HYPERKIN Competitor Wired Controller User Manual

HYPERKIN Competitor Wired Controller

Hvala na kupnjiasing the Hyperkin The Competitor for Xbox Series X|S, Xbox One, and Windows 10/11 PC – Wired Controller. For your safety and the safety of others, please carefully read this guide before using this product.

1. Plug the provided Type-C cable into the Type-C port located on the TOP of the Hyperkin Xenon.
2. Plug the other end of the cable into an available USB port on your Xbox Series X|S, Xbox One, PC or Steam OS.
3. The controller will vibrate.
4. Click the Nexus button.
5. The ring light will illuminate.

Vaš kontroler je sada spreman za korištenje.

WAKING UP YOUR XBOX CONSOLE USING THE COMPETITOR

If The Competitor is plugged into an Xbox console, you may turn on the console by clicking the Nexus button on The Competitor. After doing so, the console will turn on and the controller Nexus button will illuminate (this may take a few seconds).

Vaš kontroler je sada spreman za korištenje.

PROGRAMMABLE BACK BUTTONS (MAPPING)

To map a button to a back button, hold the Mode Button (marked “M”) on the back of the controller, and your desired back button (M1 or M2) at the same time. The Competitor will vibrate, and the ring light around the Nexus will begin to flash. Release the Mode Button and back button. The Competitor is now in “mapping mode”. Next, click the button you would like mapped to your desired back button. The Competitor will vibrate again, indicating that you have exited “mapping mode” and the selected button has been mapped to your desired back button.

PROGRAMMABLE BACK BUTTONS (UN-MAPPING)

To un-map a button from a back button, hold the Mode Button (marked “M”) and your desired back button. The Competitor will vibrate, and the ring light will begin to flash. Release the Mode Button and back button. The Competitor is now in “mapping mode”. Next, click the same back button. The Competitor will vibrate again, indicating that you have exited “mapping mode” and a button is no longer mapped to that back button.

BACK BUTTON LOCKS

To disable back buttons, slide the switches on the back of The Competitor inwards towards the “locked” indicator to lock the back buttons. Slide outwards to unlock.

REMOVEABLE STICK CAPS
Grip and remove the stick caps in an upward motion. To set new stick caps onto the sticks, align the smaller teeth on the stick caps with the notches on the stick. Press down on the stick caps until they click into place.

SLUŠALICE
Connect your headset audio jack into the bottom of The Competitor.

GUMB ZA ISKLJUČIVANJE MIC-a
Double-tap the Mute Button (microphone symbol) on the front of The Competitor to mute the microphone on a connected headset. An orange glow indicates that your microphone is muted.

FCC obavijest

Ova je oprema testirana i utvrđeno je da je u skladu s ograničenjima za digitalne uređaje klase B, u skladu s dijelom 15 FCC pravila. Ova su ograničenja predviđena za stambene instalacije. Ova oprema generira, koristi i može zračiti radiofrekventnu energiju i, ako se ne instalira i koristi u skladu s uputama, može uzrokovati štetne smetnje radijskim komunikacijama. Međutim, nema jamstva da se smetnje neće pojaviti u određenoj instalaciji. Ako ova oprema uzrokuje štetne smetnje radijskom ili televizijskom prijemu, što se može utvrditi uključivanjem i isključivanjem opreme, korisnik se potiče da pokuša ispraviti smetnje jednom ili više sljedećih mjera:

• Preusmjerite ili premjestite prijemnu antenu.
• Povećajte razmak između opreme i prijemnika.
• Spojite opremu u utičnicu na strujnom krugu različitom od onog na koji je spojen prijemnik.
• Posavjetujte se s prodavačem ili iskusnim tehnikom radijske televizije ili pošaljite e -poštu Support@Hyperkin.com za pomoć. Zaštitni kabeli moraju se koristiti s ovom jedinicom kako bi se osiguralo usklađenost s FCC ograničenjima klase B.

Promjene ili preinake na ovoj jedinici koje nije izričito odobrila strana odgovorna za sukladnost mogu poništiti korisnikovo ovlaštenje za rukovanje ovom opremom.

Izjava o usklađenosti s EU Direktivom

Hyperkin Inc., located at 1939 West Mission Blvd, Pomona, CA 91766, declares under our sole responsibility that the product, Hyperkin Xenon Wired Controller, is in compliance with the essential requirements and other relevant provisions of Low Voltage Direktiva (LVD) 2014/35/EU, RoHS Direktiva 2011/65/EU i nosi oznaku CE.

Potpuna izjava o sukladnosti može se zatražiti e-poštom:

• Email: compliance@hyperkin.com
• Naziv tvrtke: Hyperkin Inc.
• Adresa: 1939 West Mission Blvd, Pomona, CA 91766

© 2026 Hyperkin Inc. Hyperkin® is a registered trademark of Hyperkin Inc. All rights reserved. All other trademarks are the property of their respective owners.