Uvod
This manual provides comprehensive instructions for the setup, operation, and maintenance of your ZEISS Secacam 7 Classic Trail Camera. Designed for observing wildlife, this camera captures high-quality photos and videos day and night. Please read this manual carefully before using the device to ensure optimal performance and longevity.
Proizvod gotovview
The ZEISS Secacam 7 Classic is a robust trail camera featuring a wireless connection, a 32 GB SD card, and a color LCD display. It is equipped with an infrared flash and a light-sensitive photo sensor for clear recordings in various lighting conditions.
Slika 1: Prednja strana View of ZEISS Secacam 7 Classic. This image shows the front of the trail camera, featuring its camouflage casing, lens, and infrared sensor.
Ključne komponente:
- Objektiv: Snima slike i videozapise.
- Infracrveni senzor: Detects motion and triggers recording.
- Status Indicator & Light Sensor: Provides operational feedback and adjusts settings based on ambient light.
- LED Field (60 LEDs): Provides infrared illumination for night vision.
- Locking Clip: Secures the camera housing.
- Eylet for Attaching Locks: Allows for securing the camera against theft.
- 2.4" TFT-LCD Color Display: Za navigaciju izbornikom i viewsnimanje snimaka.
- Kontrolni gumbi: ON/SETUP/OFF switch, OK, MENU, PLAY, and directional arrows for navigation.
Figure 2: Internal Display and Controls. This image displays the camera with its front cover open, revealing the 2.4-inch color LCD display and the control buttons for operation.
Postavljanje
1. Ugradnja baterije
The ZEISS Secacam 7 Classic requires 8 AA batteries for operation. Ensure to use high-quality alkaline or rechargeable batteries.
- Open the camera's housing by releasing the locking clips.
- Pronađite odjeljak za baterije.
- Insert 8 AA batteries, paying close attention to the correct polarity (+/-) indicated inside the compartment.
- Čvrsto zatvorite odjeljak za baterije.
Figure 3: Battery Installation. This image illustrates the process of inserting AA batteries into the camera's designated compartment.
2. Instalacija SD kartice
A 32 GB SD card is included with your camera. This card is essential for storing photos and videos.
- With the camera housing open, locate the SD card slot, typically near the display.
- Insert the 32 GB SD card into the slot until it clicks into place. Ensure the card is inserted in the correct orientation.
- Za uklanjanje, lagano gurnite karticu dok ne izađe.
3. Montaža kamere
The camera can be mounted using the included mounting girdle.
- Select a suitable location, such as a tree or post, ensuring a clear view željenog područja praćenja.
- Thread the mounting girdle through the designated slots on the back of the camera.
- Securely fasten the girdle around the mounting surface.
- Open the camera's front flap to access the display. The lens is fixed to the front, allowing you to check the coverage area on the display and adjust the camera's angle for optimal positioning.
- Once positioned, close the front flap and secure the locking clips.
Figure 4: Camera Mounted (Closed). This image shows the camera securely attached to a tree, ready for operation.
Figure 5: Camera Mounted (Open for Alignment). This image demonstrates the camera mounted on a tree with its front cover open, allowing for precise alignment using the internal display.
Upute za rad
Powering On/Off and Setup Mode
- To power on the camera and enter setup mode, slide the ON/SETUP/OFF switch to the "SETUP" position. The display will activate.
- To power off the camera, slide the switch to the "OFF" position.
- To activate the camera for monitoring, slide the switch to the "ON" position after completing setup. The status indicator will blink, and the camera will enter monitoring mode.
Navigacija izbornikom
Use the directional arrow buttons (Gore, dolje, lijevo, desno) to navigate through menu options. Press the OK gumb za potvrdu odabira. pritisni JELOVNIK button to access the main menu or go back to the previous screen.
Konfiguriranje postavki
In "SETUP" mode, press the JELOVNIK button to access various settings, including:
- Način rada: Select between Photo, Video, or Photo+Video.
- rezolucija: Set image and video quality.
- Osjetljivost na PIR: Adjust the motion sensor's sensitivity.
- Interval okidanja: Define the delay between consecutive recordings.
- Vrijeme i datum: Postavite trenutno vrijeme i datum.
- Formatirajte SD karticu: Izbriši sve podatke na SD kartici. (Caution: This will delete all stored files.)
Viewing Snimke
In "SETUP" mode, press the IGRATI button to enter playback mode. Use the directional arrows to browse through captured photos and videos. Press OK do view odabranu stavku.
Održavanje
Čišćenje
- Obrišite vanjski dio fotoaparata mekom,amp tkanina.
- For the lens and display, use a specialized lens cleaning cloth and solution to avoid scratches.
- Ensure all ports and seals are free of dirt and debris to maintain water resistance.
Zamjena baterije
Replace batteries when the low battery indicator appears on the display or when performance degrades. Always replace all 8 batteries simultaneously with new ones.
Skladištenje
Kada se fotoaparat ne koristi dulje vrijeme, izvadite baterije kako biste spriječili curenje i pohranite ga na hladnom i suhom mjestu.
Rješavanje problema
| Problem | Mogući uzrok | Otopina |
|---|---|---|
| Kamera se ne uključuje. | Prazne ili nepravilno umetnute baterije. | Provjerite polaritet baterija, zamijenite ih novima. |
| No photos/videos captured. | SD card full, incorrectly inserted, or corrupted; PIR sensitivity too low; camera in OFF mode. | Format or replace SD card; adjust PIR sensitivity; ensure camera is in ON mode. |
| Poor image quality at night. | Infrared LEDs obstructed; low battery power. | Clear any obstructions from LEDs; replace batteries. |
| Zaslon ne radi. | Camera not in SETUP mode; display settings. | Ensure switch is in SETUP position; check display brightness settings in menu. |
Tehnički podaci
| Značajka | Detalj |
|---|---|
| Broj modela | ZEISS SECACAM 7 Classic |
| Prikaz | 2.4" TFT-LCD Color Display |
| Senzor | Infrared Sensor, Light Sensor |
| Noćni vid | 60 Black LEDs (Infrared Flash) |
| Included Memory | SD kartica od 32 GB |
| Povezivost | Wireless, Matter Protocol |
| Izvor napajanja | Napajanje baterijama (8x AA) |
| Radna temperatura | -20 °C ~ 55 °C |
| Dimenzije (DxŠxV) | 14.3 x 12 x 7.5 centimetara |
| Težina | 440 g |
| Rezolucija video snimanja | 1080 p |
| Vrsta montaže | Drvo Mount |
| Unutarnja/vanjska upotreba | Vanjski |
Jamstvo i podrška
Your ZEISS Secacam 7 Classic Trail Camera comes with a standard manufacturer's warranty. An optional 1-year extended warranty may be available for purchase.
For technical support, service, or warranty claims, please contact ZEISS customer service.
- Proizvođač: ZEISS, Carl-Zeiss-Strasse 22, 73447 Oberkochen, Germany
- Uvoznik (Indija): Carl Zeiss India (Bangalore) Pvt Ltd., Plot No. 3, Jigan Link Road, Bommasandra Industrial Area Bangalore 560099 India
- Prvi dostupan datum: 3. lipnja 2024
Molimo sačuvajte dokaz o kupnji u svrhu jamstva.
