MONDAWE 12-Inch Thermostatic Ceiling Mounted Shower System

1. Uvod

Thank you for choosing the MONDAWE 12-Inch Thermostatic Ceiling Mounted Shower System. This manual provides essential information for the safe installation, operation, and maintenance of your new shower system. Please read it thoroughly before installation and keep it for future reference.

Ključne karakteristike:

• Thermostatic Anti-Scald Valve: Equipped with a thermostatic shower valve that can be locked at 38°C (100°F) to prevent scalding from sudden water pressure changes.
• Rotating Body Jets: Features 6 spa body jets that rotate 360 degrees for a full-range massage experience.
• 3-Function Shower Faucet Set: Effortlessly switch between rainfall shower head, body jets, or handheld spray. All functions can be used separately or simultaneously.
• Materijali vrhunske kvalitete: Valve body, handheld holder, and body jets are made of solid brass. Shower head, shower arm, handheld shower, and shower hose are made of 304 stainless steel.
• Jednostavna instalacija: Adopts American standard 1/2 inch NPT thread, compatible with most standard U.S. plumbing connections.

2. What's in the Package

Prije nastavka instalacije provjerite jesu li sve komponente prisutne i neoštećene.

Image: All components of the MONDAWE 12-Inch Thermostatic Shower System laid out, including the shower head, body jets, control panel, handheld shower, hoses, and mounting hardware.

1. 12-Inch Shower Head
2. 6 pcs Massage Body Jets
3. Poklopac, pokrovna ploča
4. Ručni tuš
5. Tijelo termostatskog ventila
6. Valve Panel
7. Handheld Shower Holder
8. 59-Inch Shower Hose
9. Ruka za tuširanje
10. Hardver za montažu
11. korisnički priručnik

3. Specifikacije

4. Sigurnosne informacije

• Uvijek isključite glavni dovod vode prije početka bilo kakve instalacije ili održavanja.
• Ako niste sigurni u bilo koji dio postupka instalacije, obratite se kvalificiranom vodoinstalateru.
• The thermostatic valve is designed to prevent scalding by maintaining a consistent water temperature. Do not tamper with the factory-set temperature limit of 38°C (100°F) unless you fully understand the risks.
• Provjerite jesu li svi spojevi sigurni i vodonepropusni kako biste spriječili curenje.
• Nosite odgovarajuću osobnu zaštitnu opremu (OZO) tijekom instalacije.

5. Vodič za instalaciju

Proper installation is crucial for the optimal performance and longevity of your MONDAWE shower system. Follow these steps carefully.

5.1 Razmatranja prije instalacije

• Ensure your wall structure can support the weight of the shower system.
• Verify that your plumbing connections are 1/2 inch NPT standard.
• The installation depth of the main body and shower components must be within specified limits relative to the finished wall line. Refer to the diagrams below.

Image: Recommended height dimensions for shower components.

Image: Installation depth requirements for shower arm, holder, and body jets.

5.2 Vodič za instalaciju videa

For a visual step-by-step guide, please watch the official installation video provided by MONDAWE:

5.3 Opći koraci instalacije:

1. Pripremite zid: Ensure the wall framing is ready for the main valve body and other components. Mark precise locations for the shower head, body jets, and handheld shower holder according to your desired layout and the provided diagrams.
2. Install Main Valve Body: Secure the thermostatic valve body within the wall, ensuring it is properly aligned and at the correct depth relative to the finished wall surface. Connect the hot and cold water inlets (NPT 1/2") and outlets for the shower head, handheld, and body jets.
3. Connect Piping: Run the necessary plumbing lines from the main valve body to the locations of the shower head, handheld shower holder, and body jets. Use appropriate NPT 1/2" fittings and ensure all connections are sealed with Teflon tape for a watertight fit.
4. Install Shower Head and Arm: Mount the ceiling-mounted shower arm securely to the ceiling structure. Connect the 12-inch shower head to the arm.
5. Install Body Jets: Install the 6 solid brass body jets into their designated wall openings. Ensure they are flush with the finished wall.
6. Install Handheld Shower Holder and Hose: Mount the handheld shower holder to the wall. Connect the 59-inch stainless steel shower hose to the handheld shower and the wall outlet.
7. Ispitivanje vode: Before closing the wall, perform a thorough water test. Turn on the main water supply and check all connections for leaks. Operate each function (shower head, handheld, body jets) to ensure proper flow and temperature control.
8. Install Control Panel and Trim: Once water testing is complete and no leaks are found, install the decorative valve panel and handles onto the main valve body. Install the covers for the body jets and handheld holder.

6. Upute za rad

Your MONDAWE shower system offers versatile control over your showering experience.

6.1 Kontrola temperature:

• The bottom knob on the control panel is for temperature adjustment. Rotate it to select your desired water temperature.
• The thermostatic valve is factory-set with a safety stop at 38°C (100°F) to prevent accidental scalding. To exceed this temperature, press the safety button and continue rotating the knob.

6.2 Function Selection:

The upper knobs on the control panel allow you to select and activate different shower functions:

• Each knob corresponds to a specific shower outlet (e.g., rainfall shower head, handheld shower, body jets).
• Turn a knob to the 'ON' position to activate the corresponding function.
• You can use individual functions or combine them for a customized experience.

6.3 Body Jet Adjustment:

• The 6 body jets feature 360-degree rotation. Adjust their direction to target specific areas for a personalized massage.

6.4 Videozapis demonstracije proizvoda:

See the shower system in action and understand its various functions:

7. Održavanje

Regular cleaning and maintenance will ensure your MONDAWE shower system remains in excellent condition and functions optimally.

7.1 Cleaning the Chrome Finish:

• Use a soft cloth and mild soap or a non-abrasive cleaner specifically designed for chrome finishes.
• Izbjegavajte abrazivna sredstva za čišćenje, abrazivne spužvice ili jake kemikalije jer mogu oštetiti završnu obradu.
• Temeljito isperite čistom vodom i osušite mekom krpom kako biste spriječili mrlje od vode.

7.2 Cleaning Shower Head and Body Jet Nozzles:

• Over time, mineral deposits can build up in the nozzles, affecting water flow.
• Many nozzles are made of rubber and can be easily cleaned by gently rubbing them with your finger or a soft brush to dislodge deposits.
• For stubborn buildup, a solution of white vinegar and water can be used. Soak the affected parts (if removable) or apply the solution with a cloth, then rinse thoroughly.

8. Rješavanje problema

If you encounter any issues with your shower system, refer to the following common problems and solutions:

If you are unable to resolve an issue using these troubleshooting steps, please contact MONDAWE customer support for assistance.

9. Jamstvo i podrška

MONDAWE is committed to providing high-quality products and excellent customer service. Your shower system is manufactured with durable materials to ensure longevity.

Korisnička podrška:

If you have any questions regarding installation, operation, maintenance, or require assistance with your product, please do not hesitate to contact us. Our customer service team is ready to help.

You can reach us via email at the address provided in your purchase documentation or visit the MONDAWE store on Amazon for more information and support resources.

Image: MONDAWE Brand Logo