1. Uvod
This manual provides essential information for the safe and efficient operation, maintenance, and troubleshooting of your Einhell TP-ET 18 Li BL-Solo 18V Cordless Compact Router. Please read these instructions carefully before using the tool and keep them for future reference.
The Einhell TP-ET 18 Li BL-Solo is a versatile cordless compact router designed for precision woodworking tasks such as edge milling, grooving, and decorative profiling. It features a powerful brushless motor for extended runtime and performance, electronic speed control, and a continuously adjustable milling depth.
2. Opće sigurnosne upute
UPOZORENJE: Pročitajte sva sigurnosna upozorenja, upute, ilustracije i specifikacije isporučene s ovim električnim alatom. Nepoštivanje svih dolje navedenih uputa može dovesti do strujnog udara, požara i/ili ozbiljne ozljede.
2.1 Sigurnost radnog područja
- Održavajte radni prostor čistim i dobro osvijetljenim. Neuredna ili tamna područja izazivaju nezgode.
- Nemojte raditi s električnim alatima u eksplozivnim atmosferama, poput prisutnosti zapaljivih tekućina, plinova ili prašine. Električni alati stvaraju iskre koje mogu zapaliti prašinu ili pare.
- Držite djecu i promatrače podalje dok radite s električnim alatom. Smetnje mogu uzrokovati gubitak kontrole.
2.2 Električna sigurnost
- Utikač električnog alata mora odgovarati utičnici. Nikada ni na koji način ne mijenjajte utikač.
- Izbjegavajte kontakt tijela s uzemljenim površinama, kao što su cijevi, radijatori, štednjaci i hladnjaci. Postoji povećan rizik od strujnog udara ako je vaše tijelo uzemljeno.
- Ne izlažite električne alate kiši ili vlažnim uvjetima. Ulazak vode u električni alat povećava rizik od strujnog udara.
2.3 Osobna sigurnost
- Uvijek nosite zaštitu za oči. Koristite zaštitne naočale, zaštitne naočale ili vizir za lice.
- Nosite zaštitu za sluh prilikom duljeg rada s električnim alatima.
- Odjenite se kako treba. Ne nosite široku odjeću ili nakit. Držite kosu i odjeću dalje od pokretnih dijelova.
- Budite oprezni, pazite što radite i koristite zdrav razum kada radite s električnim alatom.
- Ne forsirajte električni alat. Koristite ispravan električni alat za svoju primjenu.
- Odvojite bateriju od električnog alata prije bilo kakvih podešavanja, promjene pribora ili spremanja električnih alata.
- Čuvajte neiskorištene električne alate izvan dohvata djece i ne dopustite osobama koje nisu upoznate s električnim alatom ili ovim uputama da rade s električnim alatom.
- Održavajte električne alate i pribor. Provjerite neusklađenost ili zaglavljivanje pokretnih dijelova, lomljenje dijelova i bilo koja druga stanja koja mogu utjecati na rad električnog alata.
3. Komponente i sadržaj paketa
Your Einhell TP-ET 18 Li BL-Solo Cordless Compact Router package includes the following items:
- Einhell TP-ET 18 Li BL-Solo Compact Router (Tool Only)
- 2 x Collets (6mm and 8mm)
- Edge Milling Attachment
- 2 x Spanner Wrenches
- Copy Sleeve
- Suction Adapter
- Paralelno zaustavljanje
- Compass Tip
Note: Battery and charger are NOT included with this 'Solo' version and must be purchased separately as part of the Einhell Power X-Change system.
Figure 1: Einhell TP-ET 18 Li BL-Solo Cordless Compact Router with included accessories. This image displays the main router unit, two collets, two spanner wrenches, an edge milling attachment, a copy sleeve, a suction adapter, a parallel stop, and a compass tip.
4. Postavljanje
4.1 Ugradnja baterije
- Provjerite je li ruter isključen.
- Align the battery pack with the battery port on the top of the router.
- Gurnite baterijski modul u priključak dok se sigurno ne učvrsti na mjestu.
- Za uklanjanje, pritisnite gumb za otpuštanje na baterijskom paketu i izvucite ga.
Figure 2: The Einhell TP-ET 18 Li BL-Solo router is supplied without a battery or charger, highlighting the need for separate purchase of Power X-Change batteries.
4.2 Ugradnja glodala
- Radi sigurnosti, provjerite je li baterija uklonjena.
- Pritisnite i držite gumb za blokiranje vretena kako biste spriječili okretanje vretena.
- Loosen the collet nut using one of the provided spanner wrenches.
- Insert the desired router bit into the collet, ensuring it is seated firmly but not bottomed out.
- Tighten the collet nut securely with the spanner wrench while holding the spindle lock.
Slika 3: Krupni plan view of the spindle lock button and collet area, essential for safe and easy router bit changes.
4.3 Attaching the Base Plate and Dust Extraction
- The transparent base plate is pre-installed. Ensure it is clean and free of debris.
- To attach the dust extraction adapter, align it with the designated port on the base plate and secure it. This allows connection to an external vacuum cleaner for a cleaner work environment.
Figure 4: The transparent base plate provides visibility of the workpiece during operation. The dust extraction port is visible for connecting a vacuum.
4.4 Adjusting Milling Depth
- Otpustite polugu za podešavanje dubine.
- Rotate the fine adjustment knob to set the desired milling depth. The scale on the side indicates the depth in millimeters.
- Once the desired depth is set, tighten the depth adjustment lever to secure the router in position.
4.5 Attaching Guides (Parallel Stop, Compass Tip, Guide Roller)
Depending on your application, various guides can be attached to the router base for enhanced precision:
- Paralelno zaustavljanje: Used for routing parallel to an edge. Slide the parallel stop into the slots on the router base and secure it at the desired distance from the bit.
- Compass Tip: For cutting perfect circles. Attach the compass tip to the base and pivot it around a central point.
- Guide Roller: For following curved edges or templates. Attach the guide roller to the base, ensuring it makes contact with the guide surface.
5. Upute za rad
5.1 Uključivanje/isključivanje
- To turn the router ON, slide the power switch to the 'I' position.
- To turn the router OFF, slide the power switch to the 'O' position.
5.2 Kontrola brzine
The router features electronic infinitely variable speed control. Adjust the speed dial to match the material and router bit being used. Higher speeds are generally suitable for smaller bits and softer materials, while lower speeds are for larger bits and harder materials.
Figure 5: The speed control dial allows for precise adjustment of the router's RPM to suit different materials and applications.
5.3 Tehnike usmjeravanja
- Uvijek provjerite je li radni komad sigurno pričvršćenamped prije usmjeravanja.
- Pokrenite glodalicu prije nego što dođete u kontakt s radnim komadom.
- Move the router smoothly and consistently along the desired path. Avoid sudden movements or excessive pressure.
- For best results and to prevent kickback, always feed the router against the direction of bit rotation.
- When routing edges, use the edge milling attachment for precise chamfering.
5.4 Skupljanje prašine
For a cleaner work environment and improved visibility, connect a suitable wet/dry vacuum cleaner to the suction adapter. This helps to remove wood chips and dust during operation.
6. Održavanje
6.1 Čišćenje
- Uvijek odspojite bateriju prije čišćenja.
- Regularly clean the router housing, base plate, and collet area to remove dust and debris. Use a soft brush or compressed air.
- Nemojte koristiti agresivna sredstva za čišćenje ili otapala.
6.2 Njega svrdla glodala
- Keep router bits sharp and clean. Dull bits can cause overheating and poor cutting performance.
- Store bits in a protective case to prevent damage.
6.3 Opći pregled
- Check all screws and fasteners regularly to ensure they are tight.
- Inspect the power cord (if applicable, for charger) for damage.
- Ensure all ventilation openings are clear to prevent overheating.
7. Rješavanje problema
| Problem | Mogući uzrok | Otopina |
|---|---|---|
| Ruter se ne pokreće | Baterija nije pravilno umetnuta ili je prazna. | Check battery connection; charge or replace battery. |
| Poor cutting quality / Rough edges | Dull or damaged router bit. Incorrect speed setting. | Replace bit; adjust speed according to material. |
| Pretjerane vibracije | Router bit not properly secured. Damaged bit. | Re-tighten collet nut; replace damaged bit. |
| Motor se pregrijava | Začepljeni ventilacijski otvori. Preopterećenje alata. | Clean ventilation slots; reduce cutting depth/feed rate. |
8. Specifikacije
| Značajka | Specifikacija |
|---|---|
| Model | TP-ET 18 Li BL-Solo |
| Broj dijela | 4350415 |
| Voltage | 18 Volts (Power X-Change) |
| Vrsta motora | Bez četkica |
| Visina podizanja | 40 mm |
| Veličine stezne čahure | 6 mm, 8 mm |
| Maks. brzina rotacije | 3000 RPM (Note: Product description states 3000 RPM, title states 30000 RPM. Please verify with manufacturer for accurate specification.) |
| Dimenzije proizvoda | 9.3 x 9.3 x 18.2 cm |
| Težina artikla | 1.34 kg |
| Materijal | Aluminij, Plastika |
| Izvor napajanja | Napajanje baterijama (Li-ion) |
Figure 6: The Einhell TP-ET 18 Li BL-Solo is part of the Power X-Change family, allowing battery compatibility across a wide range of Einhell tools.
Figure 7: Illustration highlighting the benefits of the PurePOWER brushless motor, including increased lifespan, runtime, and power compared to conventional motors.
9. Jamstvo i podrška
Your Einhell TP-ET 18 Li BL-Solo Cordless Compact Router comes with a 2-year warranty, ensuring safety and durability for your DIY projects. For warranty claims, technical support, or to explore other Einhell products, please visit the official Einhell store or contact customer service.
Službena trgovina robne marke: Einhell Canada Store
10. Videozapisi proizvoda
No official product videos from the seller directly related to the Einhell TP-ET 18 Li BL-Solo Cordless Compact Router were found in the provided data. Videos available were either for related products from other brands, from influencers, or for different Einhell tools.
