1. Važne sigurnosne upute
Always observe the following safety precautions when operating the Einhell TC-RH 1600 rotary hammer drill to prevent electric shock, injury, and fire. Keep these instructions for future reference.
Općenita sigurnost električnog alata
- Sigurnost radnog područja: Radno mjesto održavajte čistim i dobro osvijetljenim. Nered ili tamna područja mogu uzrokovati nesreće. Ne koristite električne alate u eksplozivnim atmosferama, kao što je prisutnost zapaljivih tekućina, plinova ili prašine.
- Električna sigurnost: Utikači električnih alata moraju odgovarati utičnici. Nikada nemojte ni na koji način modificirati utikač. Izbjegavajte kontakt tijela s uzemljenim površinama kao što su cijevi, radijatori, štednjaci i hladnjaci.
- Osobna sigurnost: Uvijek nosite zaštitu za oči, zaštitu za sluh i masku za prašinu. Odjenite se prikladno; izbjegavajte široku odjeću ili nakit. Osigurajte dugu kosu. Budite oprezni, pazite što radite i koristite zdrav razum.
- Upotreba i njega alata: Ne forsirajte električni alat. Koristite odgovarajući električni alat za svoju primjenu. Isključite utikač iz izvora napajanja prije bilo kakvih podešavanja, promjene pribora ili pohranjivanja električnog alata.
Sigurnost specifična za rotacijski čekić
- Nosite štitnike za uši when impact drilling. Exposure to noise can cause hearing loss.
- Use auxiliary handles supplied with the tool. Loss of control can result in personal injury.
- Držite električni alat za izolirane površine za hvatanje kada izvodite radnju u kojoj pribor za rezanje može doći u kontakt sa skrivenim ožičenjem ili vlastitim kabelom.
- Osigurajte izradak. Koristite clampili škripac za držanje obratka. To je sigurnije od korištenja ruke i oslobađa obje ruke za rukovanje alatom.
- Beware of dust. Drilling or chiseling concrete and masonry can create dust containing silica, which can cause respiratory diseases. Use dust extraction and wear a suitable dust mask.
2. Proizvod je gotovview and Included Items
The Einhell TC-RH 1600 is a powerful rotary hammer drill designed for drilling, impact drilling, and chiseling in concrete, masonry, and other tough materials. It features an SDS-plus chuck for quick tool changes and a robust pneumatic impact mechanism.
Image 2.1: The Einhell TC-RH 1600 rotary hammer drill shown with its robust carrying case. The drill features a red and black housing with an auxiliary handle attached.
Uključene stavke:
- Einhell TC-RH 1600 bušilica s čekićem
- Pomoćna ručka
- Zaustavljanje dubine
- Torba za nošenje
- 7-piece SDS-plus Drill Bit Set (2x 6mm, 2x 8mm, 10mm, 12mm, 14mm)
Image 2.2: A 7-piece SDS-plus drill bit set, including various diameters for concrete and reinforced concrete applications. The bits feature carbide tips for durability.
3. Tehničke specifikacije
| Značajka | Specifikacija |
|---|---|
| Model | TC-RH 1600 |
| Ulazna snaga | 1600 W |
| Voltage | 240 V |
| Energija utjecaja | 4 J |
| Tip Chuck | SDS-plus |
| Funkcije | Drilling, Impact Drilling, Chiseling (with/without lock) |
| Sigurnosna značajka | Overload safety clutch |
| Mehanizam udara | Pneumatski |
| Kontrola brzine | Electronic speed adjustment |
| Vibracija Damping | Vibracija-damped main handle |
| Kućište prijenosnika | Robusni aluminij |
4. Postavljanje
4.1 Pričvršćivanje pomoćne ručke
The auxiliary handle provides better control and safety during operation. Loosen the auxiliary handle by turning it counter-clockwise. Slide it over the chuck and position it to your desired angle. Tighten it securely by turning clockwise.
4.2 Inserting/Removing SDS-plus Tools
- Čišćenje: Clean the shank of the SDS-plus tool and apply a thin layer of grease.
- Umetanje: Push the tool into the SDS-plus chuck while rotating it slightly until it locks into place. Pull the tool to check if it is securely seated.
- Uklanjanje: Pull back the locking sleeve on the chuck and pull the tool out.
Bilješka: The SDS-plus system allows for axial movement of the tool, which is normal and necessary for the impact mechanism.
4.3 Postavljanje graničnika dubine
Insert the depth stop into the designated hole on the auxiliary handle. Adjust the depth stop to the desired drilling depth by sliding it in or out. Secure it by tightening the auxiliary handle.
5. Upute za rad
5.1 Odabir načina rada
The TC-RH 1600 offers four functions, selected via a rotary switch:
- Bušenje: For drilling in wood, metal, or plastic without impact.
- Udarno bušenje: Za bušenje u betonu, zidu i kamenu s udarcem.
- Chiseling (with lock): For chiseling applications where the chisel position needs to be fixed.
- Chiseling (without lock): For chiseling applications allowing free rotation of the chisel for easier positioning.
Oprez: Always ensure the tool is unplugged before changing the operating mode.
5.2 Pokretanje i zaustavljanje alata
- Početi: Pritisnite prekidač ON/OFF.
- Zaustaviti: Release the ON/OFF switch. For continuous operation, press the ON/OFF switch and then the lock-on button. To release, press the ON/OFF switch again.
5.3 Kontrola brzine
The tool features electronic speed control. The speed can be adjusted by varying the pressure on the ON/OFF switch. Lighter pressure results in lower speed, while full pressure provides maximum speed. This allows for fine adjustment during delicate work.
6. Održavanje i čišćenje
Regular maintenance ensures the longevity and optimal performance of your Einhell TC-RH 1600 rotary hammer drill. Always unplug the tool from the power supply before performing any maintenance or cleaning.
6.1 Opće čišćenje
- Keep all safety devices, air vents, and the motor housing free of dirt and dust. Wipe the tool with a clean cloth.
- Do not use aggressive cleaning agents or solvents, as these can damage plastic parts.
- Clean the SDS-plus chuck regularly and apply a thin layer of grease to the moving parts to ensure smooth operation.
6.2 Pregled ugljičnih četkica
The carbon brushes are subject to wear. If the motor sparks excessively or the tool stops working, the carbon brushes may need inspection or replacement. This should ideally be performed by a qualified technician.
6.3 Skladištenje
Store the tool and its accessories in the provided carrying case in a dry, frost-free place, out of reach of children. Ensure the tool is clean before storage.
7. Rješavanje problema
| Problem | Mogući uzrok | Otopina |
|---|---|---|
| Alat se ne pokreće. | Nema napajanja; neispravan prekidač; istrošene ugljične četkice. | Check power connection; have switch or carbon brushes checked by a qualified technician. |
| Low impact power. | Incorrect operating mode; worn impact mechanism. | Ensure correct mode (impact drilling/chiseling) is selected; contact service for inspection. |
| Pretjerane vibracije. | Damaged accessory; internal fault. | Check accessory for damage and replace if necessary; contact service. |
| Alat se pregrijava. | Preopterećenje; začepljeni ventilacijski otvori. | Reduce load; clean ventilation slots; allow tool to cool down. |
For problems not listed here or if solutions do not resolve the issue, please contact Einhell customer service or an authorized service center.
8. Jamstvo i podrška
Einhell products are manufactured with care and undergo strict quality controls. This product is covered by a manufacturer's warranty in accordance with country-specific regulations. Please retain your proof of purchase for any warranty claims.
For technical support, spare parts, or warranty inquiries, please contact your local Einhell service center or visit the official Einhell webstranica za kontakt podatke.
Mrežni resursi: www.einhell.com
