Uvod
Thank you for choosing the GDFStudio King Size Upholstered Platform Bed Frame. This manual provides detailed instructions for assembly, usage, and maintenance to ensure safe and proper operation of your new bed frame. Please read all instructions carefully before beginning assembly and retain this manual for future reference.
Važne sigurnosne informacije
- Prije sastavljanja provjerite jesu li svi dijelovi prisutni i neoštećeni. Nemojte koristiti ako bilo koji dio nedostaje ili je slomljen.
- Okvir kreveta sastavite na mekoj, čistoj površini kako biste spriječili ogrebotine.
- It is recommended that two adults assemble this product.
- Ne zatežite vijke previše tijekom sastavljanja.
- Ensure the bed is assembled correctly and does not exceed the weight limit of 800 lbs to prevent collapse and potential injury.
- Držite male dijelove podalje od djece tijekom sastavljanja.
Sadržaj paketa
Before assembly, verify that all components listed below are present in your package. All parts and tools are well-labeled.
- Uzglavlje (1)
- Bočne ograde (2)
- Podnožje (1)
- Središnja potporna greda (1)
- Potporne noge (6)
- Drvene letvice (12)
- Paket hardvera (vijci, podloške, matice, imbus ključ)
Upute za postavljanje i sastavljanje
Follow these steps carefully for proper assembly. Two adults can complete setup within an hour.
- Raspakirajte komponente: Carefully remove all parts from the packaging and lay them out on a soft, clean surface to prevent damage. Identify each component using the provided labels.
- Pričvrstite potporne noge: Secure the 6 support legs to the center support beam and the frame corners using the provided hardware. Ensure they are tightened firmly but do not overtighten.
- Sastavite okvir: Connect the headboard, footboard, and side rails. Align the pre-drilled holes and insert bolts, securing them with washers and nuts. Hand-tighten all connections initially.
Slika: Strana A view of the GDFStudio bed frame, illustrating the connection points of the side rail to the headboard and footboard, with wooden slats visible inside. - Podrška instalacijskog centra: Place the center support beam into the designated slots or brackets within the frame. Secure it according to the instructions, ensuring it is centered and stable.
- Umetnite drvene letvice: Lay the 12 wooden slats across the frame, evenly spaced. Many slats may have pre-drilled holes or clips to secure them to the side rails or center beam. Ensure each slat is properly seated and secured to provide optimal mattress support.
Slika: Detaljna view of the wooden slats, showing how they are positioned and secured within the bed frame structure, providing a sturdy base for the mattress. - Završno zatezanje: Once all components are in place, go back and fully tighten all bolts and screws using the provided Allen wrench. Do not overtighten.
- Mjesto madraca: Your GDFStudio King Size Upholstered Platform Bed Frame does not require a box spring. Place your King size mattress directly onto the assembled slats.
Smjernice za korištenje
To ensure the longevity and safety of your bed frame, please observe the following guidelines:
- Kapacitet težine: The bed frame is designed to support a maximum weight of 800 lbs, including the mattress and occupants. Do not exceed this limit.
- Kompatibilnost madraca: This platform bed frame is designed for a King size mattress. A box spring is not required. Recommended mattress thickness is between 8 and 12 inches.
Image: A technical diagram illustrating the King size dimensions of the bed frame (87.5"L x 83.1"W x 27.5"H) and indicating a maximum weight capacity of 800 lbs and recommended mattress thickness of 8"-12". - Ravnomjerna raspodjela težine: Avoid concentrating heavy loads on a single point of the bed frame. Distribute weight evenly across the mattress and slats.
- Pokret: Prilikom pomicanja okvira kreveta, podignite ga umjesto da ga vučete kako biste spriječili oštećenje nogu ili konstrukcije okvira.
Njega i održavanje
Proper care will help maintain the appearance and structural integrity of your bed frame.
- Čišćenje presvlake: The fabric upholstery is soft, breathable, and wear-resistant. For general cleaning, gently vacuum the fabric to remove dust and debris. For spills or stains, spot clean immediately with a mild fabric cleaner and a soft, damp cloth. Test the cleaner on an inconspicuous area first. Do not saturate the fabric.
Slika: Krupni plan view of the beige fabric upholstery, highlighting its texture and weave, which is designed for comfort and durability. - Pregled okvira: Povremeno provjeravajte sve vijke i matice kako biste bili sigurni da su čvrsto zategnuti. Po potrebi ih ponovno zategnite kako biste održali stabilnost.
- Izbjegavajte jake kemikalije: Do not use abrasive cleaners, strong detergents, or chemical solvents on any part of the bed frame, as these can damage the finish or fabric.
- Izloženost sunčevoj svjetlosti: Avoid prolonged direct exposure to sunlight, which can cause fading of the fabric.
Rješavanje problema
Ako naiđete na bilo kakve probleme s okvirom kreveta, pogledajte sljedeće uobičajene probleme i rješenja:
| Problem | Mogući uzrok | Otopina |
|---|---|---|
| Okvir kreveta je nestabilan ili klimav. | Labavi vijci ili matice. | Check and tighten all assembly hardware. Ensure all support legs are firmly attached and touching the floor. |
| Škripavi zvukovi. | Labavi spojevi ili trenje između dijelova. | Retighten all bolts. Ensure slats are properly seated and not rubbing against the frame. Applying a small amount of lubricant (e.g., paraffin wax) to contact points between wood and metal can help. |
| Letvice se pomiču ili ispadaju. | Improper slat installation or excessive movement. | Ensure all slats are correctly placed in their designated positions and secured if applicable. Verify the center support beam is correctly installed. |
Specifikacije proizvoda
- Marka: GDFStudio
- Broj modela: 336668
- Veličina: Kralj
- Dimenzije proizvoda: 87.5 cm D x 83.1 cm Š x 27.5 cm V
- Boja: Bež
- Materijal: Fabric (Upholstered)
- Materijal okvira: Puno drvo
- Kapacitet težine: 800 lbs
- Kompatibilnost madraca: King size, no box spring needed
- Preporučena debljina madraca: 8" - 12"
- Potrebna montaža: Yes (approx. 1 hour for two adults)
- Njega proizvoda: Spot čisto
- Težina artikla: 103.2 funti
- UPC: 637162317952
Jamstvo i podrška
GDFStudio is committed to providing quality products. For specific warranty details, please refer to the documentation included with your purchase or visit the official GDFStudio website. If you have any questions, require assistance with assembly, or need to report missing/damaged parts, please contact GDFStudio customer support.
GDFStudio Customer Support: Please refer to your purchase receipt or the GDFStudio official webstranica za kontakt podatke.
