Solutions MS-TP Programmable Touch Panel
Obavijest o autorskim pravima
Sav sadržaj ovog priručnika, čije autorsko pravo pripada našoj korporaciji, ne može se klonirati, kopirati ili prevoditi bez dopuštenja tvrtke.
Specifikacije proizvoda i informacije koje se spominju u ovom dokumentu služe samo kao referenca. Možemo promijeniti, izbrisati ili ažurirati bilo koji sadržaj u bilo koje vrijeme i bez prethodne obavijesti.
FCC obavijest
Ovaj je proizvod u skladu s dijelom 15 FCC pravila. Operacija je podložna sljedeća dva uvjeta:
(1) this device may not cause harmful interference, and (2) this device must accept any interference received, includ- ing interference that may cause undesired operation.delete, or update any content at any time and without prior notice.
Ovaj je proizvod ispitan i utvrđeno je da je u skladu s ograničenjima za digitalne uređaje klase A, u skladu s dijelom 15 FCC pravila. Ova su ograničenja osmišljena kako bi pružila razumnu zaštitu od štetnih smetnji u stambenim instalacijama. Ova oprema generira koristi i može zračiti radiofrekventnu energiju i, ako se ne instalira i koristi u skladu s uputama, može uzrokovati štetne smetnje radijskim komunikacijama. Međutim, nema jamstva da se smetnje neće pojaviti u određenoj instalaciji. Ako ova oprema uzrokuje štetne smetnje radijskom ili televizijskom prijemu, što se može utvrditi uključivanjem i isključivanjem opreme, korisnik se potiče da pokuša ispraviti smetnje jednom ili više sljedećih mjera:
- Preusmjerite ili premjestite prijemnu antenu.
- Povećajte razmak između opreme i prijemnika.
- Spojite opremu u utičnicu na strujnom krugu različitom od onog na koji je spojen prijemnik.
- Obratite se prodavaču ili iskusnom radio/televizijskom tehničaru za pomoć.
Klasa A ITE
Klasa A ITE je kategorija svih ostalih ITE koja zadovoljava ograničenja ITE klase A, ali ne i ograničenja ITE klase B. Prodaja takve opreme ne bi trebala biti ograničena, ali sljedeće upozorenje mora biti uključeno u upute za uporabu:
Upozorenje
Rad ove opreme u stambenom okruženju može uzrokovati radio smetnje.
EC Compliance Statement
(klasa A)
Ovim se potvrđuje da je ovaj proizvod u skladu sa zahtjevima navedenim u Direktivama Vijeća o približavanju zakona država članica koje se odnose na Direktivu o elektromagnetskoj kompatibilnosti 2014/30/EU.
Zaštita od prenapona
This product contains sensitive electrical components that may be damaged by electrical spikes, surges, electric shock, lighting strikes, etc. Use of surge protection systems is highly recommended in order to protect and extend the life of
your equipment..
Oprez
The network cable connection method required for this product is direct connection. Please do not cross-connect.
Uvod
The MS-TP programmable touch panel, designed for automated office systems, multimedia rooms, and smart homes, features a configurable interactive user interface and intelligent networking capabilities. This wall-mounted panel, compatible with standard 86-box installations, includes a 720×720 capacitive touchscreen and one RS-232 serial port. It supports diverse applications across industries, including multimedia conference rooms, multi-functional halls, training centers, showrooms, broadcasting studios, and industrial automation.
Ključne značajke
- ARM Cortex-A55 architecture 1.8Ghz
- Android 11.0 system, 4GB DDR4 RAM, 32GB EMMC Flash
- 4 inch 720*720 (1:1) resolution, capacitive touch screen, standard 86 box wall-in design
- Dual-mode operation – functions as either a touchscreen central control or a user terminal.
- Customizable interface and function configuration through PC software
- Sukladan industrijskim standardnim mrežnim komunikacijskim protokolima (TCP/IP, Http, UDP, Webutičnica)
- Standard 1Gbps network port
- Dual power supply mode, supporting POE or an independent DC power supply
Sadržaj paketa
- A1x Programmable Touch Panel (Wall-in)
- 1x 3pin-3.81mm Phoenix Connectors (male)
- 1x 24V/1A Multinational Power Supply (2pin-3.81mm Phoenix Connector)
- 1x zidni nosač
- 2x Bracket Fixing Screw
- 1x korisnički priručnik
Tehnički podaci
| tehnički | |
| CPU: | ARM Cortex-A55 1.8 GHz |
| Operativni sustav: | Android 11 |
| OVAN: | 4GB DDR4 RAM |
| Brza memorija: | 32 GB EMMC Flash |
| rezolucija: | 720*720 |
| Vrsta dodira: | Kapacitivni zaslon osjetljiv na dodir |
| ESD zaštita: | IEC 61000-4-2: ±8kV (pražnjenje kroz zračni jaz) & ±4kV (kontaktno pražnjenje) |
| Veza | |
| 232: | 1x 3-pinski Phoenix konektori |
| LAN/POE: | 1x standardni 10M/100M/1000M Ethernet RJ45 priključak, podržava POE funkciju |
| VLAST: | 1x 2-pin Phoenix Connectors, for power supply or POE |
| DEBUG: | 1x Micro USB, system debugging port |
| Mehanički | |
| Kućište: | Front Pane: Touch Screen; Frame: A uminum A oy Rear Case: P astic |
| Boja: | Front Pane: Back; Frame: Gray Rear Case: White |
| Dimenzije: | 86 mm (D) x 86 mm (Š) x 44 mm (D) |
| Težina: | 192g |
| Napajanje: | 24V DC/1A ili POE |
| Potrošnja energije: | 5W |
| Radna temperatura: | 0°C ~ 40°C / 32°F ~ 104°F |
| Temperatura skladištenja: | -4 ° F ~ 140 ° F / -20 ° C ~ 60 ° C |
| Radna vlažnost: | 20% ~ 80% (relativna vlažnost, bez kondenzacije) |
| Vlažnost skladištenja: | 10% ~ 90% (relativna vlažnost, bez kondenzacije) |
Kontrole rada i funkcije
| Broj | Ime | Opis funkcije |
| 1 | Zaslon osjetljiv na dodir | Capacitive touch screen. The user contro interface can be configured through the configuration too . |
|
2 |
Tipka RESET |
Reboot: After the device boots up, press and ho d the RESET button for more than 1s
less than 5s, then release it, the device wi reboot. The device won’t upload the user projects after rebooting. Reset: After the device boots up, press and ho d the RESET button for more than 5 seconds, then release it, the device writes the user configuration information. The IP wi be restored to the default settings (IP address: 192.168.0.101, subnet mask: 255.255.0.0), the ogin password of the management page wi be initialized to “admin”, the device time wi be initialized to automatic acquisition mode, but user projects won’t be deleted by factory initialization. |
| 3 | Tipka POWER | Koristi se za isključivanje zaslona ili buđenje. |
| 4 | USB priključak | Micro USB priključak. Rezervirani port za otklanjanje pogrešaka sustava. |
|
5 |
LAN/PoE priključak |
Standard 10M/100M/1000M Ethernet RJ45 port with default auto-negotiated speed for device connection, projects uploading & down oading, network communication and debugging. By default, the DHCP function of the contro pane is disabled, and the IP setting is as follows: IP address: 192.168.0.101, subnet mask: 255.255.0.0 |
| 6 | priključak POWER | The power input port (2-PIN phoenix connectors), used for connecting with externa 24V DC power supply. |
|
7 |
RS232 priključak |
Programmable RS232 seria port, which is a 3-pin phoenix connector (ma e), compliant with RS232 communication protocol. The pin-outs of the RS232 port are PIN1 for TX, PIN2 for GND, and PIN3 for RX. |
Upute za montažu
This wall-in touch panel can be mounted on a standard 86 wall box, the mounting steps are as follows:
Korak 1: Install the included wall mounting bracket onto the 86 wall box and fasten it with 2 screws.
Korak 2: Align the back of the touch panel with the slots of the wall bracket and push it in. Press the aluminum edge of the touch panel to ensure that the buckles are in place, and the installation is complete.
To remove the mounted touch panel, insert a screwdriver into the two holes indicated by the arrows and pry the machine out of the bottom box.
FAQ
Q: Can I use this touch panel without surge protection?
A: While surge protection is highly recommended, the touch panel can function without it. However, using surge protection will extend the equipment's lifespan.
Q: What type of network connection is required for this product?
A: The product requires a direct network cable connection method. Do not cross-connect the network cables.
Dokumenti / Resursi
 |
Solutions MS-TP Programmable Touch Panel [pdf] Korisnički priručnik MS-TP Programmable Touch Panel, MS-TP, Programmable Touch Panel, Touch Panel, Panel |