Rigol DS2302A Digital Oscilloscope User Manual

1. Uvod

The Rigol DS2302A is a high-performance digital oscilloscope designed for precise signal analysis and measurement. It features a 300 MHz bandwidth, 2 analog channels, a 2 GSa/s real-time sampling rate, and a deep memory depth of 56 Mpts. This manual provides essential information for setting up, operating, and maintaining your DS2302A oscilloscope.

Slika 1.1: Prednja strana view of the Rigol DS2302A Digital Oscilloscope, showing the display, control panel, and input channels.

2. Ključne značajke

The DS2302A incorporates several advanced features to enhance measurement capabilities and user experience:

• High Bandwidth and Sampling stopa: 300 MHz analog bandwidth and 2 GSa/s real-time sampling rate for capturing fast signals.
• Deep Memory Depth: Up to 56 Mpts memory depth allows for longer waveform captures with high resolution.
• UltraVision Technology: Features like multi-level intensity grading display (up to 256 levels) and real-time ceaseless waveform recording, playback, and analysis functions.
• Napredno okidanje: Supports various trigger types including Edge, Pulse, Runt, Windows, Nth Edge, Slope, Video, Pattern, Delay, Timeout, Duration, Setup/Hold, RS232, I2C, SPI, and CAN.
• Dekodiranje serijske sabirnice: Built-in decoding functions for common serial protocols such as Parallel, RS232, I2C, SPI, and CAN.
• Veliki zaslon: An 8-inch display provides clear viewing of waveforms and measurement data.
• Built-in 50Ω Adapters: Improves signal integrity for higher speed signals.

Figure 2.1: The oscilloscope display demonstrating its wide vertical range (500 µV/div to 10 V/div) and low noise floor, which is beneficial for capturing small signals accurately.

Figure 2.2: Illustration of the UltraVision deep memory feature, allowing for up to 56 Mpts of memory depth on analog channels for extended waveform capture.

Figure 2.3: The oscilloscope's display showcasing the UltraVision technology's high waveform capture rate of up to 52,000 waveforms per second, enabling the observation of transient events.

3. Postavljanje

Follow these steps to set up your Rigol DS2302A oscilloscope:

1. Raspakiranje: Carefully remove the oscilloscope and all accessories from its packaging. Inspect for any signs of damage.
2. Priključak za napajanje: Connect the provided power cable to the power input on the rear panel of the oscilloscope and then to a suitable AC power outlet.
3. Početno uključivanje: Press the power button on the front panel to turn on the oscilloscope. Allow a few moments for the system to boot up.
4. Veza sonde: Connect the oscilloscope probes to the BNC input connectors (CH1, CH2) on the front panel. Ensure a secure connection.
5. Uzemljenje: Always ensure the oscilloscope is properly grounded to prevent electrical shock and ensure accurate measurements.

Figure 3.1: The packaging box for the Rigol DS2302A oscilloscope, indicating proper handling and recycling symbols.

4. Upute za rad

This section covers basic operation and common functions of the DS2302A oscilloscope.

4.1. Basic Waveform Display

• Vertikalne kontrole: Use the vertical position and scale knobs for each channel (CH1, CH2) to adjust the vertical position and voltage per division of the waveform.
• Horizontalne kontrole: Use the horizontal position and scale knobs to adjust the time base and horizontal position of the waveform.
• Automatsko dugme: Pritisnite tipku AUTO button for automatic setup of vertical, horizontal, and trigger systems to display a stable waveform.

4.2. Trigger Functions

The oscilloscope offers various trigger modes to stabilize and capture specific events.

• Okidač na rubu: Okida se na rastućem ili silaznom rubu signala.
• Pulsni okidač: Triggers on pulses of specific width or polarity.
• Serial Bus Triggering: Utilize dedicated trigger types for serial protocols like I2C, SPI, and CAN to isolate specific data packets or events.

Figure 4.1: The oscilloscope's trigger menu, illustrating the wide array of trigger functions available, including Runt, Setup/Hold, and Nth Edge, for precise signal capture.

4.3. Serial Bus Decoding

The DS2302A can decode and display data from various serial buses.

• Accessing Decode: Idite do Dekodirati menu to select the desired protocol (e.g., RS232, I2C, SPI, CAN).
• Konfiguracija: Configure the bus parameters such as clock source, data lines, and bit rates as required by your specific bus.
• Viewing Decoded Data: The decoded data will be displayed on the screen, often in a tabular or packet-based format, alongside the analog waveforms.

Figure 4.2: The oscilloscope's display demonstrating its serial bus trigger and decoding functions for protocols like RS232, I2C, SPI, and CAN, showing both the analog signal and the decoded data.

4.4. Waveform Recording and Analysis

Utilize the UltraVision features for in-depth waveform analysis.

• Snimanje: Access the recording function to capture long durations of waveform data into the deep memory.
• Reprodukcija: Review recorded waveforms frame by frame or continuously to identify anomalies.
• Analiza: Apply various measurement and analysis tools to the recorded data for detailed characterization.

Figure 4.3: The oscilloscope's display showcasing UltraVision's real-time ceaseless waveform recording, playback, and analysis functions, allowing users to capture and examine transient events.

5. Održavanje

Pravilno održavanje osigurava dugotrajnost i točnost vašeg osciloskopa.

• Čišćenje: Za čišćenje vanjske strane instrumenta koristite meku, suhu krpu. Za tvrdokornu prljavštinu, laganoamp Može se koristiti krpa s blagim deterdžentom. Izbjegavajte abrazivna sredstva za čišćenje ili otapala.
• Ventilacija: Ensure the ventilation openings on the instrument are clear and unobstructed to prevent overheating.
• Skladištenje: When not in use, store the oscilloscope in a clean, dry environment away from direct sunlight and extreme temperatures.
• Njega sonde: Handle oscilloscope probes with care. Avoid bending or stressing the probe tips. Store them properly to prevent damage.

6. Rješavanje problema

This section addresses common issues you might encounter with your DS2302A oscilloscope.

7. Specifikacije

Detailed technical specifications for the Rigol DS2302A Digital Oscilloscope:

8. Jamstvo i podrška

For warranty information, technical support, or any further inquiries regarding your Rigol DS2302A Digital Oscilloscope, please contact Rigol directly.

You can also visit the official Rigol North America website for more details and resources: www.rigolna.com