HYCHIKA 3.6V Cordless Electric Rechargeable Screwdriver Drill Set User Manual

1. Uvod

This user manual provides essential information for the safe and efficient operation of your HYCHIKA 3.6V Cordless Electric Rechargeable Screwdriver Drill Set. Please read this manual thoroughly before first use and keep it for future reference.

The HYCHIKA 3.6V Cordless Electric Screwdriver is designed for various screwing and light drilling tasks around the home. It features a maximum torque of 6 N-m, a 6.35 mm quick-change chuck, and a versatile design that allows for both pistol and straight grip configurations.

2. Sigurnosne upute

Uvijek se pridržavajte osnovnih sigurnosnih mjera opreza pri korištenju električnih alata kako biste smanjili rizik od požara, strujnog udara i tjelesnih ozljeda.

• Sigurnost radnog područja: Radno mjesto održavajte čistim i dobro osvijetljenim. Nered ili tamna područja mogu uzrokovati nesreće. Ne koristite električne alate u eksplozivnim atmosferama, kao što je prisutnost zapaljivih tekućina, plinova ili prašine.
• Električna sigurnost: Izbjegavajte kontakt tijela s uzemljenim površinama kao što su cijevi, radijatori, štednjaci i hladnjaci. Ne izlažite električne alate kiši ili vlazi.
• Osobna sigurnost: Always wear eye protection. Use safety glasses, goggles, or a face shield. Wear hearing protection when operating noisy tools. Dress properly; avoid loose clothing or jewelry.
• Upotreba i njega alata: Ne forsirajte električni alat. Koristite odgovarajući električni alat za svoju primjenu. Isključite utikač iz izvora napajanja i/ili izvadite bateriju prije bilo kakvih podešavanja, promjene pribora ili pohranjivanja električnog alata.
• Korištenje i održavanje baterijskog paketa: Punite samo punjačem koji je odredio proizvođač. Ne koristite baterije s drugim električnim alatima. Kada se baterija ne koristi, držite je podalje od drugih metalnih predmeta.

3. Sadržaj paketa

Provjerite jesu li svi dolje navedeni artikli uključeni u vaš paket. Ako neki artikli nedostaju ili su oštećeni, obratite se korisničkoj podršci.

• 1 x HYCHIKA 3.6V Cordless Screwdriver
• 19 x odvijač Bits
• 1 x produžna traka
• 1 x adapter za punjenje
• 1 x korisnički priručnik

Figure 3.1: Contents of the HYCHIKA 3.6V Cordless Screwdriver package, including the screwdriver, various bits, and charging adapter.

4. Značajke i komponente proizvoda

Familiarize yourself with the different parts of your cordless screwdriver.

Figure 4.1: Key components of the screwdriver, including the magnetic chuck, PUSH button, front LED light, On/Off switch, LED charger indicator, 3.5mm charger port, and forward & reverse button.

• Magnetska stezna glava: 1/4 inch (6.35mm) quick-change chuck for easy bit installation and removal.
• Prednje LED svjetlo: Illuminates the work area for improved visibility in dark environments.
• Prekidač za uključivanje/isključivanje: Activates and deactivates the screwdriver.
• Forward & Reverse Button: Controls the rotation direction for screwing and unscrewing.
• LED Charger Indicator: Provides status of battery charging.
• 3.5mm Charger Port: Connection point for the charging adapter.
• Gumb PUSH: Used to adjust the grip configuration from pistol to straight.

5. Postavljanje

5.1 Punjenje baterije

The screwdriver is powered by a 3.6V 2000 mAh Lithium-Ion battery. Before first use, fully charge the battery.

1. Connect the charging adapter to the 3.5mm charger port on the screwdriver.
2. Plug the charging adapter into a standard electrical outlet.
3. The LED charger indicator will illuminate during charging. Once fully charged, the indicator may change color or turn off depending on the model.
4. Isključite punjač nakon što je punjenje završeno.

Figure 5.1: The screwdriver connected to its charging adapter, indicating a full charge.

The screwdriver is designed to maintain full power output even when the battery is low, ensuring consistent performance until the battery is depleted.

5.2 Ugradnja bitova odvijača

The screwdriver features a 1/4 inch (6.35mm) magnetic quick-change chuck for easy bit installation.

1. Odaberite odgovarajući bit odvijača za svoj zadatak.
2. Insert the bit into the magnetic chuck until it is securely seated. The magnetic chuck will hold the bit firmly in place.
3. To remove a bit, simply pull it out of the chuck. Bits with grooves are designed for easier removal.

Figure 5.2: Visual guide for inserting a bit into the magnetic chuck and removing it.

6. Upute za rad

6.1 Adjusting Grip Configuration

The screwdriver can be used in two grip configurations: pistol grip or straight grip, for enhanced versatility and comfort.

1. To change the grip, press and hold the "PUSH" button located at the top of the screwdriver.
2. While holding the button, rotate the handle ninety degrees to switch between pistol and straight configurations.
3. Release the "PUSH" button once the desired configuration is achieved. The handle will lock into place.

Figure 6.1: Demonstrates the process of transforming the screwdriver's grip by pressing the PUSH button and rotating the handle.

6.2 Rad naprijed i natrag

The forward/reverse button controls the direction of rotation for screwing and unscrewing.

• To drive screws (forward rotation), push the forward/reverse button to the left (when viewed sa stražnje strane alata).
• To remove screws (reverse rotation), push the forward/reverse button to the right.
• When the button is in the center position, the tool is locked, preventing accidental activation.

6.3 Korištenje LED radnog svjetla

The built-in LED light automatically illuminates when the screwdriver is in operation, providing visibility in dimly lit areas.

Figure 6.2: The integrated LED light provides clear illumination for working in dark environments.

7. Održavanje

Regular maintenance ensures the longevity and optimal performance of your screwdriver.

• Čišćenje: Održavajte ventilacijske otvore čistima i bez prašine. Koristite meku,amp krpa za čišćenje alata casing. Nemojte koristiti jake kemikalije ili abrazivna sredstva za čišćenje.
• Briga o bitovima: Clean screwdriver bits after use. Store them in the provided case to prevent loss and damage.
• Skladištenje baterije: If storing the tool for an extended period, ensure the battery is partially charged (around 50%) and store it in a cool, dry place. Recharge the battery every 3-6 months to maintain its health.
• Opća inspekcija: Periodically check for any loose screws, damaged cords, or worn parts. Do not use the tool if any damage is observed.

8. Rješavanje problema

This section addresses common issues you might encounter with your screwdriver.

Ako problem i dalje postoji nakon isprobavanja ovih rješenja, obratite se korisničkoj podršci.

9. Specifikacije

10. Jamstvo i podrška

Overstock offers lifetime after-sales service for this product. For any questions, concerns, or technical assistance, please contact our customer support team.

Please have your model number (c131a012-0da9-4306-aeab-b1d9ff5cd4b7) and purchase information ready when contacting support.