Tera HW0015

Tera HW0015 bežični skener barkodova Korisnički priručnik

Model: HW0015

1. Uvod

This manual provides detailed instructions for the setup, operation, and maintenance of your Tera HW0015 Wireless Barcode Scanner. This device is designed for efficient and accurate scanning of 1D, 2D, and QR codes across various surfaces and conditions, offering flexible connectivity options and user-friendly features.

Tera HW0015 Wireless Barcode Scanner and Charging Cradle

Figure 1: Tera HW0015 Wireless Barcode Scanner with its charging cradle.

2. Sadržaj paketa

Provjerite jesu li svi artikli prisutni u paketu:

Contents of the Tera HW0015 package

Figure 2: Visual representation of the items included in the product package.

3. Značajke proizvoda

Tera HW0015 scanner compatible with various operating systems and devices

Figure 3: The scanner demonstrates wide compatibility with different devices and operating systems.

4. Postavljanje

4.1 Punjenje skenera

  1. Connect the charging cable to the charging dock and a power source.
  2. Place the scanner onto the charging dock. Ensure proper alignment for charging.
  3. The scanner's screen will indicate charging status. A full charge typically takes several hours.

4.2 Uključivanje/isključivanje

Locate the physical power switch key on the scanner. Push the switch key to the 'ON' position to power on the device. Push it to the 'OFF' position to power off and conserve battery.

Tera HW0015 scanner with physical power switch and battery indicator

Figure 4: The physical power switch and battery capacity of the scanner.

5. Upute za rad

5.1 Osnovno skeniranje

  1. Ensure the scanner is powered on and connected to your host device (see Section 6 for connectivity).
  2. Usmjerite prozor skenera prema barkodu koji želite skenirati.
  3. Press the trigger button. A scan line or light will appear.
  4. Hold steady until a successful scan is indicated by an audible beep, vibration, or visual confirmation on the screen.

5.2 Screen Navigation and Settings

The integrated screen and keypad allow for direct configuration. Use the navigation buttons (Up, Down, OK, Back) to browse menus and adjust settings. The screen displays current time, battery level, connection mode, barcode data, total stored barcodes, and total amount.

Tera HW0015 scanner screen showing connection settings and data

Figure 5: The scanner's screen interface for settings and data display.

Video 1: Demonstrates the Tera HW0015 Scanner's digital screen and physical power switch functionality.

6. Povezivost

The Tera HW0015 offers multiple connectivity options:

Tera HW0015 scanner showing 2.4G wireless and Bluetooth connection options

Figure 6: Illustration of the 2.4G wireless and Bluetooth connectivity options.

7. Scanning Modes

The scanner supports various operational modes to suit different scanning needs:

Tera HW0015 scanner in Manual-Trigger mode

Figure 7: The scanner being used in Manual-Trigger mode.

Tera HW0015 scanner in Continuous Scan mode on a conveyor belt

Figure 8: The scanner operating in Continuous Scan mode for multiple items.

Tera HW0015 scanner in Auto-Sense mode on a desk

Figure 9: The scanner in Auto-Sense mode, automatically scanning items.

8. Održavanje

Tera HW0015 scanner demonstrating durability with drop test and IP ratings

Figure 10: The scanner's durability features, including drop test and IP ratings.

9. Rješavanje problema

ProblemMogući uzrokOtopina
Skener se ne uključuje.Slaba baterija; Isključeno napajanje.Charge the scanner; Ensure the physical power switch is in the 'ON' position.
Nije moguće povezivanje putem Bluetootha.Incorrect pairing mode; Host device Bluetooth off; No pairing barcode scanned.Ensure Bluetooth is enabled on your device. Navigate to 'Connection' on the scanner screen and select 'Bluetooth'. Scan the appropriate pairing barcode from the full user manual if required for your specific Bluetooth profile (HID, SPP, BLE).
Cannot connect via 2.4G wireless.Dongle not inserted; Dongle not recognized.Ensure the 2.4G USB dongle is securely inserted into your host device. Try a different USB port.
Skener ne čita barkodove.Barcode damaged/unreadable; Incorrect scanning mode; Scanning window dirty.Ensure the barcode is clear and undamaged. Check the scanner's screen to confirm the correct scanning mode is active. Clean the scanning window.
Nema prijenosa podataka na glavni uređaj.Connection lost; Incorrect interface mode.Verify the connection status on the scanner's screen. Re-establish the connection if necessary. Ensure the scanner is set to the correct interface mode (e.g., HID for keyboard emulation).

10. Specifikacije

ZnačajkaDetalj
ModelHW0015
Dimenzije3.3 x 4.7 x 7.08 inča
Težina1.08 funti
Povezivost2.4G bežični, Bluetooth, USB kabel
Izvor napajanjaNapajanje baterijom (2600 mAh)
Kompatibilni uređajiStolno računalo, prijenosno računalo, pametni telefon, tablet
Supported 1D CodesUPC-A, UPC-E, EAN-8, EAN-13, Code 128, Code 39, Code 93, Code 11, Interleaved 2 of 5, Matrix 2 of 5, Standard 2 of 5, Coda bar, MSI Plessey, RSS
Supported 2D CodesQR code, Data Matrix, PDF417, Aztec, Maxicode, Micro QR
Memorija16MB (stores over 100,000 barcodes)
IzdržljivostIK08, IP54, 6.6ft (2m) drop test passed

11. Jamstvo i podrška

Tera products are designed for reliability and performance. For warranty information, technical support, or service inquiries, please refer to the contact details provided with your purchase documentation or visit the official Tera webMolimo sačuvajte dokaz o kupnji za potrebe jamstva.

Manufacturer: Tera

Povezani dokumenti - HW0015

prijeview Tera 9100 1D/2D žičani stolni skener barkodova - korisnički priručnik
Ovaj korisnički priručnik pruža sveobuhvatne upute za Tera 9100 1D/2D žičani stolni skener barkodova, pokrivajući postavljanje, konfiguraciju, rad i napredne značajke.
prijeview Tera 8100Y žični skener barkodova - korisnički priručnik
Službeni korisnički priručnik za Tera 8100Y 1D/2D skener barkodova s ​​kabelom za površinsko snimanje. Pruža detaljne upute o postavljanju, konfiguraciji, komunikaciji, uređivanju podataka i podržanim simbologijama. Dostupan na više jezika.
prijeview Tera 5100E bežični/žični 1D laserski skener barkodova - korisnički priručnik
Ovaj korisnički priručnik pruža sveobuhvatne upute i specifikacije za bežični/žični 1D laserski skener barkodova Tera 5100E, koje obuhvaćaju postavljanje, konfiguraciju i rad.
prijeview Tera 6900 1D skener barkodova - korisnički priručnik - konfiguracija i rad
Detaljan korisnički priručnik za skener barkodova Tera 6900 1D. Obuhvaća postavljanje, načine skeniranja, glasnoću, melodiju, USB postavke, konfiguraciju simbologije, umetanje prefiksa/sufiksa, umetanje niza, skrivanje podataka, terminatore, ASCII tablicu i rješavanje problema.
prijeview Tera HW0010 bežični 2D mini skener barkodova - korisnički priručnik
Ovaj korisnički priručnik pruža sveobuhvatne upute za Tera HW0010 bežični 2D mini skener barkodova, koje obuhvaćaju postavljanje, rad, načine komunikacije (2.4G, Bluetooth) i detaljne postavke konfiguracije za učinkovito snimanje podataka.
prijeview Tera D5100 bežični 2D skener crtičnog koda korisnički priručnik
Sveobuhvatni korisnički priručnik za bežični 2D skener barkodova Tera D5100, s detaljnim opisom postavljanja, načina rada, konfiguracije i resursa podrške.