Einhell TC-WG 200 Wet Bench Grinder User Manual

Proizvod gotovview

The Einhell wet sander TC-WG 200 is designed for precise sharpening of tools without causing damage to the workpiece. Its wet grinding system continuously supplies water to the cutting edge, effectively preventing frictional heat buildup and annealing of the disc. This versatile device offers flexibility for grinding a wide range of tools. It features a corrosion-free water tank for cooling and includes an angle gauge for precise sanding angle adjustments. The sanding wheel can be prepared using the included grindstone, and the workpiece can be polished with stripping paste. For stability, the unit is equipped with four rubber feet that dampen vibrations and ensure secure placement. The package includes a slow-running, fine-grained wet sanding wheel and a leather sanding wheel for deburring.

Figure 1: The Einhell TC-WG 200 Wet Bench Grinder with its included accessories, including the grinding wheel, honing wheel, angle gauge, and grindstone.

Važne sigurnosne upute

Prije upotrebe ovog alata uvijek pročitajte i razumite sva sigurnosna upozorenja i upute. Nepoštivanje upozorenja i uputa može uzrokovati strujni udar, požar i/ili ozbiljne ozljede.

• Sigurnost radnog područja: Radno mjesto održavajte čistim i dobro osvijetljenim. Nered ili tamna područja mogu uzrokovati nesreće. Ne koristite električne alate u eksplozivnim atmosferama, kao što je prisutnost zapaljivih tekućina, plinova ili prašine.
• Električna sigurnost: Utikači električnog alata moraju odgovarati utičnici. Nikada ne mijenjajte utikač ni na koji način. Ne zloupotrebljavajte kabel. Nikada ne koristite kabel za nošenje, povlačenje ili isključivanje električnog alata. Držite kabel dalje od topline, ulja, oštrih rubova ili pokretnih dijelova.
• Osobna sigurnost: Always wear eye protection. Use hearing protection when operating for extended periods. Dress properly. Do not wear loose clothing or jewelry. Keep your hair, clothing, and gloves away from moving parts.
• Upotreba i njega alata: Ne forsirajte električni alat. Koristite odgovarajući električni alat za svoju primjenu. Isključite utikač iz izvora napajanja prije bilo kakvih podešavanja, promjene pribora ili pohranjivanja električnog alata.
• Wet Grinding Specifics: Ensure the water tank is filled to the appropriate level before operation. Always use the wet grinding feature to prevent overheating of the workpiece and grinding wheel.

Components and Included Parts

The Einhell TC-WG 200 Wet Bench Grinder comes with several key components and accessories to facilitate effective sharpening and polishing.

• Wet Grinding Disc: A slow-running, fine-grained wheel for primary sharpening.
• Leather Honing Wheel: Used for deburring and achieving a polished finish.
• Kutni mjerač: A tool to accurately set and maintain the desired grinding angle.
• Grindstone: For preparing and dressing the wet grinding disc.
• Spremnik za vodu: Integrated corrosion-free tank for cooling the workpiece during wet grinding.
• Tool Rest/Support: Adjustable support for holding tools against the grinding wheel.
• Gumene noge: Four feet designed to dampen vibrations and provide stable operation.

Figure 2: Key accessories included with the grinder, showing the angle gauge, grindstone, and tool rest.

Postavljanje i montaža

1. Raspakiranje: Pažljivo izvadite sve komponente iz pakiranja. Pregledajte ima li oštećenja.
2. Plasman: Place the grinder on a stable, level, and secure workbench or surface. Ensure the four rubber feet are firmly seated to dampen vibrations and provide stability.
   

   Figure 3: The robust rubber feet ensure stable and vibration-dampened operation.

3. Spremnik za vodu: Fill the integrated corrosion-free water tank with clean water up to the indicated maximum level. This water is crucial for cooling the workpiece and preventing overheating during grinding.
   

   Figure 4: The water tank, essential for wet grinding, positioned beneath the grinding wheel.
4. Tool Rest Installation: Attach the tool rest to the designated mounting points on the grinder. Secure it firmly using the provided fasteners. This provides a stable platform for guiding your tools.
   

   Figure 5: Detail of the tool rest mounting mechanism.

5. Priključak za napajanje: Connect the power cord to a suitable 125 Volt AC power outlet. Ensure the power switch is in the "OFF" position before plugging in.

Upute za rad

The Einhell TC-WG 200 is designed for efficient and precise sharpening. Follow these steps for optimal results.

1. Prepare the Grinding Wheel: Before initial use or if the grinding wheel becomes uneven, use the included grindstone to dress and prepare its surface. This ensures a consistent and effective grinding action.
2. Postavite kut: Use the angle gauge to determine and set the correct grinding angle for your tool. Adjust the tool rest accordingly to maintain this angle during grinding.
   

   Figure 6: The angle gauge assists in precise angle setting for various tools.

3. Start the Grinder: Turn on the power switch. The 125 W motor will accelerate the wet sanding wheel to approximately 110 RPM. This slow speed is ideal for fine sanding and prevents overheating.
   

   Figure 7: Visual indicators for the grinder's slow speed and wet operation.

4. Mljevenje: Gently apply the tool to be sharpened against the wet grinding wheel, maintaining the set angle. Move the tool consistently across the wheel's surface. The continuous water supply will keep the tool cool.
   

   Figure 8: Proper technique for sharpening a tool on the wet bench grinder.
5. Honing and Polishing: After grinding, switch to the leather honing wheel to remove any burrs and achieve a finer, polished edge. For an even better finish, apply stripping paste to the leather wheel before honing.
6. Završna obrada: Once the desired sharpness and finish are achieved, turn off the grinder and carefully remove the tool.

Održavanje i njega

Regular maintenance ensures the longevity and optimal performance of your Einhell TC-WG 200 Wet Bench Grinder.

• Spremnik čiste vode: Regularly empty and clean the water tank to prevent algae buildup and ensure a continuous supply of clean cooling water.
• Obrada kotača: Periodically dress the wet grinding wheel with the grindstone to maintain its shape and expose fresh abrasive particles.
• Pregledajte kotače: Check both the wet grinding wheel and the leather honing wheel for wear or damage. Replace them if necessary.
• Generalno čišćenje: After each use, wipe down the exterior of the grinder with a damp cloth to remove any grinding residue. Ensure no water enters electrical components.
• Skladištenje: Brusilicu čuvajte na suhom i čistom mjestu, dalje od izravne sunčeve svjetlosti i ekstremnih temperatura.

Rješavanje problema

This section addresses common issues you might encounter with your wet bench grinder.

Tehničke specifikacije

Figure 9: Visual representation of the grinding and honing wheel dimensions.

Jamstvo i podrška

For detailed warranty information, please refer to the documentation included with your product or visit the official Einhell webstranica. Jamstveni uvjeti obično pokrivaju proizvodne nedostatke za određeno razdoblje od datuma kupnje.

If you encounter any issues or require technical assistance, please contact Einhell customer support. Have your model number (TC-WG 200) and purchase details ready when contacting support.

Kontaktne podatke za podršku često možete pronaći na proizvođačevoj website or in the product packaging. For general inquiries, you may visit the Einhell official webmjesto.