1. Uvod
This manual provides essential information for the safe and efficient operation, maintenance, and troubleshooting of your Clarke EX20 100H Carpet Extractor. Please read this manual thoroughly before operating the machine to ensure proper use and to prevent injury or damage.
Figure 1: The Clarke EX20 100H Carpet Extractor, a powerful machine designed for deep carpet cleaning.
2. Sigurnosne informacije
Uvijek se pridržavajte sljedećih sigurnosnih mjera opreza kako biste smanjili rizik od požara, strujnog udara ili ozljede.
- Pročitajte sve upute: Familiarize yourself with the machine's operation before use.
- Električna sigurnost: Ensure the power cord and plug are in good condition. Do not operate with a damaged cord or plug. Connect to a properly grounded outlet only.
- Kemikalije: Use only recommended cleaning solutions. Follow manufacturer's instructions for chemical handling and disposal.
- Ventilacija: Radite u dobro prozračenom prostoru.
- Osobna zaštitna oprema (PPE): Wear appropriate PPE, such as gloves and eye protection, when handling cleaning solutions or operating the machine.
- Nadzor: Ne dopustite djeci ili neobučenom osoblju da rukuju strojem.
- Skladištenje: Store the machine in a dry, secure location away from extreme temperatures.
- Održavanje: Isključite napajanje prije bilo kakvog održavanja ili čišćenja.
3. Postavljanje
Follow these steps to prepare your Clarke EX20 100H for operation:
- Unpack the Extractor: Carefully remove the unit from its packaging. Inspect for any shipping damage.
- Sastavite ručku: Attach the handle assembly to the main unit. Ensure all fasteners are securely tightened.
- Napunite spremnik za otopinu: Open the solution tank cap. Fill the tank with the appropriate carpet cleaning solution mixed according to the solution manufacturer's instructions. Do not overfill.
- Spojite crijeva: Connect the vacuum hose and solution hose to the appropriate ports on the machine and the cleaning wand. Ensure connections are secure to prevent leaks.
- Priključak: Spojite kabel za napajanje u uzemljenu električnu utičnicu.
Figure 2: Accessing the internal components and tanks of the Clarke EX20 100H by lifting the top cover.
4. Upute za rad
Once the unit is set up, follow these steps for effective carpet extraction:
- Predvakuumiranje: Thoroughly vacuum the carpet area to remove loose dirt and debris before extraction.
- Uključite napajanje: Locate the control panel on the machine. Turn on the vacuum and pump switches. The Clarke EX20 100H operates at 100 PSI.
- Započnite čišćenje: With the cleaning wand, make slow, overlapping passes over the carpet. Depress the solution trigger to apply cleaning solution while pulling the wand towards you to extract the dirty water.
- Prazan spremnik za sakupljanje: When the recovery tank is full (indicated by a decrease in vacuum suction or a float shut-off), turn off the machine, disconnect the wand, and empty the dirty water into a suitable drain.
- Spremnik za otopinu za ponovno punjenje: Refill the solution tank as needed.
- Ispiranje (nije obavezno): For heavily soiled carpets or to remove detergent residue, you may perform a rinse pass using only clean water in the solution tank.
- Naknadno čišćenje: Allow the carpet to dry completely before allowing foot traffic. Use fans or open windows to aid drying.
Figure 3: The control panel features clearly labeled switches for activating the spray, vacuum, and heating functions.
5. Održavanje
Regular maintenance ensures the longevity and optimal performance of your extractor.
- Nakon svake upotrebe:
- Empty and rinse both the solution and recovery tanks with clean water.
- Clean the recovery tank filter to prevent clogs.
- Rinse the cleaning wand and hoses.
- Obrišite vanjski dio stroja oglasomamp tkanina.
- Mjesečno:
- Inspect hoses and connections for wear or damage. Replace if necessary.
- Provjerite stanje kabela za napajanje i utikača.
- Clean the spray jets on the wand to ensure even solution distribution.
- Skladištenje: Store the machine in a dry, climate-controlled environment. Do not store with water in the tanks.
6. Rješavanje problema
Uobičajene probleme i njihova rješenja potražite u donjoj tablici.
| Problem | Mogući uzrok | Otopina |
|---|---|---|
| Nema usisavanja | Recovery tank full; Clogged vacuum hose/filter; Loose hose connection; Damaged vacuum motor. | Empty recovery tank; Clean hose/filter; Secure connections; Contact service. |
| Bez spreja | Solution tank empty; Clogged spray jet; Pump not on; Damaged pump. | Refill solution tank; Clean spray jet; Turn on pump switch; Contact service. |
| Stroj se ne uključuje | No power to outlet; Power cord damaged; Internal electrical issue. | Check outlet/breaker; Inspect cord (replace if damaged); Contact service. |
| Curenje vode | Loose hose connections; Damaged seals/gaskets; Cracked tank. | Tighten connections; Inspect and replace seals; Contact service. |
7. Specifikacije
Key technical specifications for the Clarke EX20 100H Carpet Extractor:
| Značajka | Detalj |
|---|---|
| Vrsta proizvoda | Janitorial Supply |
| Dimenzije paketa | 52 x 45 x 28 inča; 87 funti |
| Zemlja porijekla | Meksiko |
| Težina paketa | 87.0 lbs |
| Broj modela artikla | EX20 100H |
| Datum prve dostupnosti | 6. listopada 2020 |
| Proizvođač | Nilfisk, Inc. |
| ASIN | B08KSF87MX |
| Marka | Clarke |
| Stil | Moderno |
| UPC | 706155019187 |
8. Što je u kutiji
The following items are included with your Clarke EX20 100H Carpet Extractor:
- Jedinica za usisavanje tepiha
9. Jamstvo i podrška
For warranty information, technical support, or service inquiries, please refer to the warranty card included with your product or contact Clarke customer service. Keep your purchase receipt as proof of purchase for warranty claims.
For further assistance, you may visit the official Clarke webstranicu ili se obratite ovlaštenom prodavaču.
