1. Uvod
This manual provides detailed instructions for the installation, operation, and maintenance of your Bixolon SRP-330III thermal printer. This model features Serial, Ethernet, and USB connectivity, making it suitable for various point-of-sale and receipt printing applications.
1.1 Sadržaj paketa
Prilikom raspakiranja, molimo provjerite jesu li svi predmeti prisutni:
- Bixolon SRP-330III Thermal Printer
- Korisnički priručnik (ovaj dokument)
- Kabel za napajanje
- Interface Cable (may vary based on specific model variant, e.g., USB, Serial, or Ethernet)
2. Sigurnosne informacije
Please read the following safety precautions carefully before using the printer to ensure safe and optimal performance.
- Ne izlažite pisač vodi ili vlazi.
- Use only the power adapter and cables supplied with the printer.
- Pazite da je pisač postavljen na stabilnu, ravnu površinu.
- Izbjegavajte blokiranje ventilacijskih otvora.
- Ne pokušavajte sami rastavljati ili popravljati pisač. Obratite se kvalificiranom servisnom osoblju.
- Čuvati izvan dohvata djece.
3. Postavljanje
3.1 Raspakiranje i postavljanje
Carefully remove the printer from its packaging. Place the printer in a location with adequate ventilation and away from direct sunlight or heat sources.
Slika 1: Bixolon SRP-330III Thermal Printer. This image shows the black Bixolon SRP-330III thermal printer, viewed from the front-right angle. The printer features a sleek, compact design with a paper output slot at the front and control buttons on the right side of the top panel. The Bixolon logo is visible on the top cover, and an Energy Star label is on the lower left front.
3.2 Spojni kabeli
Connect the necessary cables to the printer and your host system.
- Priključak za napajanje: Spojite kabel za napajanje na priključak za napajanje pisača, a zatim na uzemljenu električnu utičnicu.
- Spajanje sučelja:
- USB: Spojite USB kabel iz USB priključka pisača na dostupan USB priključak na računalu.
- Ethernet: Spojite Ethernet kabel iz LAN priključka pisača na mrežni usmjerivač ili preklopnik.
- Serijski: Connect a Serial cable from the printer's Serial port to the Serial port on your computer or POS system.
3.3 Umetanje termalnog papira
The SRP-330III uses thermal paper rolls. Follow these steps to load a new roll:
- Open the printer cover by pushing the cover open lever (typically located on the top right side of the printer).
- Insert the new thermal paper roll into the paper compartment, ensuring the paper feeds from the bottom of the roll towards the front of the printer.
- Izvucite malu količinu papira izvan rezača.
- Čvrsto zatvorite poklopac pisača dok ne klikne na mjesto.
4. Upute za rad
4.1 Uključivanje/isključivanje
To power on the printer, ensure the power cable is connected and press the power switch (usually located at the rear or side of the printer). To power off, press the power switch again.
4.2 Osnovni ispis
Once the printer is connected and drivers are installed on your host system, you can initiate print jobs from your application. The printer will automatically feed and cut the thermal paper.
4.3 Indikatori statusa
The printer features LED indicators on its control panel to display its current status:
- LED za napajanje: Označava da je pisač uključen.
- LED greške: Illuminates or flashes to indicate an error condition (e.g., paper out, cover open, cutter error).
- Paper Out LED: Indicates that the printer is out of paper or the paper roll is low.
Refer to the troubleshooting section for resolving common error indications.
5. Održavanje
5.1 Čišćenje pisača
Redovito čišćenje pomaže u održavanju performansi pisača i produžuje njegov vijek trajanja.
- Ispisna glava: Gently wipe the thermal print head with a soft, lint-free cloth dampened with isopropyl alcohol. Ensure the printer is off and cooled down before cleaning.
- Platen Roller: Clean the platen roller with a soft cloth damps izopropilnim alkoholom.
- Vanjski: Obrišite vanjski dio casinObrišite mekom, suhom krpom. Ne koristite abrazivna sredstva za čišćenje.
Perform cleaning periodically, especially if print quality degrades.
5.2 Zamjena role papira
When the paper out indicator illuminates or print quality diminishes due to the end of the roll, replace the paper roll as described in Section 3.3.
6. Rješavanje problema
This section addresses common issues you might encounter with your Bixolon SRP-330III printer.
| Problem | Mogući uzrok | Otopina |
|---|---|---|
| Pisač se ne uključuje. | Kabel za napajanje nije spojen; utičnica je neispravna. | Provjerite priključak kabela za napajanje; pokušajte s drugom utičnicom. |
| No printing occurs. | Paper out; printer cover open; interface cable loose; driver issue. | Load paper; close cover; check cable connections; reinstall printer drivers. |
| Zastoj papira. | Improper paper loading; foreign object. | Open cover, carefully remove jammed paper, reload correctly. |
| Loša kvaliteta ispisa. | Dirty print head; low quality paper; incorrect settings. | Clean print head; use recommended thermal paper; check printer settings. |
7. Specifikacije
| Značajka | Detalj |
|---|---|
| Naziv modela | SRP-330III |
| Tehnologija tiska | Termalni linijski tisak |
| Tehnologija povezivanja | Ethernet, USB, serijski |
| Maksimalna crno-bijela rezolucija ispisa | 203 dpi |
| Maksimalna brzina crno-bijelog ispisa | 30 ppm |
| Izlaz za pisač | Jednobojni |
| Dimenzije proizvoda | 20 x 25 x 20 cm (D x Š x V) |
| Težina artikla | 5.46 funti (2.48 kg) |
| Maksimalna veličina medija | 8.5 x 14 inch (A4 Centimeters) |
| Maksimalni ulazni kapacitet listova | 150 |
| Wattage | 50 vata |
| Posebna značajka | Spreman za mrežu |
| Uključene komponente | User manual, power cable, interface cable |
| Broj modela artikla | 8809794035135 |
8. Informacije o jamstvu
The Bixolon SRP-330III thermal printer comes with a dvogodišnje jamstvo proizvođača against manufacturing defects. This warranty covers defects in materials and workmanship under normal use. Please retain your proof of purchase for warranty claims. For detailed warranty terms and conditions, please refer to the official Bixolon webstranicu ili se obratite korisničkoj podršci.
9. Korisnička podrška
If you encounter issues not covered in this manual or require further assistance, please contact Bixolon customer support. Visit the official Bixolon webstranica za kontaktne informacije, preuzimanje upravljačkih programa i dodatne resurse.
Bixolon Official Webstranica: www.bixolon.com
