje

Follow these steps to properly set up your Strymon Sunset pedal:

1. Priključak za napajanje: Connect a standard 9V DC power supply (center-negative, 200mA minimum) to the 9VDC input jack on the rear panel. Ensure the power supply meets the specified voltage i trenutni zahtjevi.
2. Ulazni priključak: Spojite svoju gitaru ili neki drugi instrument na IN jack on the rear panel using a standard 1/4-inch instrument cable.
3. Izlazna veza: Spojite VAN jack on the rear panel to your amppojačavač ili sljedeću pedalu u vašem signalnom lancu pomoću standardnog instrumentalnog kabela od 1/4 inča.
4. Dodatne veze:
   • Expression Pedal (EXP): For real-time control over parameters, connect an expression pedal to the EXP utičnica.
   • Favorite Switch (FAV): Connect an external favorite switch to the OMILJENO jack to recall a saved preset.

Figure 1: Rear panel connections of the Strymon Sunset pedal. This view highlights the IN, OUT, FAV, EXP, and 9VDC power input jacks, along with the B->A and A+B switches.

Upute za rad

The Strymon Sunset features two independent overdrive channels, A and B, each with unique voicings and controls. Understanding these controls is key to unlocking the pedal's full potential.

Figure 2: Top panel controls of the Strymon Sunset pedal. This image displays the LEVEL, DRIVE, and TONE knobs for both channels, along with the A and B circuit type switches and footswitches.

Kontrole na prednjoj ploči

• Channel A Controls:
  • LEVEL A: Adjusts the output volume of Channel A.
  • DRIVE A: Controls the amount of gain/overdrive for Channel A.
  • TONE A: Shapes the tonal character of Channel A, typically acting as a high-cut filter.
  • A Circuit Switch: Selects between three distinct overdrive circuits for Channel A:
    • Ge (Germanium): Smooth, warm, and dynamic overdrive, reminiscent of classic germanium diode circuits.
    • Texas: Mid-focused, bluesy overdrive with a distinct character.
    • Soprano: A treble booster circuit, ideal for pushing an already overdriven amp or adding sparkle.
• Channel B Controls:
  • LEVEL B: Adjusts the output volume of Channel B.
  • DRIVE B: Controls the amount of gain/overdrive for Channel B.
  • TONE B: Shapes the tonal character of Channel B.
  • B Circuit Switch: Selects between three distinct overdrive circuits for Channel B:
    • 2 Stage: A classic two-stage soft-clipping overdrive.
    • teško: A harder clipping overdrive with increased compression and sustain.
    • JFET: A JFET-based circuit offering a more amp-like, natural overdrive.
• Nožni prekidači:
  • Nožni prekidač: Engages or bypasses Channel A. The corresponding LED indicates its status.
  • B Nožni prekidač: Engages or bypasses Channel B. The corresponding LED indicates its status.

Prekidači na stražnjoj ploči

• B->A / A+B Switch: This switch determines the stacking order when both channels are engaged:
  • B->A: Channel B feeds into Channel A. This is useful for boosting Channel A with Channel B's gain.
  • A+B: Channels A and B run in parallel. This allows for blending the two distinct tones.
• BRIGHT Switch: A global switch that adds a subtle high-end boost to the overall output.
  • +: Engages the bright boost.
  • -: Disengages the bright boost.

Održavanje

To ensure the longevity and optimal performance of your Strymon Sunset pedal, follow these maintenance guidelines:

• Čišćenje: Use a soft, dry cloth to wipe down the pedal's enclosure. Avoid using abrasive cleaners or solvents, as they may damage the finish or internal components.
• Skladištenje: Pedalu čuvajte na hladnom i suhom mjestu, dalje od izravne sunčeve svjetlosti, ekstremnih temperatura i visoke vlažnosti.
• Napajanje: Always use a regulated 9V DC center-negative power supply that meets the pedal's current requirements (200mA minimum). Using an incorrect power supply can damage the unit and void the warranty.
• Veze: Povremeno provjeravajte sve kabelske spojeve na istrošenost i oštećenja. Provjerite jesu li utičnice bez prašine i ostataka.

Rješavanje problema

If you encounter issues with your Strymon Sunset pedal, refer to the following common problems and solutions:

Tehnički podaci

Jamstvo i podrška

Strymon products are built with high-quality components and undergo rigorous testing. For information regarding warranty coverage, product registration, and technical support, please visit the official Strymon webweb-mjesto ili se obratite njihovoj službi za korisnike. Sačuvajte račun kao dokaz o kupnji za slučaj zahtjeva za jamstvo.

Strymon Official Webstranica: www.strymon.net