Proizvod gotovview
The Arnott Coil Spring Conversion Kit (C-3420) is designed to replace the original air suspension system in 2013-2018 Ram 1500 (DS) models with a traditional coil spring suspension. This kit provides a reliable and cost-effective alternative to air suspension, engineered for durability and performance.
Ključne značajke
- Specially valved shock absorbers for optimal ride quality.
- CNC-machined aluminum seats ensure precise fitment and durability.
- US-made powder-coated steel coil springs for corrosion resistance and longevity.
- Engineered in the USA to meet high quality standards.
Uključene komponente
This kit typically includes the following components:
- Coil Spring Conversion Kit - 13-18 Ram 1500 (DS)
- Electronic Bypass Module (EBM)
- Potreban hardver za ugradnju
Image: Complete Arnott Coil Spring Conversion Kit showing all major components.
Image: Close-up of two Arnott coil springs and associated bump stops.
Vodič za instalaciju
Installation of the Arnott Coil Spring Conversion Kit should be performed by a qualified technician or an individual with experience in automotive suspension systems. Always refer to the detailed step-by-step instructions provided with your kit for precise procedures and torque specifications.
Opće sigurnosne mjere
- Uvijek nosite odgovarajuću osobnu zaštitnu opremu (OZO), uključujući zaštitne naočale i rukavice.
- Prije početka bilo kakvog rada provjerite je li vozilo sigurno poduprto dizalicom ili postoljima.
- Prije rada na električnim komponentama isključite akumulator vozila.
- Ne radite ispod vozila koje je poduprto samo dizalicom.
Koraci prije instalacije
- Parkirajte vozilo na ravnoj površini.
- Podignite vozilo i uklonite kotače.
- Carefully depressurize and remove the existing air suspension components according to the vehicle manufacturer's service manual.
Instalacijski postupak
The Arnott Coil Spring Conversion Kit is designed for easy installation without modifications to the vehicle. The general steps involve:
- Install the new coil spring assemblies into the designated mounting points.
- Pričvrstite sve pričvrsne elemente zateznim momentom koji je propisao proizvođač.
- Install the Electronic Bypass Module (EBM) as per the specific wiring instructions.
- Vratite kotače i spustite vozilo.
Electronic Bypass Module (EBM) Installation
The Arnott exclusive Electronic Bypass Module (U.S. Pat. No. 9,329,917) is a critical component designed to eliminate suspension dashboard warning lights that would otherwise appear after converting from air suspension. It includes complete step-by-step instructions and wiring information to make installation quick and easy. The EBM turns off suspension dashboard warning lights and is a patented design.
Image: The Electronic Bypass Module (EBM) and its wiring, essential for preventing dashboard warning lights.
Image: Visual representation of the EBM's function in managing dashboard warning lights.
Operacija
After successful installation, your vehicle's suspension will operate with traditional coil springs, providing a consistent ride height and handling characteristics similar to a standard coil spring equipped vehicle. The conversion kit is designed to restore the vehicle's ride and handling to factory specifications, ensuring a comfortable and stable driving experience.
Image: The conversion kit aims to provide a ride quality comparable to a new vehicle.
Održavanje
The Arnott Coil Spring Conversion Kit is designed for minimal maintenance. Regular vehicle inspections should include checking the suspension components for any signs of wear, damage, or loose fasteners. It is recommended to:
- Periodically inspect coil springs for cracks or corrosion.
- Check shock absorbers for leaks or damage.
- Ensure all mounting bolts are properly torqued during routine vehicle service.
Rješavanje problema
Most issues after installing the conversion kit are related to the electronic bypass module or incorrect installation.
Dashboard Warning Lights
If suspension-related warning lights appear on the dashboard after installation, verify the following:
- Ensure the Electronic Bypass Module (EBM) is correctly wired and connected according to the provided instructions.
- Check all electrical connections to the EBM for looseness or corrosion.
- Confirm that the vehicle's battery was disconnected during EBM installation and reconnected properly.
The EBM is specifically designed to prevent these warning lights. If issues persist, consult the detailed wiring diagram in your kit or contact Arnott customer support.
Unusual Noises or Ride Quality Issues
If you experience unusual noises (e.g., clunking, squeaking) or an unsatisfactory ride quality:
- Re-check all mounting points and fasteners to ensure they are properly torqued.
- Inspect the coil springs and shock absorbers for any signs of damage or improper seating.
- Ensure no components are interfering with other parts of the vehicle's chassis or suspension.
Tehnički podaci
| Atribut | Vrijednost |
|---|---|
| Dimenzije paketa artikla D x Š x V | 26 x 15.5 x 14 inča |
| Težina paketa | 37.38 kilogram |
| Dimenzije artikla DxŠxV | 27 x 16 x 14 inča |
| Naziv marke | Arnott |
| Naziv modela | C-3420 |
| Boja | Standard |
| Materijal | Plastic (referring to EBM, main components are metal) |
| Broj stavki | 1 (kit) |
| Proizvođač | Arnott |
| Broj dijela | C-3420 |
| Uključene komponente | Coil Spring Conversion Kit - 13-18 Ram 1500 (DS) |
| Veličina | velika |
Informacije o jamstvu
This Arnott product is covered by a Manufacturer Warranty. For specific details regarding the warranty period, coverage, and claims process, please refer to the warranty documentation included with your product or visit the official Arnott webmjesto.
Korisnička podrška
For technical assistance, installation questions, or warranty inquiries, please contact Arnott customer support. Arnott provides professional, multilingual customer service to assist you with your product.
Please have your product model number (C-3420) and purchase information ready when contacting support.
