ESBE CRK210 Controller User Guide

ESBE CRK210 Controller

ESBE serije CRK210 su kombinirani pogoni s kontrolerima. Asortiman CRK210 nudi stalnu kontrolu temperature polaza za uređaje s kombiniranom funkcijom grijanja i hlađenja. Serija CRK210 namijenjena je za korištenje s ventilima serije VRx.

Operacija

• The CRK210 is a constant temperature controller intended for applications where a constant flow temperature is desired. The controller is integrated with an actuator and is designed to be used with rotating mixing valves series VRx.
• The Series CRK210 consists of two main components: an actuator and a flow temperature sensor. The primary function of the controller is to maintain a constant set temperature at the sensor location. The series includes a T/T2 (main temperature to alternative temperature) setting, which also controls the opening direction of the actuator. This feature is intended for devices with combined heating and cooling functions set by relay. Additional equipment, such as a clock, may be needed to release the relay if the heating/cooling unit lacks an available control signal. Releasing the relay changes the actuator’s working direction to match the source unit’s mode (heating or cooling). Settings are adjusted via a joystick and displayed on a screen.

Introduction of ESBE Self-Adaptive System

The ESBE Self-Adaptive System manages PI factors (Proportional gain and Integral response) by learning system behaviors and addressing issues previously managed by installers. This system ensures smooth controller operation, eliminates issues related to delays or response times, and delivers high control standards and comfort. This makes the CRK210 Series suitable for any system setup or environment.

MONTAŽA

• Napajanje preko 230 V AC adaptera (zajedno s transformatorom, kabelom i zidnom utičnicom).
• Senzor polazne temperature dolazi s uključenim kabelom od 1,5 m (duži kabel dostupan je kao dodatna oprema). Senzor mora biti pažljivo izoliran od temperature okoline.
• Zahvaljujući posebnom sučelju između regulatora serije CRK210 i ESBE serije VRG i VRH, jedinica kao cjelina ima jedinstvenu stabilnost i preciznost pri regulaciji.

Dodatna oprema

• Art. No. 16200700: ARA801 Auxiliary switch kit
• Art. No. 17053100: CRA911 Flow temperature sensor, 5m cable
• Art. No. 17056200: CRA915 UK plug

Odgovarajući ventili za miješanje

• Serija VRG130
• Serija VRG230
• Serija VRG330
• Serija VRH130
• Serija 3MG
• Serija 3G
• Series 3F DN50

Adapter Kompleti
Required adaptor kits for easy fitting onto an ESBE rotary mixing valve series VRx are supplied with each controller. Adaptor kits can also be ordered separately.

• Art. No. 16000500: ESBE valve series VRG, VRH, G, MG, F
• Art. No. 16000600: Meibes
• Art. No. 16000700: Watts
• Art. No. 16000800: Honeywell Corona
• Art. No. 16000900: Lovato
• Art. No. 16001000: PAW
• Art. No. 16001100: Wita Minimix, Maximix

KONTROLER

Technical Data Details

• Ambient temperature: max. +55°C, min. -5°C
• Vrsta senzora: NTC
• Temperature range: Flow temperature sensor +5 to +95°C
• Enclosure rating, Actuator unit: IP41
• Klasa zaštite: II
• Power supply, Actuator unit: 230 ± 10% V AC, 50 Hz
• Power consumption (230 V AC): 10 VA
• Torque (Actuator): 6 Nm
• Running time at max. speed (Actuator): 30s
• ErP Temperature control class: N/A
• Energy efficiency contribution: N/A

Complies with LVD 2014/35/EU, EMC 2014/30/EU, RoHS 2011/65/EU

INSTALACIJA EXAMPLE

Konstantna temperatura polaza koja ide u krug grijanja
CRK210 kontrolira i osigurava postavljenu temperaturu polaza. Regulator je spojen na uređaj s kombiniranom funkcijom grijanja i hlađenja. Spajanje se vrši preko releja, koji kada se otpusti mijenja smjer otvaranja CRK210. Ova značajka omogućuje CRK210 podešavanje principa rada između načina rada grijanja i hlađenja uređaja za grijanje/hlađenje.

Prikazane aplikacije su samo exampupotrebe proizvoda! Prije upotrebe proizvoda u bilo kojoj primjeni, potrebno je provjeriti regionalne i nacionalne propise.