TECTINTER Q103 Bluetooth Controller User Manual

TECTINTER Q103 Bluetooth Controller

Tehnički podaci

• Model: P103
• Kompatibilnost: Android 9.0+, iOS 13.0+, Windows 10+, Switch, PS3
• Povezivost: Bluetooth, 2.4G Wireless, USB (Type-C)
• Radna svtage: DC 3.7V
• Radna struja: < 30mA
• Struja mirovanja: < 5uA
• Punjenje Voltage/struja: DC 5 V/500 mA

Rješavanje problema

• Kontroler se ne povezuje:
  • Provjerite je li kontroler potpuno napunjen.
  • Make sure the correct mode (X, V, S) is selected for your device.
  • Try re-pairing the controller by pressing the PAIR button and searching again on your device.
  • Provjerite je li Bluetooth omogućen na vašem uređaju.
  • For 2.4G mode, ensure the USB dongle is properly inserted.
• Gumbi ne reagiraju:
  • Check if the controller is connected. The LED indicator should be solid.
  • Try resetting the controller (R3 + L3).
  • Test the controller in a different game or application.
• Kašnjenje unosa:
  • Ensure you are within a reasonable range of your device (for Bluetooth/2.4G).
  • Minimizirajte smetnje od drugih bežičnih uređaja.
  • Try connecting via USB cable if available.
• Kontroler se ne puni:
  • Ensure the Type-C cable is securely connected to both the controller and a power source.
  • Isprobajte drugi Type-C kabel ili adapter za napajanje.
  • The LED indicator should show the charging status.

Q103 Funkcionalni dijagram

1. Gumb D-pad
2. Gumb X/Y/A/B
3. HOME Reconnect/Power Button
4. Gumb PAIR
5. Gumb ODABIR
6. TURBO tipka
7. Lijeva joystick/L3 tipka
8. Desni joystick/gumb R3
9. Tipka CLEAR
10. Gumb START
11. L Gumb
12. L2 tipka
13. Priključak za punjenje tipa C
14. R2 tipka
15. R tipka
16. Reset rupa
17. LED
18. Prekidač načina rada

Android / iOS / Windows/QUBE
Android 9.0 / iOS 13.0 / Win 10 i noviji

Bluetooth veza

1. Okrenite prekidač: prebacite na X za ulazak u način X-INPUT.
2. Prva uporaba (uparivanje po uključenju):
   • Press the Pair button to start the pairing, and the LED will blink.
   • Turn on your device’s Bluetooth search and connect the Bluetooth device “Xbox Wireless Controller”.
   • LED lampica uvijek svijetli crveno kada je ponovno spajanje uspješno.
3. Ponovno korištenje (ponovno povezivanje):
   1. Press the HOME button to power on, and the LED will blink slowly.
   2. LED lampica uvijek svijetli crveno kada je ponovno spajanje uspješno.
4. Press the PAIR button to power off the device.

PROMJENI način rada

Bluetooth veza

1. Okrenite prekidač: prebacite na S za ulazak u način rada za prebacivanje.
2. Prva uporaba (uparivanje po uključenju):
   a) Press the Pair button to start pairing, and the LED will blink.
   b) On the Switch console, select Controller
   → Change Grip/order to enter the Switch console pairing interface for pairing.
   LED lampica uvijek svijetli zeleno kada je ponovno povezivanje uspješno.
3. Ponovno korištenje (ponovno povezivanje):
   a) Press the HOME button to power on, and the LED will blink slowly.
   b) The LED is always green when reconnection is successful.
4. Press the PAIR button to power off the device.

ShootingPlus za Android

Android 9.0 i noviji

1. Flip the switch: Switch to V to enter the ShootingPlus mode. ( ShootingPlus App can be downloaded and installed in various mobile app markets.)
2. Prva uporaba (uparivanje po uključenju):
   a) Press the Pair button to start pairing, and the LED will blink.
   b) Turn on your device’s Bluetooth search and connect the Bluetooth device
   “Q103_ V3”
   a) Connection is successful.
3.  Ponovno korištenje (ponovno povezivanje):
   a) Press the HOME button to power on, and the LED will blink slowly.
   b) The LED is always cyan when reconnection is successful.
4. Pritisnite gumb za uparivanje kako biste isključili uređaj.

2.4G receiver mode

• 2.4G wireless connection operation method for PC devices / smart TVs / TV boxes / PS3 hosts/QUBE:
  1. Insert the 2.4G wireless receiver into a PC device/smart TV,/The USB interface of the TV box.
  2. Wave switch: Set to G mode for 2.4G mode.
  3. First use (power on pairing):
     a) Press the PAIR pairing button to start pairing. The LED blue light flashes rapidly,
     The connection is successful, and the LED blue light is constantly on
  4. The LED is always cyan when reconnected-
  5. First use (power on pairing):
     Press the HOME button to power on and reconnect; the LED flashes slowly.
     Successful reconnection, LED blue light stays on
  6. Press the PAIR pairing button to turn off the device
  7. You can start operating the games downloaded and installed on PC devices/smart TV/TV box/PS3 consoles/QUBE.

Nadogradnja firmvera

1. Spojite V file to the Android phone ShootingPlus app for software upgrade.
2. Support USB wired upgrade

Postavke joysticka

• Kalibracija klackalice
• Shake the joystick several times in the off state and then turn on the machine. Please do not touch the joystick when turning on the machine. The joystick will be automatically calibrated.
• Joysticks draw a square or a circle
•  + (default is circle).
• Note: The R3 Button is pressed with the Right Joystick.

Električni parametri

• Radni svtage: DC3.7V
• Radna struja: <30mA
• Struja mirovanja: <5uA
• Specification: DC5V/500mA
• Bluetooth transmission distance: <= 8M Battery capacity: 400mAh
• Vrijeme pripravnosti: 30 dana (potpuno napunjen)

Charging / sleep/wake-up

1. When charging, the LED will blink slowly; When the battery is full, the LED will stay bright.
2. Funkcija spavanja/buđenja:
   In pairing state, the controller will sleep if it’s not paired successfully within 1 minute.
   Connect back state: The controller will sleep if it is not connected back within 1 minute.
   Bluetooth is connected: The controller will sleep if it is not used within 5 minutes.
   Press the Pair button to turn off the device. Short press the HOME button to directly reconnect.
3. If pairing is not successful within 1 minute, it will enter sleep mode.

FCC upozorenje

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, a nd can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cauharmful interferencec e to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Preusmjerite ili premjestite prijemnu antenu.
• Povećajte razmak između opreme i prijemnika.
• Spojite opremu u utičnicu na strujnom krugu različitom od onog na koji je spojen prijemnik.
• Obratite se prodavaču ili iskusnom radio/TV tehničaru za pomoć.

Oprez: Sve promjene ili preinake na ovom uređaju koje proizvođač nije izričito odobrio mogu poništiti vaše ovlaštenje za rukovanje ovom opremom.
Ovaj uređaj je u skladu s dijelom 15 FCC pravila. Rad podliježe sljedeća dva uvjeta:

1. Ovaj uređaj ne smije uzrokovati štetne smetnje i
2. Ovaj uređaj mora prihvatiti sve primljene smetnje, uključujući smetnje koje mogu uzrokovati neželjeni rad.

Ova oprema u skladu je s FCC ograničenjima izloženosti zračenju koja su određena za nekontrolirano okruženje. Ovu opremu treba instalirati i koristiti na minimalnoj udaljenosti od 0 cm između radijatora i vašeg tijela.