1. Uvod
Thank you for choosing the Midea X10 Wet & Dry Cordless Vacuum Cleaner. This manual provides essential information for the safe and efficient operation, maintenance, and troubleshooting of your appliance. Please read it thoroughly before first use and keep it for future reference.
2. Sigurnosne upute
Uvijek slijedite osnovne sigurnosne mjere pri korištenju električnih uređaja kako biste smanjili rizik od požara, strujnog udara ili ozljeda.
- Ovaj uređaj je namijenjen samo za kućnu upotrebu. Ne koristite ga u komercijalne ili industrijske svrhe.
- Do not immerse the appliance, battery, or charging base in water or other liquids.
- Držite kosu, široku odjeću, prste i sve dijelove tijela dalje od otvora i pokretnih dijelova.
- Koristite samo adapter za punjenje koji je isporučio proizvođač.
- Ne koristite uređaj za usisavanje zapaljivih tekućina, poput benzina, niti ga koristite u područjima gdje se one mogu nalaziti.
- Ne skupljajte ništa što gori ili se dimi, poput cigareta, šibica ili vrućeg pepela.
- Ensure the appliance is switched off before connecting or disconnecting the battery pack, or before performing any maintenance.
- Uređaj čuvajte u zatvorenom prostoru na suhom mjestu.
3. Sadržaj paketa
Carefully unpack your Midea X10 and check that all items are present and in good condition. If any items are missing or damaged, contact your retailer.
- Midea X10 Main Unit
- Sklop ručke
- Baza za punjenje
- Adapter napajanja
- Četka za čišćenje
- Valjkasta četka (unaprijed instalirana)
- Spremnik za čistu vodu
- Spremnik za prljavu vodu
- korisnički priručnik
Slika: Midea X10 main unit, charging base, and various accessories including a cleaning brush and roller brush.
4. Proizvod je gotovview
Familiarize yourself with the different parts of your Midea X10 vacuum cleaner.
Slika: Ispred view of the Midea X10 vacuum cleaner, showing the main body, handle, and brush head.
Slika: Strana view of the Midea X10 vacuum cleaner, highlighting the clean and dirty water tanks, and the handle design.
- Ručka
- Zaslon zaslona
- Gumb za napajanje
- Gumb za odabir načina rada
- Spremnik za čistu vodu
- Spremnik za prljavu vodu
- Navlaka za četku s valjkom
- Četka za glavu
- Kontakti za punjenje
5. Postavljanje
5.1 Sastavljanje
- Insert the handle assembly into the main unit until it clicks into place. Ensure it is securely fastened.
- Postavite bazu za punjenje na ravnu, stabilnu površinu u blizini utičnice.
5.2 Punjenje baterije
Before first use, fully charge the appliance. A full charge takes approximately 4-5 hours.
- Spojite adapter za napajanje na bazu za punjenje i uključite ga u zidnu utičnicu.
- Place the Midea X10 onto the charging base. Ensure the charging contacts align.
- The display screen will indicate the charging status. The battery indicator will show a full charge when complete.
Slika: The Midea X10 vacuum cleaner docked on its charging base, connected to power.
5.3 Punjenje spremnika čiste vode
- Press the release button and remove the clean water tank from the main unit.
- Open the tank cap and fill with clean tap water. You may add a small amount of non-foaming floor cleaning solution if desired (follow solution manufacturer's instructions). Do not exceed the MAX fill line.
- Čvrsto zatvorite čep spremnika i ponovno umetnite spremnik čiste vode u glavnu jedinicu dok ne klikne.
6. Upute za rad
6.1 Uključivanje/isključivanje
- To turn on: Press the Power Button once. The appliance will start in standard cleaning mode.
- To turn off: Press the Power Button again.
6.2 Odabir načina čišćenja
The Midea X10 offers different cleaning modes for various needs.
- Standardni način rada: Suitable for daily wet and dry cleaning on hard floors.
- Max način rada: Provides increased suction and water flow for stubborn dirt and messes. Press the Mode Selection Button to switch to Max Mode.
- Način rada suhog usisavanja: For vacuuming dry debris without dispensing water. Press the Mode Selection Button to cycle through modes until Dry Vacuum is selected.
6.3 Čišćenje podova
- Provjerite je li spremnik čiste vode napunjen, a spremnik prljave vode prazan.
- Tilt the main unit back to engage the roller brush and start cleaning.
- Polako pomičite usisavač naprijed-natrag preko područja koje treba očistiti.
- The display screen will show the current mode, battery level, and any alerts.
6.4 Funkcija samočišćenja
After each wet cleaning session, it is recommended to use the self-cleaning function.
- Place the vacuum cleaner back on the charging base.
- Provjerite ima li dovoljno čiste vode u spremniku za čistu vodu.
- Press and hold the Mode Selection Button for 3 seconds to activate the self-cleaning cycle.
- The appliance will run a cycle to clean the roller brush and internal pathways.
- Once complete, empty the dirty water tank.
7. Održavanje
Regular maintenance ensures optimal performance and extends the lifespan of your Midea X10.
7.1 Pražnjenje spremnika prljave vode
Ispraznite spremnik za prljavu vodu nakon svake upotrebe ili kada se pojavi indikator 'Spremnik za prljavu vodu pun'.
- Pritisnite gumb za otpuštanje i uklonite spremnik za prljavu vodu.
- Pažljivo otvorite spremnik i ispraznite prljavu vodu.
- Temeljito isperite spremnik i njegov filter čistom vodom.
- Pustite da se svi dijelovi potpuno osuše na zraku prije ponovnog sastavljanja.
7.2 Čišćenje valjkaste četke
The roller brush should be cleaned regularly, especially after the self-cleaning cycle.
- Isključite uređaj i uklonite ga s baze za punjenje.
- Otvorite poklopac valjkaste četke.
- Remove the roller brush. Use the provided cleaning brush to remove any hair or debris.
- Isperite valjkastu četku pod tekućom vodom.
- Prije ponovne ugradnje, ostavite valjkastu četku da se potpuno osuši na zraku.
Slika: Odozgo prema dolje view of the Midea X10 brush head, showing the roller brush and its cover.
7.3 Čišćenje filtra
The filter in the dirty water tank should be cleaned regularly to maintain suction power.
- Uklonite spremnik za prljavu vodu.
- Remove the filter assembly from the tank.
- Isperite filtar pod tekućom vodom dok ne bude čist.
- Allow the filter to air dry completely before reassembling. Do not use the appliance with a wet filter.
7.4 Skladištenje
When not in use for an extended period, ensure the appliance is clean, dry, and fully charged. Store it in a cool, dry place.
8. Rješavanje problema
If you encounter issues with your Midea X10, refer to the following table for common problems and solutions.
| Problem | Mogući uzrok | Otopina |
|---|---|---|
| Aparat se ne uključuje | Baterija je ispražnjena | Napunite bateriju do kraja. |
| Nema točenja vode | Clean water tank is empty or incorrectly installed | Fill the clean water tank and ensure it is properly seated. |
| Loše usisavanje | Spremnik za prljavu vodu je pun ili je filter začepljen | Empty and clean the dirty water tank and filter. |
| Valjkasta četka se ne okreće | Roller brush is jammed or incorrectly installed | Remove and clean the roller brush, check for obstructions, and reinstall correctly. |
| Propuštanje | Tanks not properly sealed or damaged | Ensure both clean and dirty water tanks are correctly installed and sealed. Check for cracks or damage. |
Ako problem i dalje postoji nakon isprobavanja ovih rješenja, obratite se korisničkoj podršci.
9. Specifikacije
- Model: 38212339
- Marka: Midea
- Vlast: 220 W
- Baterija Voltage: 22.2 V
- Maksimalno vrijeme rada: Do 35 minuta
- Posebne karakteristike: Cordless, Wet/Dry Cleaning
- Vrsta filtra: Replaceable media
- Preporučene površine: Sve vrste podova
- Izvor napajanja: Napajanje na baterije
10. Jamstvo i podrška
Your Midea X10 Wet & Dry Cordless Vacuum Cleaner is covered by a manufacturer's warranty. Please refer to the warranty card included in your package for specific terms and conditions.
For technical support, spare parts, or warranty claims, please contact Midea customer service or your local retailer. Keep your purchase receipt as proof of purchase.
