Oxbot R1 High Performance Controller User Guide

Oxbot R1 High Performance Controller

Upoznajte svoj uređaj

Buttons & Controls Overview

• Gumb za napajanje: Pritisnite i držite 3 sekundi za uključivanje/isključivanje.
• Zaslon osjetljiv na dodir: Swipe up, down, left, or right on the home screen to quickly switch between function panels.
• Gumb Natrag: Short press: Go back to the previous menu. Long press (about 1 second): Quickly return to the home screen.

Glavno sučelje gotovoview

1. Naziv uređaja
2. Remote Controller Bluetooth Indicator
3. RF izlazna snaga
4. Jačina RF signala
5. Razina baterije daljinskog upravljača
6. Find Drone Button
7. Vrijeme rada
8. Dugme za vezanje
9. Trim Status Bar
10. Widgeti

Basic Functions & App Operation

Osnovne funkcije
Model Switching: The remote controller can store multiple model profiles (including channel mapping, switch settings, etc.), allowing you to quickly switch between devices.

Koraci:

• On the home screen, swipe left to enter the “Model Selection” menu
• Browse and select the desired model Tap “Switch”.

Binding Function: Binding is required when using the receiver for the first time or after replacing it. This device only supports the ELRS 2.4GHz (ExpressLRS) protocol.

Koraci:

1. Power cycle the device receiver twice (power on then off counts as one cycle). Keep it powered on during the third power-up.
2. Observe the receiver LED. A rapid double flash indicates Bind mode.
3. On the remote controller home screen, tap “Bind” to complete the binding process.

Smart Locate (Find Drone): Smart Locate (Find Drone): Locate your device quickly if it crashes or lands unexpectedly.
(Note: The device must be equipped with a GPS module, and at least 6 satellites must be locked. Accuracy depends on the number of satellites. The displayed location is the coordinate information last returned by the device’s positioning module and is for reference only.)

Koraci:

• On the remote controller, tap “Find Drone
• A location QR code will appear on the screen
• Scan it with your phone to see the device’s last known location  Use map navigation to reach the drop location.

App Connectivity & Control System Tuning
Oxbot App Operation (Remote Controller Configuration) Used for remote controller settings, Bluetooth firmware updates, and viewing the digital user manual.

Koraci:

1. Swipe down on the home screen to open the menu and turn on Bluetooth.
2. Open the Oxbot App on your phone, tap “Add New Device”, then search for and connect to this remote controller.
3. Once connected, you can configure settings and perform firmware updates on your phone.

SpeedyBee App Operation (Wireless Parameter Configuration)
Support wireless connection for adjusting and maintaining device control system parameters.

Koraci:

1. Swipe down on the home screen to open the menu and turn on Bluetooth.
2. Use the included USB-C cable to connect the remote controller to the device control module.
3. Open the SpeedyBee App and tap “+” to search for the remote controller.
4. Dodirnite "Poveži".
5. Once connected, you can adjust device control parameters or update firmware directly from your phone.

USB način rada
When connected to a computer via USB-C cable, two modes are supported:

• Način rada kontrolera za igre: Functions as a professional simulator controller for mainstream simulators.
• Način punjenja: Charges the remote controller.

Customization & Safety Information

1. Prilagodba
   • Custom Control Panel: Swipe left on the home screen to enter “Model Selection”, then tap “Layout” to enter edit mode.
   • You can freely add or replace widgets (such as attitude indicator, channel output monitor, etc.) to create your personalized control interface.(Note: Additional OTA upgrade features, such as theme colors and background customization, are currently under development. Stay tuned.)
2. Sigurnosne upute
   • Sigurnost prije svega: Always remove all external rotating parts before indoor binding, tuning, or power testing.
   • Provjera prije leta: Before powering on, ensure all switches are in their default (safe) positions and the throttle stick is at its lowest position.
   • Antenna Warning: Do not power on or transmit high-power signals without an antenna installed, as this may damage the internal RF module.
   • Usklađenost s propisima: Before use, ensure you understand and strictly comply with local radio and electronic device regulations.

FCC izjava

Ovaj uređaj je u skladu s dijelom 15 FCC pravila. Rad podliježe sljedeća dva uvjeta:

1. Ovaj uređaj ne smije uzrokovati štetne smetnje i
2. Ovaj uređaj mora prihvatiti sve primljene smetnje, uključujući smetnje koje mogu uzrokovati neželjeni rad.

Promjene ili modifikacije koje nije izričito odobrila strana odgovorna za sukladnost mogu poništiti korisnikovo ovlaštenje za rukovanje opremom.

BILJEŠKA: Ova je oprema ispitana i utvrđeno je da je u skladu s ograničenjima za digitalne uređaje klase B, u skladu s dijelom 15 FCC pravila.

Ova su ograničenja osmišljena kako bi pružila razumnu zaštitu od štetnih smetnji u stambenim instalacijama. Ova oprema generira koristi i može zračiti radiofrekventnu energiju i, ako se ne instalira i koristi u skladu s uputama, može uzrokovati štetne smetnje radijskoj komunikaciji. Međutim, nema jamstva da se smetnje neće pojaviti u određenoj instalaciji. Ako ova oprema uzrokuje štetne smetnje radijskom ili televizijskom prijemu, što se može utvrditi uključivanjem i isključivanjem opreme, korisnik se potiče da pokuša ispraviti smetnje jednom ili više sljedećih mjera:

• Preusmjerite ili premjestite prijemnu antenu.
• Povećajte razmak između opreme i prijemnika.
• Spojite opremu u utičnicu na strujnom krugu različitom od onog na koji je spojen prijemnik.
• Obratite se prodavaču ili iskusnom radio/TV tehničaru za pomoć.

The device has been evaluated to meet general RF exposure requirement. The device can be used in portable exposure condition without restriction. The device has been evaluated to meet general RF exposure requirement. The device can be used in an uncontrolled environment without restriction.