SECULINK 10-Channel 4K NVR User Manual

Uvod

This manual provides comprehensive instructions for the installation, operation, and maintenance of your SECULINK 10-Channel 4K Network Video Recorder (NVR). This NVR is designed to manage and record video footage from compatible IP cameras, offering advanced features such as 4K Ultra HD video support, H.265+ compression, motion detection recording, and remote access capabilities. Please read this manual thoroughly before using the device to ensure proper setup and optimal performance.

Značajke proizvoda

• Ultra HD Video: Supports full 4K video viewing on all 10 channels, compatible with 8MP/5MP/4MP/3MP/1080p ONVIF Conformance IP cameras for crystal clear image capture.
• H.265+ Compression Technology: Enhances bandwidth and storage efficiency, resulting in smaller file sizes, higher definition, and extended recording times. Supports simultaneous network transmission and playback.
• Snimanje detekcije pokreta: Configures the NVR to initiate recording only when motion is detected, optimizing storage space and providing intelligent event-based recording.
• Jednostavno postavljanje: Requires a direct wired Ethernet connection to your router for operation. Simplifies management of all connected IP cameras on your network.
• Više opcija pohrane: Supports up to 6TB HDD (sold separately) and Cloud Storage Service (sold separately). Backup options include USB Flash Disk, USB DVR Writer, and network backup.
• P2P Remote Access: Cloud P2P function enables remote viewing on smartphones, tablets, and PCs via the XMeye App, allowing 24/7 monitoring from any location.

Image: Visual comparison of different video resolutions supported by the NVR, including 720P, 1080P, 4MP, 5MP, and Ultra HD 4K (3840x2160).

Image: Diagram illustrating the storage efficiency of H.265+ compression compared to H.264, showing significant reduction in storage requirements.

Sadržaj paketa

Molimo Vas da prilikom otvaranja paketa provjerite jesu li svi artikli prisutni i u dobrom stanju:

• 1x SECULINK 10-Channel Network Video Recorder (NVR)
• 1x strujni adapter
• 1x USB miš
• Note: Hard drive (HDD) is not included and must be purchased separately.

Proizvod gotovview

Prednja ploča

Slika: Od vrha prema dolje view of the SECULINK NVR showing the front panel with "Power" and "Record" indicators, and a rear view displaying all ports.

The front panel of the NVR typically includes LED indicators for power and recording status. These indicators provide quick visual confirmation of the device's operational state.

• Indikator napajanja: Svijetli kada je NVR uključen.
• Indikator snimanja: Flashes or illuminates to indicate active video recording.

Stražnja ploča

Image: Close-up of the NVR's rear panel, clearly labeling the VGA, HDMI, LAN (RJ45), USB, and DC 12V power input ports.

The rear panel provides all necessary connection ports for the NVR:

• VGA izlaz: Connects to a monitor or display via a VGA cable.
• HDMI izlaz: Connects to a monitor or display via an HDMI cable for high-definition video output.
• LAN (RJ45) priključak: Connects the NVR to your network router using an Ethernet cable.
• USB Ports (2x USB2.0): Used for connecting the included USB mouse, external storage devices for backup, or for firmware updates.
• DC 12V ulaz napajanja: Connects the provided power adapter to supply power to the NVR.
• Audio izlaz (RCA): For connecting to an audio system (if supported by your setup).

Vodič za postavljanje

1. Hard Drive (HDD) Installation (HDD Not Included)

The NVR requires an internal SATA hard drive for video storage. Follow these steps to install a compatible 3.5" SATA HDD (up to 6TB recommended):

1. Twist down the screws of the DVR: Carefully remove the screws securing the NVR's cover.
2. Access the hard disk: Gently slide open the cover to expose the internal components. Connect the SATA data cable and power cable from the NVR to the corresponding ports on the hard drive.
3. Install the screws: Secure the hard drive inside the NVR chassis using the provided screws. Replace the NVR cover and secure it with its screws.

Image: Visual instructions detailing the three steps for HDD installation: unscrewing the cover, connecting the SATA cables, and securing the HDD with screws.

2. Veze sustava

Connect the NVR to your network and display as follows:

• Connect the NVR's LAN port to your router using an Ethernet cable.
• Connect the NVR's HDMI or VGA output to a monitor or TV.
• Spojite USB miš na jedan od USB priključaka NVR-a.
• Connect the power adapter to the NVR's DC 12V input and plug it into a power outlet.

Image: A schematic diagram illustrating the network setup, showing IP cameras wirelessly connecting to a router, which is then wired to the NVR, and the NVR connected to a monitor and mouse.

3. Spajanje kamere

The NVR will automatically detect and add ONVIF-compliant IP cameras connected to the same network. Ensure your IP cameras are powered on and properly configured on your network before attempting to add them to the NVR.

• Access the NVR's interface via the connected monitor and mouse.
• Navigate to the camera management section (refer to the on-screen menu).
• The NVR should list available IP cameras on your network. Select and add them as required.

Upute za rad

Načini snimanja

The NVR offers flexible recording options to suit your surveillance needs:

• Neprekidno snimanje 24/7: Zapisi footage continuously throughout the day and night.
• Snimanje pokreta: The NVR is triggered to record only when motion is detected by the connected cameras. This conserves storage space.
• Zakazano snimanje: Set specific times or days for the NVR to record, allowing for customized recording schedules.

Image: Visual representation of the three primary recording modes: 24/7 Continuous Record, Motion Recording (triggered by movement), and Scheduled Recording (based on a set timetable).

Image: Flowchart demonstrating the motion detection recording process: Standby Mode -> Motion Detection Mode-Record -> Standby Mode again if no motion.

Daljinski Viewing with Mobile App

The SECULINK NVR supports remote viewing via the XMeye Pro mobile application, available for both Android and iOS devices. This allows you to monitor your premises from anywhere with an internet connection.

• Preuzmite XMeye Pro APP from Google Play Store or Apple App Store. You can also scan the QR code provided in the image below or visit http://d.xmeye.net/Xmeye.
• Registrirajte račun i prijavite se.
• Add your NVR device to the app using its unique device ID or by scanning the QR code displayed on the NVR's interface.
• Nakon što ga dodate, možete view prijenosi uživo, reprodukcija snimljene hranetage, and receive motion alerts directly on your mobile device.

Image: Displays the XMeye Pro app interface on a smartphone, tablet, laptop, and desktop, along with QR codes and logos for downloading the app from Google Play and the App Store.

Image: Depicts a security camera detecting motion and an instant alert message being pushed to a mobile device via the XMeye app, showing the time and channel of the detected event.

Održavanje

Hard Drive Management

Regularly check the status of your hard drive through the NVR's system settings to ensure it is functioning correctly. If the hard drive becomes full, the NVR will typically overwrite the oldest footage. You can configure this behavior in the system settings.

Ažuriranja firmvera

Periodically check the SECULINK official website or contact customer support for available firmware updates. Firmware updates can improve system stability, add new features, and enhance security. Follow the provided instructions carefully when performing updates to avoid damaging the device.

Rješavanje problema

Tehnički podaci

Sigurnosne informacije

Molimo vas da se pridržavate sljedećih sigurnosnih mjera opreza kako biste spriječili ozljede ili oštećenje uređaja:

Image: A warning label indicating "CAUTION: RISK OF ELECTRIC SHOCK DO NOT OPEN" and "WARNING: TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK DO NOT EXPOSE THIS APPLIANCE TO RAIN OR MOISTURE." It also states "NO USER SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL."

• Opasnost od električnog udara: Do not open the NVR casing. Unutra nema dijelova koje korisnik može sam servisirati. Za sve servisne radove obratite se kvalificiranom servisnom osoblju.
• Opasnost od požara i strujnog udara: To prevent fire or electric shock, do not expose this appliance to rain or moisture. Do not use units not specifically designed for outdoor use in wet conditions.
• Ventilacija: Ensure adequate ventilation around the NVR to prevent overheating. Do not block ventilation openings.
• Izvor napajanja: Use only the provided power adapter. Ensure the power source matches the voltage requirements of the NVR.
• Čišćenje: Disconnect the NVR from the power source before cleaning. Use a dry cloth for cleaning. Do not use liquid cleaners or aerosol cleaners.

Jamstvo i podrška

For detailed warranty information, please refer to the warranty card included with your product or contact SECULINK customer support. For additional assistance, you may refer to the official User Guide PDF available online:

Preuzmite službeni korisnički priručnik (PDF)

For technical support or inquiries, please visit the SECULINK official website or contact their customer service department. Keep your product model number (NVR1110PF-4K) and purchase information ready when seeking support.