AUTO-VOX X8 Monitor Bracket Bendable Suction Cup Mount Instruction Manual

Uvod

The AUTO-VOX X8 Monitor Bracket is a versatile and durable mounting solution for your backup camera monitor. Designed for flexibility and strong hold, it allows you to securely position your monitor in various locations within your vehicle or RV, ensuring optimal viewing angles and enhanced safety. This manual provides detailed instructions for setup, operation, and maintenance.

Ključne značajke

• Svestrana montaža: Securely attach your monitor to RV walls, windows, camping tables, dashboards, or windshields.
• Effortless Installation & Removal: Tool-free setup and removal with no sticky residue left behind.
• Jaka usisna čašica: Provides a rock-solid hold on smooth surfaces, allowing for unlimited repositioning.
• Fleksibilno i podesivo: Features a bendable arm and 360° rotation for precise positioning and optimal viewing kutova.
• Izdržljiv dizajn: Built to withstand bumps, potholes, and extreme temperatures for reliable performance.
• Široka kompatibilnost: Specifically designed for AUTO-VOX Solar 3A Plus, Solar 4B, Solar 5, and WF1 screens.

Image: The AUTO-VOX X8 mount demonstrating its flexible and bendable arm, allowing for various monitor positions within a vehicle.

Image: Close-up of the mount's 360° rotating ball head, highlighting its firm buckle for flexible screen adjustment.

Sadržaj paketa

Prije nastavka instalacije provjerite jesu li svi elementi prisutni:

• AUTO-VOX X8 Monitor Bracket (Bendable Suction Cup Mount)
• 3M Adhesive Pad (for dashboard mounting)
• Electrostatic Film Piece (for windshield mounting)
• Priručnik s uputama

Postavljanje i instalacija

Follow these steps to install your AUTO-VOX X8 Monitor Bracket:

1. Pripremite površinu: Choose a clean, smooth, and flat surface for mounting (e.g., windshield, dashboard, RV wall). Ensure the surface is free of dust, grease, or moisture.
2. Apply Electrostatic Film (Optional, for windshield): If mounting on a windshield, apply the electrostatic film piece to the desired location first. This helps protect the windshield and provides a better surface for the suction cup.
3. Attach 3M Adhesive Pad (Optional, for dashboard): If mounting on a dashboard or textured surface, peel off the protective film from the 3M adhesive pad and firmly press it onto the chosen spot. Allow it to set for a few minutes before attaching the mount.
4. Postavite vakuumsku čašicu: Remove the protective plastic film from the suction cup. Place the suction cup firmly onto the prepared surface or the 3M pad.
5. Osigurajte vakuumsku čašicu: Press down the lever on the suction cup base to create a vacuum seal, ensuring a rock-solid hold.
6. Priključite monitor: Align the back of your compatible AUTO-VOX monitor (Solar 3A Plus/4B/5/WF1) with the mounting bracket on the X8 mount. Slide it into place until it clicks securely.
7. Adjust Initial Angle: Loosen the adjustment knob on the mount's arm to set the desired extension and angle. Tighten the knob to lock it in position.

Image: Visual guide showing the three-step installation process: 1. Clean the surface, 2. Press hard for stronger suction, 3. Press the suction cup fastener.

Operacija

The AUTO-VOX X8 mount offers flexible adjustments for optimal monitor positioning:

• Adjusting Arm Extension: Loosen the knob on the bendable arm to extend or retract the arm, then tighten to secure.
• Tilting the Monitor: The mount's ball head allows for 360° rotation and tilt. Loosen the corresponding knob, adjust the monitor to your preferred viewing angle, and then tighten the knob firmly.
• Repositioning the Mount: To move the entire mount, simply lift the lever on the suction cup base to release the vacuum seal. Reposition the mount and re-secure the suction cup as described in the installation steps.

Održavanje

To ensure optimal performance and longevity of your suction cup mount:

• Očistite vakuumsku čašicu: If the suction cup loses its adhesion, simply wash it with warm water and let it air dry. This will restore its powerful suction capabilities.
• Čista montažna površina: Regularly clean the surface where the mount is attached to prevent dust or debris from compromising the suction.

Image: Illustration showing how washing the suction cup with water easily restores its powerful adhesion.

Rješavanje problema

• Mount is not sticking: Ensure the mounting surface is clean, smooth, and dry. Wash the suction cup with water and let it air dry to restore adhesion. For dashboards, use the provided 3M adhesive pad.
• Monitor does not attach securely: Verify that your monitor has the compatible square slot on its back for the mounting bracket. The X8 mount is designed for AUTO-VOX Solar 3A Plus, Solar 4B, Solar 5, and WF1 screens.
• Limited adjustability: Loosen all adjustment knobs before attempting to reposition the arm or tilt the monitor. Ensure they are tightened firmly after adjustment.

Tehnički podaci

Jamstvo i podrška

For any questions, technical support, or warranty claims regarding your AUTO-VOX X8 Monitor Bracket, please contact AUTO-VOX customer service directly. Refer to the product packaging or the official AUTO-VOX webstranica za kontakt podatke.