KAIWEETS KT301P Tražilica prekidača i KT301T GFCI Tester utičnica Korisnički priručnik

Uvod

This manual provides detailed instructions for the safe and effective use of your KAIWEETS KT301P Circuit Breaker Finder and KAIWEETS KT301T GFCI Outlet Tester. These tools are designed to assist in identifying circuit breakers, testing outlet wiring, and verifying GFCI functionality in residential and commercial electrical systems. Please read this manual thoroughly before operation and retain it for future reference.

Image: The KAIWEETS KT301P Circuit Breaker Finder (left) and two KAIWEETS KT301T GFCI Outlet Testers (right), showcasing kompletan set proizvoda.

Sigurnosne informacije

Always observe the following safety precautions to prevent injury and damage to the devices:

• Do not use the devices if they appear damaged or are not operating correctly.
• Ensure the devices are rated for the voltage and current of the circuit being tested. These devices are designed for North American 3-wire 120V outlets.
• Always assume circuits are live until verified otherwise.
• Nosite odgovarajuću osobnu zaštitnu opremu (OZO), kao što su zaštitne naočale i izolirane rukavice, pri radu s električnim sustavima.
• Do not attempt to open or modify the devices. There are no user-serviceable parts inside.
• Keep the devices dry and clean. Avoid exposure to moisture or extreme temperatures.
• The KT301P Circuit Breaker Finder is rated CAT II 125V. The KT301T GFCI Outlet Tester is rated CAT II 110-125V. Adhere to these safety ratings.

Proizvod gotovview

KAIWEETS KT301P Circuit Breaker Finder (Receiver)

• LCD zaslon: Shows signal strength, voltage, and NCV status.
• Function Button (FUNC): Toggles between modes.
• Gumb za napajanje: Uključuje/isključuje uređaj.
• NCV senzor: Detektira beskontaktni volumentage.
• LED indikator: Pruža vizualnu povratnu informaciju.

KAIWEETS KT301T GFCI Outlet Tester (Transmitter)

• LCD zaslon: Prikazuje volumen u stvarnom vremenutage, wiring status, and GFCI test results.
• Wiring Status Indicators: LEDs (Green/Orange) for correct/faulty wiring.
• Gumb TEST: Initiates GFCI trip test.
• Gumb RESET: Resets the GFCI after a trip test.
• Gumb za napajanje: Uključuje/isključuje uređaj.

Postavljanje

Both devices are typically ready for use out of the box. Ensure any protective films are removed from the displays. No battery installation is typically required for the KT301T as it draws power from the outlet. The KT301P receiver may require batteries (check packaging for type and installation instructions if applicable, usually AAA or 9V).

Upute za rad

A. Using the KT301P Circuit Breaker Finder

1. Spojite odašiljač: Plug the KT301T GFCI Outlet Tester (acting as the transmitter) into the outlet connected to the circuit you wish to identify. Ensure the outlet is live.
2. Uključi prijemnik: Turn on the KT301P Circuit Breaker Finder (receiver).
3. First Scan (Learn Mode):

   Slowly scan the receiver along the circuit breakers in your electrical panel. The receiver will emit audible and visual indications. During this "Learn" phase, ignore these initial indications. The device is mapping the electrical signatures of the breakers.

   

   Image: Illustration of the first scan (Learn mode) where the receiver is passed over circuit breakers in a panel, showing a green indication.
4. Second Scan (Locate Mode):

   Scan the circuit breakers again, moving slowly. The receiver will now accurately identify the correct breaker associated with the plugged-in transmitter by providing a distinct audible tone and a strong visual signal on its LCD display.

   

   Image: The KT301P receiver accurately identifying a circuit breaker with a clear red visual indication and sound icon.

   

   Image: Illustration of the second scan (Locate mode) where the receiver pinpoints the correct circuit breaker with a red indication and audible alert.
5. Beskontaktni svtage (NCV) Testing:

   The KT301P receiver also functions as an NCV tester. Hold the NCV sensor near wires, outlets, or other electrical components to detect the presence of AC voltage without direct contact. The device will provide visual and audible alerts if voltage je otkriven.

   

   Image: A hand holding the KT301P receiver near an electrical outlet, demonstrating its non-contact voltage detection capability with a red light and sound icon.

B. Using the KT301T GFCI Outlet Tester

1. Uključite u utičnicu: Insert the KT301T GFCI Outlet Tester into a standard 3-prong 120V North American outlet.
2. Read Wiring Status: The LCD display will immediately show the real-time voltage and the wiring status. The bottom LED indicators will also illuminate (Green for correct, Orange for fault).


Image: The KT301T GFCI Outlet Tester displaying wiring fault detection and voltage. It lists various wiring conditions like Correct Wiring, Open Ground, Open Neutral, Missing Live, Live & Ground Reversed, and Live & Neutral Reversed.



Image: A grid showing different wiring fault indications on the KT301T, including Correct Wiring, Open Ground, Open Neutral, Missing Live, Live & Ground Reversed, and Live & Neutral Reversed Open Ground, each with a distinct display and LED pattern.

3. GFCI Trip Test:

   For GFCI outlets, press the TEST button. A functional GFCI outlet should trip, cutting power to the outlet. The tester's display will indicate a successful trip (e.g., "PAS" or similar). If the GFCI does not trip, it indicates a fault and the GFCI should be replaced.

   After testing, press the RESETIRANJE button on the GFCI outlet itself to restore power.

   

   Image: Comparison of the KT301T testing a standard outlet (displaying voltage) and a GFCI outlet (displaying "PAS" after a successful trip test).

4. Interpreting Display and Indicators:

   The large LCD screen provides detailed information. Refer to the legend on the device or in this manual for specific fault indications. Green LEDs typically signify correct wiring, while orange/red LEDs indicate a fault.

   

   Image: The KT301T GFCI Outlet Tester highlighting its features: auto-hold data, GFCI and standard outlet testing, intuitive wiring condition display, bright LED indicators, low battery alert, and 5-minute auto power-off.

   

   Image: The KT301T GFCI Outlet Tester plugged into an outlet, showcasing its 1.8-inch backlit LCD color screen displaying voltage and correct wiring status, with icons for various features.

5. Funkcija automatskog zadržavanja: The KT301T retains the latest outlet test results and voltage reading for 5 minutes even after unplugging, allowing for convenient review.
6. Automatsko isključivanje: The KT301T features a 5-minute auto power-off to conserve energy.

Održavanje

• Čišćenje: Wipe the devices with a dry, soft cloth. Do not use abrasive cleaners or solvents.
• Skladištenje: Uređaje čuvajte na hladnom i suhom mjestu, dalje od izravne sunčeve svjetlosti i ekstremnih temperatura.
• Battery Replacement (KT301P): If the KT301P receiver uses batteries, replace them when the low battery indicator appears on the display. Refer to the battery compartment for the correct battery type and orientation.

Rješavanje problema

Tehnički podaci

Jamstvo i podrška

KAIWEETS products are designed for reliability and performance. For specific warranty information, please refer to the warranty card included with your product or visit the official KAIWEETS website. For technical support, troubleshooting assistance, or to inquire about replacement parts, please contact KAIWEETS customer service through their official channels.

You can visit the KAIWEETS Store for more information: KAIWEETS Official Store