1. Uvod
The AstroAI P8 4000A Jump Starter is a versatile and powerful device designed to provide reliable jump-starting for vehicles, act as a portable power bank, and offer emergency lighting. This manual provides essential information for safe and effective use of your device.
2. Sigurnosne informacije
UPOZORENJE: Prije upotrebe ovog proizvoda pročitajte sva sigurnosna upozorenja i upute. Nepoštivanje upozorenja i uputa može uzrokovati strujni udar, požar i/ili ozbiljne ozljede.
- This car starter includes 10 built-in comprehensive protections for enhanced safety. These safety features include reverse polarity, overcurrent, overcharge, overdischarge, high & low temperature protection, reverse connection, over voltage, overload, short circuit, and spark-proof clamps.
- Do not attempt to jump start any engine that exceeds the maximum displacement supported by the jump starter (10L Gas or 8L Diesel).
- Do not crank the engine for more than 3 seconds at a time. Allow the jump starter to cool down for at least 1 minute between each start attempt.
- Ensure the device has at least 50% charge before use.
- Čuvati izvan dohvata djece.
- Ne izlažite proizvod kiši ili mokrim uvjetima.
- Ne rastavljajte proizvod.
Image: AstroAI P8 Jump Starter highlighting its 10 safety protections including reverse polarity, overcurrent, overcharge, overdischarge, high & low temperature protection, reverse connection, over voltage, overload, short circuit, and spark-proof clamps.
3. Sadržaj paketa
- AstroAI P8 Jump Starter Unit
- Pametni kratkospojnici
- USB-C kabel za punjenje
- korisnički priručnik
- Torba za pohranu
Image: The AstroAI P8 Jump Starter, smart jumper cables, USB-C charging cable, user manual, and a storage bag, laid out on a dark background.
4. Značajke proizvoda
- Snažno paljenje pomoću kablova: 4000A peak current for 10L gas and 8L diesel engines. Compatible with motorbikes, cars, SUVs, lawnmowers, tractors, and motorboats.
- Višenamjenska power banka: USB-A output Port works with 5V⎓3A, 9V⎓2A, 12V⎓1.5A (QC 3.0). Serves as a reliable backup power source for electronic devices.
- Kompaktan i prijenosan: Size 7.20in*3.45in*1.53in (183mm*88mm*39mm) for easy carrying and storage in glove boxes and door pockets.
- Višenamjenska LED svjetiljka: Provides 3 modes: illumination, SOS, and strobe for convenient lighting in various scenarios.
- Sveobuhvatna sigurnost: 10 built-in protections for enhanced safety, including reverse polarity, overcurrent, overcharge, overdischarge, high & low temperature protection, reverse connection, over voltage, overload, short circuit, and spark-proof clamps.
Image: The AstroAI P8 Jump Starter demonstrating its three main functions: jump starter, power bank, and LED flashlight.
5. Proizvod je gotovview (Komponente)
The AstroAI P8 features a robust design with clearly marked ports and indicators for ease of use.
- Gumb za napajanje: Activates the device and checks battery level.
- Pokazatelj razine napunjenosti baterije: Displays the remaining charge.
- Priključak za kabel za premosnik: Za spajanje pametnih kablova za paljenje.
- USB-A Output Ports (QC 3.0): Za punjenje vanjskih uređaja.
- USB-C ulazno/izlazni priključak: For charging the jump starter and external devices.
- LED bljeskalica: Multi-mode light for illumination, SOS, and strobe.
Image: The AstroAI P8 Jump Starter with its smart jumper cables connected, ready for use.
6. Punjenje Jump Startera
Before first use, fully charge the AstroAI P8. It is recommended to recharge the unit after each use to maintain battery health.
- Connect the provided USB-C charging cable to the USB-C input/output port on the jump starter.
- Plug the other end of the USB-C cable into a compatible USB wall adapter (not included) or car charger.
- The battery level indicator lights will illuminate and flash, indicating the charging progress. All lights will be solid when fully charged.
Image: The AstroAI P8 Jump Starter connected via USB-C to charge a smartphone and a tablet, demonstrating its power bank functionality.
7. Upute za rad
7.1. Pokretanje vozila pomoću kablova
- Ensure the jump starter is sufficiently charged (at least 50%).
- Connect the smart jumper cables to the jump starter's port. Ensure a secure connection.
- Pričvrstite crveni clamp na pozitivni (+) pol akumulatora vozila.
- Pričvrstite crni clamp na negativni (-) pol akumulatora vozila.
- Check the indicator light on the smart jumper cable. A solid green light indicates a correct connection and readiness to jump start. If it's flashing or red, check connections or refer to troubleshooting.
- Start the vehicle's engine. If it doesn't start immediately, wait at least 1 minute before trying again. Do not crank for more than 3 seconds per attempt.
- Once the vehicle starts, immediately remove the black clamp from the negative terminal, then the red clamp s pozitivnog terminala.
- Disconnect the smart jumper cables from the jump starter.
Image: A person connecting the AstroAI P8 Jump Starter to a car battery, illustrating the process of jump starting a vehicle.
7.2. Korištenje kao power bank
The AstroAI P8 can charge various electronic devices.
- Connect your device's USB charging cable to one of the USB-A output ports or the USB-C port on the jump starter.
- Jump starter će automatski početi puniti vaš uređaj.
7.3. Korištenje LED svjetiljke
The built-in LED flashlight offers multiple modes for different situations.
- Pritisnite i držite gumb za napajanje 3 sekunde da biste uključili svjetiljku (način osvjetljenja).
- Press the power button once to switch to SOS mode.
- Press the power button again to switch to strobe mode.
- Press the power button once more to turn off the flashlight.
Image: A person using the AstroAI P8 Jump Starter's multi-mode LED flashlight under the hood of a car at night.
8. Održavanje
- Spremite startni uređaj na hladnom i suhom mjestu, dalje od izravne sunčeve svjetlosti i ekstremnih temperatura.
- Punite uređaj svakih 3-6 mjeseci, čak i ako se ne koristi, kako biste održali zdravlje baterije.
- Očistite izvana mekom, damp tkanina. Ne koristite jake kemikalije ili abrazivna sredstva za čišćenje.
- Pregledajte kablove i clamps for any damage before each use.
9. Rješavanje problema
| Problem | Mogući uzrok | Otopina |
|---|---|---|
| Vozilo se ne pokreće. | Low charge on jump starter, incorrect connection, or vehicle battery completely dead. | Ensure jump starter is at least 50% charged. Recheck clamp connections. If battery is extremely dead, allow jump starter to connect for a few minutes before attempting to start. |
| Smart jumper cable indicator is red or flashing. | Reverse polarity, short circuit, or other safety protection activated. | Odspojite clamps and re-attach them correctly (red to positive, black to negative). If issue persists, check for short circuits or other battery issues. |
| Jump starter se ne puni. | Neispravan kabel za punjenje ili adapter. | Isprobajte drugi USB-C kabel i adapter za zidnu utičnicu. Provjerite jesu li spojevi sigurni. |
10. Specifikacije
- Model: P8
- Vršna struja: 4000 Amps
- Kompatibilnost motora: Up to 10L Gas or 8L Diesel
- Voltage: 12 volti
- Vrsta baterije: Litij polimer (uključen)
- USB-A izlaz (QC 3.0): 5V⎓3A, 9V⎓2A, 12V⎓1.5A
- USB-C ulaz/izlaz: 5V⎓3A, 9V⎓2A
- Dimenzije: 183 mm x 88 mm x 39 mm (7.20 in x 3.45 in x 1.53 in)
- Težina artikla: 710 g
- Zemlja podrijetla: Kina
11. Jamstvo i podrška
AstroAI products come with a manufacturer's warranty. For detailed warranty information, product support, or to register your product, please visit the official AstroAI webweb-mjesto ili se izravno obratite njihovoj korisničkoj službi. Sačuvajte račun za slučaj reklamacije.
Proizvođač: AstroAI
Kontakt: Support@astroai.com
