be quiet! Pure Rock 2 FX CPU Cooler Instruction Manual

1. Uvod

The be quiet! Pure Rock 2 FX CPU Cooler (Model: BK033) is designed to provide high cooling efficiency and quiet operation for multimedia and gaming systems. It features vibrant ARGB illumination and is compatible with a wide range of Intel and AMD sockets.

Image: The be quiet! Pure Rock 2 FX CPU Cooler featuring its illuminated ARGB fan and black heatsink design.

2. Sadržaj paketa

Prije početka instalacije provjerite jesu li sve komponente prisutne:

• be quiet! Pure Rock 2 FX CPU Cooler
• Light Wings 120mm PWM high-speed fan
• Mounting brackets for Intel (1700 / 1200 / 2066 / 1150 / 1151 / 1155 / 2011-3 Square ILM)
• Mounting brackets for AMD (AM5 / AM4)
• Termalna pasta
• Priručnik za montažu

Slika: Potpuni krajview of all parts included in the be quiet! Pure Rock 2 FX CPU Cooler package, including the heatsink, fan, mounting hardware, and manual.

3. Specifikacije

4. Instalacija

The installation process varies slightly depending on your CPU socket type (AMD or Intel). Please follow the instructions carefully for your specific platform.

4.1. Opća priprema

• Provjerite je li vaš sustav isključen i odspojen.
• Remove your existing CPU cooler.
• Clean any old thermal paste from your CPU's integrated heat spreader (IHS) using isopropyl alcohol and a lint-free cloth.

4.2. AMD AM4 / AM5 Installation

For AMD AM4/AM5 sockets, the existing motherboard backplate is utilized. Remove the plastic retention brackets around the CPU socket, but keep the metal backplate attached to the motherboard.

1. Install the four plastic standoffs onto the motherboard's CPU socket holes.
2. Place the two metal AM4/AM5 brackets onto the plastic standoffs, ensuring correct orientation.
3. Secure the metal brackets with the four provided AM4/AM5 screws. Tighten them evenly in a cross pattern until snug.
4. Apply a small amount of thermal paste to the center of your CPU's IHS.
5. Remove the protective film from the heatsink base.
6. Pažljivo postavite hladnjak na procesor, poravnavajući matice za montažu s vijcima na nosačima.
7. Using the provided screwdriver, tighten the mounting nuts evenly in a cross pattern until the heatsink is securely mounted.
8. Attach the Light Wings 120mm fan to the heatsink using the included fan clips. Ensure the fan is oriented to push air through the heatsink towards the rear of the case.
9. Spojite 4-pinski PWM kabel ventilatora na CPU_FAN priključak na matičnoj ploči.
10. Connect the 3-pin ARGB cable to a compatible 5V ARGB header on your motherboard.

4.3. Intel LGA 1700 / 1200 / 115x Installation

For Intel sockets, you will use the provided Intel backplate and mounting hardware.

1. Adjust the mounting hole position on the Intel backplate to match your CPU socket (e.g., LGA 1700).
2. Place the Intel backplate on the backside of your motherboard, aligning the holes with the CPU socket.
3. Install the four plastic standoffs onto the motherboard's CPU socket holes, screwing them into the backplate.
4. Place the two metal Intel brackets onto the plastic standoffs, ensuring correct orientation.
5. Secure the metal brackets with the four provided Intel screws. Tighten them evenly in a cross pattern until snug.
6. Apply a small amount of thermal paste to the center of your CPU's IHS.
7. Remove the protective film from the heatsink base.
8. Pažljivo postavite hladnjak na procesor, poravnavajući matice za montažu s vijcima na nosačima.
9. Using the provided screwdriver, tighten the mounting nuts evenly in a cross pattern until the heatsink is securely mounted.
10. Attach the Light Wings 120mm fan to the heatsink using the included fan clips. Ensure the fan is oriented to push air through the heatsink towards the rear of the case.
11. Spojite 4-pinski PWM kabel ventilatora na CPU_FAN priključak na matičnoj ploči.
12. Connect the 3-pin ARGB cable to a compatible 5V ARGB header on your motherboard.

5. Upute za rad

5.1. Kontrola ventilatora

The Light Wings 120mm PWM fan is connected to your motherboard's CPU_FAN header. Fan speed can be controlled via your motherboard's BIOS/UEFI settings or through compatible software provided by your motherboard manufacturer. It is recommended to set a fan curve that balances cooling performance with noise levels.

5.2. ARGB upravljanje rasvjetom

The ARGB lighting of the Light Wings fan is controlled via your motherboard's 5V ARGB header. Use your motherboard's RGB software (e.g., ASUS Aura Sync, MSI Mystic Light, Gigabyte RGB Fusion, ASRock Polychrome Sync) to customize lighting effects, colors, and synchronization with other ARGB components.

6. Održavanje

Redovito održavanje osigurava optimalne performanse i dugotrajnost vašeg CPU hladnjaka.

• Uklanjanje prašine: Povremeno čistite prašinu s rebara hladnjaka i lopatica ventilatora komprimiranim zrakom ili mekom četkom. Pazite da se ventilator ne okreće tijekom čišćenja.
• Inspekcija ventilatora: Check the fan for any signs of wear, damage, or excessive noise. Replace the fan if necessary.
• Termalna pasta: While not frequently required, if you remove the heatsink for any reason, clean off the old thermal paste and apply a fresh layer before reinstallation.

7. Rješavanje problema

Ako imate problema s hladnjakom procesora, pogledajte sljedeća uobičajena rješenja:

• Visoke temperature procesora:
  • Provjerite je li hladnjak sigurno montiran i da ima dobar kontakt s procesorom.
  • Provjerite je li termalna pasta nanesena ispravno i ravnomjerno.
  • Check fan speed settings in BIOS/UEFI; ensure the fan is spinning at an appropriate speed.
  • Očistite nakupljenu prašinu s rebara hladnjaka i lopatica ventilatora.
  • Osigurajte dovoljan protok zraka unutar kućišta računala.
• Ventilator se ne okreće/Nema ARGB osvjetljenja:
  • Check that the 4-pin PWM fan cable is securely connected to the CPU_FAN header.
  • Verify that the 3-pin ARGB cable is securely connected to a compatible 5V ARGB header.
  • Ensure ARGB lighting is enabled and configured correctly in your motherboard's software/BIOS.
  • Inspect cables for any damage.
• Prekomjerna buka ventilatora:
  • Podesite brzinu ventilatora u BIOS-u/UEFI-ju na niže okretaje ako to temperature dopuštaju.
  • Check for any obstructions or loose cables hitting the fan blades.
  • Provjerite je li ventilator sigurno montiran i da ne vibrira.

8. Jamstvo i podrška

be quiet! products are covered by a manufacturer's warranty. For specific warranty terms and conditions, please refer to the warranty card included in your package or visit the official be quiet! website. For technical support, product registration, or further assistance, please visit the budi tih! Kupuj na Amazonu ili njihove službene kanale podrške.